mightyscape-1.1-deprecated/extensions/fablabchemnitz_destructiveclip.py

#!/usr/bin/env python3
'''
  ---DESTRUCTIVE Clip---
  An Inkscape Extension which works like Object|Clip|Set except that the paths clipped are actually *modified*
  Thus the clipping is included when exported, for example as a DXF file.
  Select two or more *paths* then choose Extensions|Modify path|Destructive clip.  The topmost path will be used to clip the others.
  Notes:-
    * Curves in paths are not supported (use Flatten Beziers).
    * Non-path objects in the selection will be ignored.  Use Object|Ungroup.
    * Paths entirely outside the clipping path will remain untouched (rather than modifying them to an empty path)
    * Complex paths may take a while (there seems to be no way too show progress)
    * Yes, using MBR's to do gross clipping might make it faster
    * No, Python is not my first language (C/C++ is)

  Mark Wilson Feb 2016

  ----

   Edits by Windell H. Oskay, www.evilmadscientit.com, August 2020
        Update calls to Inkscape 1.0 extension API to avoid deprecation warnings
        Minimal standardization of python whitespace
        Handle some errors more gracefully

'''

import inkex
import sys
from inkex.paths import Path


class DestructiveClip(inkex.Effect):

    def __init__(self):
        self.tolerance = 0.0001  # arbitrary fudge factor
        inkex.Effect.__init__(self)
        self.error_messages = []

        self.curve_error = 'Unable to parse path.\nConsider removing curves '
        self.curve_error += 'with Extensions > Modify Path > Flatten Beziers...'

    def approxEqual(self, a, b):
        # compare with tiny tolerance
        return abs(a-b) <= self.tolerance

    def midPoint(self, line):
        # midPoint of line
        return [(line[0][0] + line[1][0])/2, (line[0][1] + line[1][1])/2]

    def maxX(self, lineSegments):
        # return max X coord of lineSegments
        maxx = 0.0
        for line in lineSegments:
            maxx = max(maxx, line[0][0])
            maxx = max(maxx, line[1][0])
        return maxx

    def simplepathToLineSegments(self, path):
        # takes a simplepath and converts to line *segments*, for simplicity.
        # Thus [MoveTo P0, LineTo P1, LineTo P2] becomes [[P0-P1],[P1,P2]]
        # only handles, Move, Line and Close.
        # The simplepath library has already simplified things, normalized relative commands, etc
        lineSegments = first = prev = this = []
        errors = set([])  # Similar errors will be stored only once
        for cmd in path:
            this = cmd[1]
            if cmd[0] == 'M': # moveto
                if first == []:
                    first = this
            elif cmd[0] == 'L': # lineto
                lineSegments.append([prev, this])
            elif cmd[0] == 'Z': # close
                lineSegments.append([prev, first])
                first = []
            elif cmd[0] == 'C':
                # https://developer.mozilla.org/en/docs/Web/SVG/Tutorial/Paths
                lineSegments.append([prev, [this[4], this[5]]])
                errors.add("Curve node detected (svg type C), this node will be handled as a regular node")
            else:
                errors.add("Invalid node type detected: {}. This script only handle type M, L, Z".format(cmd[0]))
            prev = this
        return (lineSegments, errors)

    def linesgmentsToSimplePath(self, lineSegments):
        # reverses simplepathToLines - converts line segments to Move/Line-to's
        path = []
        end = None
        for line in lineSegments:
            start = line[0]
            if end is None:
                path.append(['M', start]) # start with a move
            elif not (self.approxEqual(end[0], start[0]) and self.approxEqual(end[1], start[1])):
                path.append(['M', start]) # only move if previous end not within tolerance of this start
            end = line[1]
            path.append(['L', end])
        return path

    def lineIntersection(self, L1From, L1To, L2From, L2To):
        # returns as [x, y] the intersection of the line L1From-L1To and L2From-L2To, or None
        # http://stackoverflow.com/questions/563198/how-do-you-detect-where-two-line-segments-intersect

        try:
            dL1 = [L1To[0] - L1From[0], L1To[1] - L1From[1]]
            dL2 = [L2To[0] - L2From[0], L2To[1] - L2From[1]]
        except IndexError:
            inkex.errormsg(self.curve_error)
            sys.exit()

        denominator = -dL2[0]*dL1[1] + dL1[0]*dL2[1]
        if not self.approxEqual(denominator, 0.0):
            s = (-dL1[1]*(L1From[0] - L2From[0]) + dL1[0]*(L1From[1] - L2From[1]))/denominator
            t = (+dL2[0]*(L1From[1] - L2From[1]) - dL2[1]*(L1From[0] - L2From[0]))/denominator
            if s >= 0.0 and s <= 1.0 and t >= 0.0 and t <= 1.0:
                return [L1From[0] + (t * dL1[0]), L1From[1] + (t * dL1[1])]
        else:
            return None

