adjustments in lasercheck
This commit is contained in:
parent
2929277f6f
commit
7c3339b111
@ -59,9 +59,8 @@
|
||||
<option value="1016x711">1016 x 711 mm (Fusion M2 40)</option>
|
||||
<option value="1219x914">1219 x 914 mm (Fusion Pro 48)</option>
|
||||
</param>
|
||||
<param name="max_cutting_speed" type="float" min="1.000" max="9999.000" precision="2" gui-text="Max. cutting speed (mm/s)">120</param>
|
||||
<param name="max_travel_speed" type="float" min="1.000" max="9999.000" precision="2" gui-text="Max. travel speed (mm/s)">500</param>
|
||||
<param name="cut_travel_factor" type="float" min="0.001" max="10.00" precision="3" gui-text="Factor between cutting/travel moves" gui-description="Usually ~60-80% are cutting time, rest is travel time. Set this factor to express the amount of travel time in relation to cutting time.">0.60</param>
|
||||
<param name="max_cutting_speed" type="float" min="1.000" max="9999.000" precision="2" gui-text="Max. cutting speed (mm/s)">120.0</param>
|
||||
<param name="max_travel_speed" type="float" min="1.000" max="9999.000" precision="2" gui-text="Max. travel speed (mm/s)">500.0</param>
|
||||
<param name="price_per_minute_gross" type="float" min="0.0" max="9999.0" precision="2" gui-text="Price/minute € (gross)">2.0</param>
|
||||
<param name="vector_grid_xy" type="float" min="0.0" max="9999.0" precision="2" gui-text="Vector grid (mm)">12.0</param>
|
||||
</page>
|
||||
|
||||
@ -16,15 +16,13 @@ class LaserCheck(inkex.EffectExtension):
|
||||
- check for elements which have the attribute "display:none" (some groups have this)
|
||||
- inx:
|
||||
- set speed manually or pick machine (epilog) - travel and cut speed are prefilled then
|
||||
- calculate cut estimation with linear or non-linear (epiloog) speeds > select formula or like this
|
||||
- calculate cut estimation with linear or non-linear (epilog) speeds > select formula or like this
|
||||
- select time estimation for specific speed percentage for for all speeds (100,90, ...)
|
||||
- select material (parameters -> how to???)
|
||||
- select power of CO² source
|
||||
- add fields for additional costs like configuring the machine or grabbing parts out of the machine (weeding), etc.
|
||||
- add mode select: cut, engrave
|
||||
- look for lines especially containing id "travelLines-" and sum up travel lines
|
||||
- add some extra seconds for start, stop, removing parts, attaching material, ...
|
||||
- maybe remove totalTravelLength and set manually ...
|
||||
- Handlungsempfehlungen einbauen
|
||||
- verweisen auf diverse plugins, die man nutzen kann:
|
||||
- migrate ungrouper
|
||||
@ -66,9 +64,8 @@ class LaserCheck(inkex.EffectExtension):
|
||||
pars.add_argument('--tab')
|
||||
|
||||
pars.add_argument('--machine_size', default="812x508")
|
||||
pars.add_argument('--max_cutting_speed', type=float, default=500)
|
||||
pars.add_argument('--max_travel_speed', type=float, default=150)
|
||||
pars.add_argument('--cut_travel_factor', type=float, default=0.60)
|
||||
pars.add_argument('--max_cutting_speed', type=float, default=120)
|
||||
pars.add_argument('--max_travel_speed', type=float, default=500)
|
||||
pars.add_argument('--price_per_minute_gross', type=float, default=2.0)
|
||||
pars.add_argument('--vector_grid_xy', type=float, default=12.0) #TODO
|
||||
|
||||
@ -573,27 +570,36 @@ class LaserCheck(inkex.EffectExtension):
|
||||
if so.checks == "check_all" or so.cutting_estimation is True:
|
||||
inkex.utils.debug("\n---------- Cutting time estimation (Epilog Lasers)")
