updated boxes.py

README.md

@@ -1,6 +1,6 @@
 # MightyScape for Inkscape 1.0+
 
-In short: A maintained extension collection for Inkscape 1.0+, working on Windows and Linux. There are **223 extension folders** with **388 .inx files** inside. We also take part at https://inkscape.org/gallery/=extension/ (with single extension uploads).
+In short: A maintained extension collection for Inkscape 1.0+, working on Windows and Linux. There are **220 extension folders** with **386 .inx files** inside. We also take part at https://inkscape.org/gallery/=extension/ (with single extension uploads).
 
 # About MightyScape
 
@@ -16,7 +16,7 @@ At least this repo will help to bring alife some good things and will show hidde
 
 # Credits / Help to develop
 
-   * This is not a repository to steal the work of others. The credits go to each developer, maintainer, commiter, issue reporter and so on.
+   * This is not a repository to steal the work of others. The credits go to each developer, maintainer, commiter, issue reporter and so on. Please have a look at the meta.json in each directory to get information about licenses and authors.
    * All plugins are open source licensed and are fully compatible to be legally inside this repository. This plugin is a fully non-commercial project too
    * All plugins were taken from each git repo's master branch (if git/svn available). There might exist some development branches, fork branches or issue comments which might resolve some issues or enhance functionality of provided plugins. To check for recent github forks use https://techgaun.github.io
    * A lot of plugins were fixed by ourselves in countless hours
@@ -26,21 +26,19 @@ At least this repo will help to bring alife some good things and will show hidde
 # Used software for development
 
    * Gitea and Github for hosting this
-   * GitEye and SourceTree git frontends for commiting
-   * LiClipse and NotePad++ for code
+   * LiClipse for code and git committing
    * regular Python installation (both Linux and Windows)
 
 # Requirements / Tested environment
 
    * tested with Inkscape
        * Windows portable Version (Inkscape 1.2-dev (25cba68, 2021-05-16)) @ Windows 10
-       * Linux dev trunk (https://inkscape.org/de/release/inkscape-master/gnulinux/ubuntu/ppa/dl/) @ Ubuntu 20 LTS
+       * Linux dev trunk (https://inkscape.org/de/release/inkscape-master/gnulinux/ubuntu/ppa/dl/) @ Fedora 33
    * tested using Python 3.8.5 64 Bit and 3.9.4 64 Bit
    * some extensions require custom Python installation/modules. See documentation at our FabLab Chemnitz Wiki (see below).
    * some extensions require additional commands, packages or other installers (see documentation too).
-   * the structure of this repo is intended the following way: all extensions which require exactly one *.py and one *.inx file are kept on the top level /mightyscape-1.X/extensions/fablabchemnitz. So just copy them to your Inkscape's extension directory. All extension which require additional libraries have their own sub directory. You will find redundancies in this repo like node.exe (NodeJS). We did it this way to give easy possibilty to only pick the extensions you want (instead creating ~200 repositories).
 
-# Remaining ToDos
+# Alltime ToDos
 
   * clean code
   * make more precise documentation with more examples
@@ -48,9 +46,7 @@ At least this repo will help to bring alife some good things and will show hidde
 
 # Installation, documentation and examples
 
-MightyScape does not work with any releases or feature branches. Just use "git clone" to get the recent commit from master branch.
-
-Please see at https://y.stadtfabrikanten.org/mightyscape-overview for installation tips like required python modules, file locations and other adjustments.
+The structure of this repo is intended the be easy. Just copy the complete MightyScape folder or the folders you want to your Inkscape's extension directory. You will find redundancies in this repo like node.exe (NodeJS). We did it this way to give easy possibilty to only pick the extensions you want (instead creating ~200 repositories). MightyScape does not work with any releases or feature branches. Just use "git clone" to get the recent commit from master branch. Please see at https://y.stadtfabrikanten.org/mightyscape-overview for installation tips like required python modules, file locations and other adjustments.
 
