.gitlab/issue_templates/Feature Request — DE.md

@@ -0,0 +1,54 @@
+<!-- 
+Danke das du dir die Zeit nimmst und FabAccess besser machen willst.
+
+Feel free to submit features requests in english too, simply use the "Feature Request — EN" template
+instead!
+
+Die Punkte in der Vorlage sind nur Anhaltspunkte, du kannst deine Issue auch gerne anders aufbauen.
+Und mach dir auch keine Gedanken wenn du nicht alles im Detail ausfüllen kannst, eine wenig
+detaillierte Idee ist immernoch besser als gar nicht von der Idee zu hören!
+-->
+
+# Zusammenfassung
+
+<!--
+Wenn du magst, schreib ein paar Sätze was du gerne im API hinzugefügt oder geändert sehen würdest.
+-->
+
+## Problembeschreibung
+<!--
+Hast du ein spezielles Problem was du lösen möchtest? Wenn ja, schilder uns das doch bitte.
+Falls nicht, kannst du diese Sektion gerne weglassen.
+-->
+
+### Existierende (provisorische) Lösungen
+<!--
+Hast du dein Problem auf einem Umweg oder behilfsmäßig gelöst bekommen?
+Falls ja, gibts noch Bereiche die nicht funktionieren? Ist diese Umgehungslösung sehr instabil bzw.
+geht bei updates kaputt oder ist sie einfach nur sehr umständlich und etwas was von FA selber
+unterstützt werden sollte?
+
+Dieser Punkt wird nicht dazu dienen das wir den Request einfach ablehnen, sondern damit wir das
+Problem besser verstehen und beim Entwickeln der Lösung genauer wissen auf welche Punkte wir achten
+müssen.
+-->
+
+## Lösungsvorschalg
+
+<!--
+Hast du dir schon Gedanken gemacht wie die Lösung aussehen sollte oder schon angefangen an einer
+Implementation zu schreiben? Schreib das gerne auf, vorhandene Ansätze sind ein super Start!
+
+Falls nicht mach dir keinen Kopf, das ist absolut keine Vorraussetzung.
+-->
+
+<!-- Gitlab kann quick actions, die Zeile hier fügt zwei passende labels hinzu -->
+/label ~"Feature Request" ~"Cap'n Proto API"
+<!-- Note: Bitte füg das "Backwards-Incompatible Change" label nicht selber an außer du weißt mit
+Gewissheit das deine Änderung das API bricht und ein großes Versionsupdate braucht -->
+
+<!-- Pingt die richtigen Menschen für diese Art von Issue -->
+/cc @fabinfra/fabaccess/api-developers
+
+<!-- vim: textwidth=100
+-->

.gitlab/issue_templates/Feature Request — EN.md

@@ -0,0 +1,51 @@
+<!-- 
+Thank you for suggesting an idea to make FabAccess better.  
+
+Du kannst Feature Request auch in Englisch verfassen, dafür gibts dann das Template 
+"Feature Request — EN"
+
+You don't have to stick to the below template, it's just a suggestion from us. Also don't worry if
+you can't provide much detail, a short idea is still better than not hearing the idea at all!
+-->
+
+# Summary
+
+<!--
+If you want, give a short summary about what you'd like to see added / changed in the API
+-->
+
+## Problem description
+<!--
+Do you have a specific problem that you'd like to solve? If so, describe it to us please.
+If not, feel free to remove this section entirely.
+-->
+
+### Current solution / Alternatives
+<!--
+Do you have a (partial) workaround for the problem or solved the problem a different way?
+If so, are there parts that still don't work? Is your workaround extremely brittle/breaks on updates
+or is simply very annoying and something that should be provided by FA already?
+
+This section is not for us to disregard the request entirely, it simply allows us to potentially
+better understand the problem and know the what parts should be designed carefully
+-->
+
+## Solution idea
+
+<!--
+Do you have a solution in mind already? Maybe you've even started writing an implementation? If so,
+please tell us about it here, existing solutions are a great point to start off with.
+
+If you don't have any concrete idea or code to show for, don't worry, it is really not required.
+-->
+
+<!-- Gitlab supports quick actions, this will automatically assign a few labels to your Issue -->
+/label ~"Feature Request" ~"Cap'n Proto API"
+<!-- Note: please don't attach the "Backwards-Incompatible Change" label unless you already know for
+a fact that your change *will* break the API and require a major release -->
+
+<!-- Pings the correct group for this kind of issue -->
+/cc @fabinfra/fabaccess/api-developers
+
+<!-- vim: textwidth=100
+-->

README.md

@@ -7,10 +7,3 @@ When returning an Interface it may be required to append a dummy valueto work ar
 - whoami @4 () -> ( you :Api.User );
 + whoami @4 () -> ( you :Api.User, dummy :UInt8 = 0  );
 ```
-
-## Docs
-A lot of information (concepts, usage, decisions) about this API can be found at [docs.fab-access.org](https://docs.fab-access.org/books/schnittstellen-und-apis/page/fabaccess-api#bkmrk-fabaccess-api).