|
||||
totalCuttingLength = 0
|
||||
pathCount = 0
|
||||
totalTravelLength = 0
|
||||
cuttingPathCount = 0
|
||||
travelPathCount = 0
|
||||
|
||||
for element in shapes:
|
||||
if isinstance(element, inkex.PathElement):
|
||||
slengths, stotal = csplength(element.path.transform(element.composed_transform()).to_superpath())
|
||||
totalCuttingLength += stotal
|
||||
pathCount += 1 #each path has one start and one end (if open path) or start=end on closed path. For cutting the we calculate with 2 points because we enter and leave each path ALWAYS
|
||||
totalTravelLength = totalCuttingLength * so.cut_travel_factor
|
||||
if "-travelLine" in element.get('id'): #we use that id scheme together with the extension "Draw Directions / Travel Moves"
|
||||
totalTravelLength += stotal
|
||||
travelPathCount += 1
|
||||
elif "markerId-" in element.get('id'):
|
||||
pass #we skip the path "markerId-<nr>", possibly generated by the extension "Draw Directions / Travel Moves
|
||||
else:
|
||||
totalCuttingLength += stotal
|
||||
cuttingPathCount += 1
|
||||
totalLength = totalCuttingLength + totalTravelLength
|
||||
inkex.utils.debug("total paths={}".format(pathCount))
|
||||
inkex.utils.debug("total cutting paths={}".format(cuttingPathCount))
|
||||
inkex.utils.debug("total travel paths={}".format(travelPathCount))
|
||||
inkex.utils.debug("(measured) cutting length (mm) = {:0.2f} mm".format(self.svg.uutounit(str(totalCuttingLength), "mm"), self.svg.uutounit(str(totalCuttingLength), "mm")))
|
||||
inkex.utils.debug("(estimated) travel length (mm) = {:0.2f} mm".format(self.svg.uutounit(str(totalTravelLength), "mm"), self.svg.uutounit(str(totalTravelLength), "mm")))
|
||||
inkex.utils.debug("(estimated) total length (mm) = {:0.2f} mm".format(self.svg.uutounit(str(totalLength), "mm"), self.svg.uutounit(str(totalLength), "mm")))
|
||||
inkex.utils.debug("(measured) travel length (mm) = {:0.2f} mm".format(self.svg.uutounit(str(totalTravelLength), "mm"), self.svg.uutounit(str(totalTravelLength), "mm")))
|
||||
inkex.utils.debug("(measured) total length (mm) = {:0.2f} mm".format(self.svg.uutounit(str(totalLength), "mm"), self.svg.uutounit(str(totalLength), "mm")))
|
||||
''' from https://www.epiloglaser.com/assets/downloads/fusion-material-settings.pdf
|
||||
Speed Settings: The speed setting scale of 1% to 100% is not linear –
|
||||
"Speed Settings: The speed setting scale of 1% to 100% is not linear –
|
||||
i.e. 100% speed will not be twice as fast as 50% speed. This non-linear
|
||||
scale is very useful in compensating for the different factors that affect engraving time.
|
||||
scale is very useful in compensating for the different factors that affect engraving time."
|
||||
'''
|
||||
for speedFactor in [100,90,80,70,60,50,40,30,20,10,9,8,7,6,5,4,3,2,1]:
|
||||
speedFactorR = speedFactor / 100.0
|
||||
adjusted_speed = 482.4000 / so.max_cutting_speed #empiric - found out by trying for hours ...
|
||||
empiric_scale = 1 + (speedFactorR**2) / 19.0 #empiric - found out by trying for hours ...
|
||||
adjusted_speed = 480.0 / so.max_cutting_speed #empiric - found out by trying for hours ...
|
||||
empiric_scale = 1 + (speedFactorR**2) / 15.25 #empiric - found out by trying for hours ...
|
||||
v_cut = so.max_cutting_speed * speedFactorR
|
||||
v_travel = so.max_travel_speed #this is always at maximum
|
||||
tsec_cut = (self.svg.uutounit(str(totalCuttingLength)) / (adjusted_speed * so.max_cutting_speed * speedFactorR)) * empiric_scale
|
||||
|
||||
Reference in New Issue
Block a user