 # Donate
 

extensions/fablabchemnitz/boxes.py/boxes.py.AgricolaInsert.inx

@@ -8,6 +8,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.AllEdges.inx

@@ -11,6 +11,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>
@@ -47,8 +48,9 @@
     </page>
     <page name="tab_5" gui-text="Slide-on Lids">
         <param name="Lid_angle" type="float" precision="2" max="9999" gui-text="angle" gui-description="angle">90.0</param>
-        <param name="Lid_second_pin" type="bool" gui-text="second_pin" gui-description="second_pin">true</param>
-        <param name="Lid_spring" type="optiongroup" appearance="combo" gui-text="spring" gui-description="spring">
+        <param name="Lid_hole_width" type="int" max="9999" gui-text="hole_width" gui-description='width of the "finger hole" in mm'>0</param>
+        <param name="Lid_second_pin" type="bool" gui-text="second_pin" gui-description="additional pin for better positioning">true</param>
+        <param name="Lid_spring" type="optiongroup" appearance="combo" gui-text="spring" gui-description="position(s) of the extra locking springs in the lid">
             <option value="both">both</option>
             <option value="none">none</option>
             <option value="left">left</option>

extensions/fablabchemnitz/boxes.py/boxes.py.AngledBox.inx

@@ -27,6 +27,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.AngledCutJig.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Arcade.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Atreus21.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.BasedBox.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.BayonetBox.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.BinTray.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.BottleStack.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.BurnTest.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.CardBox.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Castle.inx

@@ -8,6 +8,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.ClosedBox.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.CoffeeCapsuleHolder.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.ConcaveKnob.inx

@@ -17,6 +17,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Console.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Console2.inx

@@ -25,6 +25,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.DinRailBox.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.DiscRack.inx

@@ -17,6 +17,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Display.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.DisplayCase.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.DisplayShelf.inx

@@ -17,6 +17,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.DividerTray.inx

@@ -25,6 +25,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.DoubleFlexDoorBox.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>
@@ -47,7 +48,7 @@
     <object-type>all</object-type>
     <effects-menu>
         <submenu name="Boxes.py">
-            <submenu name="Unstable"/>
+            <submenu name="Boxes with flex"/>
         </submenu>
     </effects-menu>
 </effect>

extensions/fablabchemnitz/boxes.py/boxes.py.DrillBox.inx

@@ -4,10 +4,19 @@
 <id>info.festi.boxes.py.DrillBox</id>
 <param name="generator" type="string" gui-hidden="true">drillbox</param>
 <param name="tab" type="notebook">
+    <page name="tab_0" gui-text="DrillBox">
+        <param name="sx" type="string" gui-text="sx" gui-description="sections left to right in mm. See --sy for format">25*3</param>
+        <param name="sy" type="string" gui-text="sy" gui-description='sections back to front in mm. Possible formats: overallwidth/numberof sections e.g. "250/5"; sectionwidth*numberofsections e.g. "50*5"; section widths separated by ":" e.g. "30:25.5:70'>60*4</param>
+        <param name="h" type="float" precision="2" max="9999" gui-text="h" gui-description="inner height in mm">60</param>
+        <param name="holes" type="int" max="9999" gui-text="holes" gui-description="Number of holes for each size">3</param>
+        <param name="firsthole" type="float" precision="2" max="9999" gui-text="firsthole" gui-description="Smallest hole">1.0</param>
+        <param name="holeincrement" type="float" precision="2" max="9999" gui-text="holeincrement" gui-description="increment between holes">0.5</param>
+    </page>
     <page name="tab_1" gui-text="Default">
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.DrillStand.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.ElectronicsBox.inx

@@ -20,6 +20,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.EuroRackSkiff.inx

@@ -12,6 +12,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FanHole.inx

@@ -20,6 +20,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FlexBox.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FlexBox2.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FlexBox3.inx

@@ -17,6 +17,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FlexBox4.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FlexBox5.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FlexTest.inx

@@ -12,6 +12,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.FlexTest2.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Folder.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.GearBox.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Gears.inx