-
-See also:
-- [pyfabapi (Python Wrapper)](https://gitlab.com/fabinfra/fabaccess/pyfabapi)
-- [FabAccess-API-cs (C# implementation)](https://gitlab.com/fabinfra/fabaccess/fabaccess-api-cs)

connection.capnp

@@ -43,7 +43,4 @@ struct Session {
     machineSystem @0 : MachineSystem;
     userSystem @1 : UserSystem;
     permissionSystem @2 : PermissionSystem;
-
-    vendor @3 :AnyPointer;
-    # Vendor-specific APIs outside the normal API stability
 }

docs/decisions/0000-use-markdown-architectural-decision-records.md

@@ -0,0 +1,22 @@
+# Use Markdown Architectural Decision Records (MADR)
+
+## Context and Problem Statement
+
+We want to record architectural decisions made in this project.
+Which format and structure should these records follow?
+
+## Considered Options
+
+* [Markdown Architectural Decisions Record (MADR)](https://adr.github.io/madr/)
+* Gitlab issues
+* Formless – No conventions for file format and structure
+
+## Decision Outcome
+
+Chosen option: "Markdown Architectural Decisions Record (MADR)", because
+
+* Markdown is an easy to write textual format requiring no tooling to be easily human readable
+* Markdown is widely supported and is auto-rendered by all git hosting platforms considered
+* Can be easily stored alongside the actual code and documentation since plain-text files play well with git
+* Is not bound to a single hosting platform like Gitlab issues would be
+* Gives a very sensible default template and format for us to use

docs/decisions/0001-require-strong-transport-encryption.md

@@ -0,0 +1,92 @@
+# Require the use of transport encryption
+
+* Status: accepted <!-- optional -->
+* Deciders: @dequbed, @TheJoKlLa, @kjkriegel <!-- optional -->
+
+## Context and Problem Statement
+
+Implementers of the API should use some level of transport encryption for any
+non-local communication because it's not the 2000's anymore and our crypto is
+actually good, cheap and secure.
+
+## Decision Drivers <!-- optional -->
+
+* The software stack in question has a decent amount of security relevance, even when only used in a LAN context.
+* Since most users of the API connect via WLAN and most of those are using PSK, eavesdropping is trivial
+
+## Considered Options
+
+* [TLS]
+* [DTLS]
+* [Noise protocol][noise]
+
+## Decision Outcome
+
+Chosen option: "TLS", because TLS overall is the easiest to implement for the
+remaining stack as it currently stands and most sysadmins have a good
+understanding of the PKI of TLS.
+
+### Positive Consequences <!-- optional -->
+
+* Reliable transport encryption is ensured
+* PKI structure of TLS can easily solve the inherent trust establishment problem in a federated setting
+
+### Negative Consequences <!-- optional -->
+
+* Generating a trusted X.509 certificate is required for federated application incurring either monetary cost or additional setup work
+* Encryption overhead is a relevant factor in ultra-low-powered devices in cases with a for that use-case badly configured server (i.e. not offering ChaCha20 and other computationally cheap algorithms)
+
+## Pros and Cons of the Options <!-- optional -->
+
+### TLS
+
+Use the known and proven TLS protocol <!-- optional -->
+
+* Good, because TLS support is ubiquitous on all platforms
+* Good, because TLS allows to negotiate cipher algorithms allowing different devices to chose the cipher best suited for them
+* Good, because TLS offers extensions, e.g. [ALPN] that make protocol versioning easier
+* Bad, because TLS is not well suited for [SCTP] which the protocol in future wants to switch to
+* Bad, because TLS is inherently very complex and has suffered from many attack vectors, best known e.g. [Heartbleed] and [Logjam] that require extra caution when configuring TLS
+* Bad, because TLS' cipher negotiation (especially below version 1.3) is susceptible to downgrade attacks, especially in the case of a `STARTTLS`-style usage.
+
+### DTLS
+
+Use the [Datagram Transport Layer Security][DTLS] which is an IETF protocol similar to TLS but specifically designed for message-orientated protocols where message losses and reoderings have to be tolerated.