    def insideRegion(self, point, lineSegments, lineSegmentsMaxX):
        # returns true if point is inside the region defined by lineSegments.  lineSegmentsMaxX is the maximum X extent
        ray = [point, [lineSegmentsMaxX*2.0, point[1]]]  # hz line to right of point, extending well outside MBR
        crossings = 0
        for line in lineSegments:
            if not self.lineIntersection(line[0], line[1], ray[0], ray[1]) is None:
                crossings += 1
        return (crossings % 2) == 1  # odd number of crossings means inside

    def cullSegmentedLine(self, segmentedLine, lineSegments, lineSegmentsMaxX):
        # returns just the segments in segmentedLine which are inside lineSegments
        culled = []
        for segment in segmentedLine:
            if self.insideRegion(self.midPoint(segment), lineSegments, lineSegmentsMaxX):
                culled.append(segment)
        return culled

    def clipLine(self, line, lineSegments):
        # returns line split where-ever lines in lineSegments cross it
        linesWrite = [line]
        for segment in lineSegments:
            linesRead = linesWrite
            linesWrite = []
            for line in linesRead:
                intersect = self.lineIntersection(line[0], line[1], segment[0], segment[1])
                if intersect is None:
                    linesWrite.append(line)
                else: # split
                    linesWrite.append([line[0], intersect])
                    linesWrite.append([intersect, line[1]])
        return linesWrite

    def clipLineSegments(self, lineSegmentsToClip, clippingLineSegments):
        # return the lines in lineSegmentsToClip clipped by the lines in clippingLineSegments
        clippedLines = []
        for lineToClip in lineSegmentsToClip:
            clippedLines.extend(self.cullSegmentedLine(self.clipLine(lineToClip, clippingLineSegments), clippingLineSegments, self.maxX(clippingLineSegments)))
        return clippedLines

    def fixVHbehaviour(self, elem):
        raw = Path(elem.get("d")).to_arrays()
        subpaths, prev = [], 0
        for i in range(len(raw)): # Breaks compound paths into simple paths
            if raw[i][0] == 'M' and i != 0:
                subpaths.append(raw[prev:i])
                prev = i
        subpaths.append(raw[prev:])
        seg = []
        for simpath in subpaths:
            closed = False
            if simpath[-1][0] == 'Z':
                closed = True
                if simpath[-2][0] == 'L': simpath[-1][1] = simpath[0][1]
                else: simpath.pop()
            for i in range(len(simpath)):
                if simpath[i][0] == 'V': # vertical and horizontal lines only have one point in args, but 2 are required
                    #inkex.utils.debug(simpath[i][0])
                    simpath[i][0]='L' #overwrite V with regular L command
                    add=simpath[i-1][1][0] #read the X value from previous segment
                    simpath[i][1].append(simpath[i][1][0]) #add the second (missing) argument by taking argument from previous segment
                    simpath[i][1][0]=add #replace with recent X after Y was appended
                if simpath[i][0] == 'H': # vertical and horizontal lines only have one point in args, but 2 are required
                    #inkex.utils.debug(simpath[i][0])
                    simpath[i][0]='L' #overwrite H with regular L command
                    simpath[i][1].append(simpath[i-1][1][1]) #add the second (missing) argument by taking argument from previous segment				
                #inkex.utils.debug(simpath[i])
                seg.append(simpath[i])
        elem.set("d", Path(seg))
        return seg
        
    def effect(self):
        clippingLineSegments = None
        pathTag = inkex.addNS('path', 'svg')
        groupTag = inkex.addNS('g', 'svg')
        self.error_messages = []
        for id in self.options.ids:  # the selection, top-down
            node = self.svg.selected[id]
            if node.tag == pathTag:
                path = self.fixVHbehaviour(node)
                if clippingLineSegments is None: # first path is the clipper
                    (clippingLineSegments, errors) = self.simplepathToLineSegments(path)
                    self.error_messages.extend(['{}: {}'.format(id, err) for err in errors])
                else:
                    # do all the work!
                    segmentsToClip, errors = self.simplepathToLineSegments(path)
                    self.error_messages.extend(['{}: {}'.format(id, err) for err in errors])
                    clippedSegments = self.clipLineSegments(segmentsToClip, clippingLineSegments)
                    if len(clippedSegments) != 0:
                        path = str(inkex.Path(self.linesgmentsToSimplePath(clippedSegments)))
                        node.set('d', path)
                    else:
                        # don't put back an empty path(?)  could perhaps put move, move?
                        inkex.errormsg('Object {} clipped to nothing, will not be updated.'.format(node.get('id')))
            elif node.tag == groupTag:  # we don't look inside groups for paths
                inkex.errormsg('Group object {} will be ignored. Please ungroup before running the script.'.format(id))
            else: # something else
                inkex.errormsg('Object {} is not of type path ({}), and will be ignored. Current type "{}".'.format(id, pathTag, node.tag))

        for error in self.error_messages:
            inkex.errormsg(error)

DestructiveClip().run()