Thunderlaser RUIDA (*.rd) fablabchemnitz.de.thunderlaser org.inkscape.output.svg.inkscape inkex.py fablabchemnitz_thunderlaser.py Cut Settings Speed,MinPower,MaxPower: Material 35,50,65: Birch Plywood 3 mm 25,50,65: Birch Plywood 4 mm 20,60,70: Birch Plywood 5 mm Speed,MinPower,MaxPower: Material 25,55,70: Acrylic (PMMA) 3 mm 20,55,70: Acrylic (PMMA) 4 mm 15,55,70: Acrylic (PMMA) 5 mm Speed,MinPower,MaxPower: Material 300,26,65: Cardboard (FinnP) 1 mm 80,50,70: Cardboard (FinnP) 3 mm 100,50,70: PU foam 10 mm 30 50 70 Any Cut nothing Red Green Blue Black White Cyan Magenta Yellow Mark Settings Speed,MinPower,MaxPower: Material 1000,8,25: Birch Plywood 1000,7,18: Cardboard (Finnpappe) 30 50 70 Mark nothing Any Red Green Blue Black White Cyan Magenta Yellow See also: http://wiki.fablab-nuernberg.de/w/Nova_35 0.2 Used when rendering curves. Smaller values are smoother. Range: 0.0001 to 5 900 600 false Used for a quick area check togehter with "Move only", or for a clean frame cut afterwards. false Preview. Use together with "Bounding Box" mode for a quick area check. /COM1 USB connection or a file name with a ".rd" extension. The number of the USB or COM port may need adjustment. false Used for debugging and developent only! inkscape-thunderlaser extension from https://github.com/jnweiger/inkscape-thunderlaser (C) 2017 by Jürgen Weigert [juewei@fabmail.org] and contributors. Thanks to Stefan Schuermanns for the descrambler https://stefan.schuermans.info/rdcam/ (and giving instructions with wine!) Thanks to Klaus Kaempf for writing the disassembler https://github.com/kkaempf/ruida for the file format. Version 1.8 all