+
+* Good, because it shares most of the advantages of TLS but also [more ergonomically works with SCTP][sctp-dtls]
+* Bad, because DTLS is significantly less well supported than TLS
+* Bad, because DTLS has no equivalent for TLSv1.3 which adds significant improvents over TLSv1.2 in terms of security
+
+### Noise protocol framework
+
+Use encryption based on Noise, a framework with support for mutual and optional authentication, identity hiding, forward secrecy, zero round-trip encryption, and other advanced features. <!-- optional -->
+
+* Good, because it has no design for cipher negotiation making downgrade attacks impossible
+* Good, because the lightweight nature of noise and the ciphers chosen means it has very limited impact compared to TLS or DTLS
+* Good, because noise lends itself very well to a system where encryption keys are shared via side-channel, e.g. by scanning a QR code also containing the address to connect to.
+* Bad, because platform support is very limited compared to TLS/DTLS, although the most important ones i.e. [Rust][noise-rust] (bffhd), [C#](noise-csharp) (Borepin), Python([1][noise-python1], [2][noise-python2]) (pyfabaccess) are covered.
+* Bad, because noise requires more implementation work than TLS in terms of numbers of lines of code and in decisions to make.
+
+## Links <!-- optional -->
+
+* [Transport Layer Security (TLS)][TLS]
+* [Datagram Transport Layer Security (DTLS)][DTLS]
+* [Noise Protocol Framework][noise]
+* [TLS Application-Layer Protocol Negotiation Extension (ALPN)][ALPN]
+* [Stream Control Transmission Protocol (SCTP)][SCTP]
+* [Heartbleed]
+* [LogJam]
+* [Datagram Transport Layer Security for Stream Control Transmission Protocol][sctp-dtls]
+
+[TLS]: https://en.wikipedia.org/wiki/Transport_Layer_Security
+[DTLS]: https://en.wikipedia.org/wiki/Datagram_Transport_Layer_Security
+[noise]: http://www.noiseprotocol.org/
+[ALPN]: https://datatracker.ietf.org/doc/html/rfc7301
+[SCTP]: https://en.wikipedia.org/wiki/Stream_Control_Transmission_Protocol
+[Heartbleed]: https://heartbleed.com/
+[LogJam]: https://weakdh.org/logjam.html
+[sctp-dtls]: https://datatracker.ietf.org/doc/html/rfc6083
+[noise-rust]: https://github.com/mcginty/snow
+[noise-csharp]: https://github.com/Metalnem/noise
+[noise-python1]: https://github.com/plizonczyk/noiseprotocol
+[noise-python2]: https://github.com/tgalal/dissononce

docs/decisions/index.md

@@ -0,0 +1,14 @@
+# Architectural Decision Log
+
+This log lists the architectural decisions for [project name].
+
+<!-- adrlog -- Regenerate the content by using "adr-log -i". You can install it via "npm install -g adr-log" -->
+
+* [ADR-0000](0000-use-markdown-architectural-decision-records.md) - Use Markdown Architectural Decision Records (MADR)
+* [ADR-0001](0001-require-strong-transport-encryption.md) - Require the use of transport encryption
+
+<!-- adrlogstop -->
+
+For new ADRs, please use [template.md](template.md) as basis.
+More information on MADR is available at <https://adr.github.io/madr/>.
+General information about architectural decision records is available at <https://adr.github.io/>.

docs/decisions/template.md

@@ -0,0 +1,72 @@
+# [short title of solved problem and solution]
+
+* Status: [proposed | rejected | accepted | deprecated | … | superseded by [ADR-0005](0005-example.md)] <!-- optional -->
+* Deciders: [list everyone involved in the decision] <!-- optional -->
+* Date: [YYYY-MM-DD when the decision was last updated] <!-- optional -->
+
+Technical Story: [description | ticket/issue URL] <!-- optional -->
+
+## Context and Problem Statement
+
+[Describe the context and problem statement, e.g., in free form using two to three sentences. You may want to articulate the problem in form of a question.]
+
+## Decision Drivers <!-- optional -->
+
+* [driver 1, e.g., a force, facing concern, …]
+* [driver 2, e.g., a force, facing concern, …]
+* … <!-- numbers of drivers can vary -->
+
+## Considered Options
+
+* [option 1]
+* [option 2]
+* [option 3]
+* … <!-- numbers of options can vary -->
+
+## Decision Outcome
+
+Chosen option: "[option 1]", because [justification. e.g., only option, which meets k.o. criterion decision driver | which resolves force force | … | comes out best (see below)].
+
+### Positive Consequences <!-- optional -->
+
+* [e.g., improvement of quality attribute satisfaction, follow-up decisions required, …]
+* …
+
+### Negative Consequences <!-- optional -->
+
+* [e.g., compromising quality attribute, follow-up decisions required, …]
+* …
+
+## Pros and Cons of the Options <!-- optional -->
+
+### [option 1]
+
+[example | description | pointer to more information | …] <!-- optional -->
+
+* Good, because [argument a]
+* Good, because [argument b]
+* Bad, because [argument c]
+* … <!-- numbers of pros and cons can vary -->
+
+### [option 2]
+
+[example | description | pointer to more information | …] <!-- optional -->
+
+* Good, because [argument a]
+* Good, because [argument b]
+* Bad, because [argument c]
+* … <!-- numbers of pros and cons can vary -->
+
+### [option 3]
+
+[example | description | pointer to more information | …] <!-- optional -->
+
+* Good, because [argument a]
+* Good, because [argument b]
+* Bad, because [argument c]
+* … <!-- numbers of pros and cons can vary -->
+
+## Links <!-- optional -->
+
+* [Link type] [Link to ADR] <!-- example: Refined by [ADR-0005](0005-example.md) -->
+* … <!-- numbers of links can vary -->

machine.capnp

@@ -65,11 +65,6 @@ struct Machine {
         releasefortakeover @2 ();
     }
 
-    prodable @16 :Prodable;
-    interface Prodable $CSharp.name("ProdInterface") {
-        prodWithData @0 (data :Data);
-    }
-
     takeover @9 :Takeover;
     interface Takeover $CSharp.name("TakeoverInterface") {
         accept @0 ();

user.capnp

@@ -44,8 +44,53 @@ struct User
 
     cardDESFireEV2 @6 :CardDESFireEV2;
     interface CardDESFireEV2 $CSharp.name("CardDESFireInterface") {
-        # For more details about FabFire specification please see:
-        # https://docs.fab-access.org/books/fabfire-und-nfc-tags/page/fabfire-funktionsprinzip-grundlagen 
+        # Card authentication using NXP/MiFare DESFire cards.
+        # These cards have the ability to restrict access for data on the cards using symmetric
+        # encryption and using a keyed Diffie-Hellman to prevent eavesdropping by any relaying
+        # party.
+        # A card has several "applications", containing up to 32 files. A file can be read or
+        # written. Both kinds of access can be restricted to parties knowing a PSK, on a
+        # file-to-file basis.
+        # The current system uses File 0001 through File 0004:
+        #
+        # File 0001 allows public (i.e. unauthenticated) read access and contains the Strings
+        # "FABACCESS", "DESFIRE", and "1.0" as packed list of UTF-8 encoded zero-terminated strings:
+        # (i.e. "FABACCESS\0DESFIRE\01.0\0")
+        # This file serves as sort of magic identifier allowing a server to verify quickly if it is
+        # able to use this card at all.
+        #
+        # File 0002 too allows public read access and contains:
+        # - An URL-encoded name of the issuing lab as URN in the format "urn:fabaccess:lab:<labname>"
+        #   Examples:
+        #     - "urn:fabaccess:lab:innovisionlab"
+        #     - "urn:fabaccess:lab:Bibliothek%20Neustadt%20Makerspace"
+        #     - "urn:fabaccess:lab:Offene%20Werkstatt%20M%C3%A4rz"
+        # - A valid IRI pointing towards the bffd instance running for this lab. This uffd SHOULD be
+        #   reachable from the internet. Using private use IP addresses or IRIs that resolve to such
+        #   may be necessary for labs behind restrictive firewalls or due to local policy.
+        #   The IRI MUST use the "fabaccess" scheme, and SHOULD NOT contain an userinfo, path, query,
+        #   or fragment part.
+        #   Examples: 
+        #     - "fabaccess://innovisionlab.de/"
+        #     - "fabaccess://192.168.178.65"
+        #     - "fabaccess://fabaccess-server.localnet"
+        # - A zero-terminated list of UTF-8 encoded IRIs giving contact options to notify the issuer
+        #   or owner in case the card has been lost. Issuers SHOULD set one value on card creation and
+        #   MAY allow card owners to change or add values of their choosing.
+        #   Examples:
+        #     - "mailto:lostcard@innovisionlab.de"
+        #     - "https://innovisionlab.de/lostcard"
+        #     - "https://werkstatt-märz.de/cardlost.php?action=submitcardlost"
+        #
+        # File 0003 allows public access or access using a key, at the issuers option.
+        # It contains a token that can be used by the home server of the card owner to identify the
+        # card owner. The format of the token MUST NOT be relied on by any party except the home
+        # server.
+        #
+        # File 0004 restricts read access to a single key known to the home server of the card
+        # owner.
+        # It is empty but by being access restricted allows the home server to validate the card as
+        # being genuine and thus finalizing the authentication of the user.
 
         getTokenList @0 () -> ( token_list :List(Data) );
         # Get a list of all user Token currently bound to an user. This will generally be the number