@@ -11,7 +11,7 @@
         <param name="teeth2" type="int" max="9999" gui-text="teeth2" gui-description="number of teeth in the other size of gears">32</param>
         <param name="shaft2" type="float" precision="2" max="9999" gui-text="shaft2" gui-description="diameter of the shaft2 (zero for same as shaft 1)">0.0</param>
         <param name="dpercentage2" type="float" precision="2" max="9999" gui-text="dpercentage2" gui-description="percent of the D section of shaft 1 (0 for same as shaft 1)">0</param>
-        <param name="modulus" type="float" precision="2" max="9999" gui-text="modulus" gui-description="width of teeth in mm">5</param>
+        <param name="modulus" type="float" precision="2" max="9999" gui-text="modulus" gui-description="size of teeth (diameter / #teeth) in mm">2</param>
         <param name="pressure_angle" type="float" precision="2" max="9999" gui-text="pressure_angle" gui-description="angle of the teeth touching (in degrees)">20</param>
         <param name="profile_shift" type="float" precision="2" max="9999" gui-text="profile_shift" gui-description="in precent of the modulus">20</param>
     </page>
@@ -19,6 +19,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.HeartBox.inx

@@ -17,6 +17,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.HexHoles.inx

@@ -12,6 +12,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.HingeBox.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Hook.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.IntegratedHingeBox.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Keypad.inx

@@ -19,6 +19,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.LBeam.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.LaserClamp.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.LaserHoldfast.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.MagazinFile.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.MakitaPowerSupply.inx

@@ -12,6 +12,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.NemaMount.inx

@@ -21,6 +21,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.NemaPattern.inx

@@ -22,6 +22,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.NotesHolder.inx

@@ -20,6 +20,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.OpenBox.inx

@@ -9,11 +9,16 @@
         <param name="y" type="float" precision="2" max="9999" gui-text="y" gui-description="inner depth in mm (unless outside selected)">100.0</param>
         <param name="h" type="float" precision="2" max="9999" gui-text="h" gui-description="inner height in mm (unless outside selected)">100.0</param>
         <param name="outside" type="bool" gui-text="outside" gui-description="treat sizes as outside measurements that include the walls">true</param>
+        <param name="edgetype" type="optiongroup" appearance="combo" gui-text="edgetype" gui-description="edge type">
+            <option value="F">F</option>
+            <option value="h">h</option>
+    </param>
     </page>
     <page name="tab_1" gui-text="Default">
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.OrganPipe.inx

@@ -37,6 +37,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.OttoBody.inx

@@ -8,6 +8,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.OttoLegs.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.OttoSoles.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.PaintStorage.inx

@@ -17,6 +17,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.PaperBox.inx

@@ -20,6 +20,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.PhoneHolder.inx

@@ -17,6 +17,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Planetary.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Planetary2.inx

@@ -46,6 +46,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Platonic.inx

@@ -19,6 +19,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.PoleHook.inx

@@ -15,6 +15,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Pulley.inx

@@ -31,6 +31,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Rack10Box.inx

@@ -32,6 +32,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Rack19Box.inx

@@ -32,6 +32,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Rack19HalfWidth.inx

@@ -14,6 +14,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.RackBox.inx

@@ -19,6 +19,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.RectangularWall.inx

@@ -160,6 +160,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>
@@ -232,8 +233,9 @@
     </page>
     <page name="tab_10" gui-text="Slide-on Lids">
         <param name="Lid_angle" type="float" precision="2" max="9999" gui-text="angle" gui-description="angle">90.0</param>
-        <param name="Lid_second_pin" type="bool" gui-text="second_pin" gui-description="second_pin">true</param>
-        <param name="Lid_spring" type="optiongroup" appearance="combo" gui-text="spring" gui-description="spring">
+        <param name="Lid_hole_width" type="int" max="9999" gui-text="hole_width" gui-description='width of the "finger hole" in mm'>0</param>
+        <param name="Lid_second_pin" type="bool" gui-text="second_pin" gui-description="additional pin for better positioning">true</param>
+        <param name="Lid_spring" type="optiongroup" appearance="combo" gui-text="spring" gui-description="position(s) of the extra locking springs in the lid">
             <option value="both">both</option>
             <option value="none">none</option>
             <option value="left">left</option>

extensions/fablabchemnitz/boxes.py/boxes.py.RegularBox.inx

@@ -24,6 +24,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.RobotArm.inx

@@ -85,6 +85,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Rotary.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.RoundedBox.inx

@@ -31,6 +31,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.RoyalGame.inx

@@ -11,6 +11,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.SBCMicroRack.inx

@@ -24,6 +24,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.ShutterBox.inx

@@ -18,6 +18,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.SideDoorHousing.inx

@@ -20,6 +20,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.Silverware.inx

@@ -16,6 +16,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.SlatwallCaliper.inx

@@ -13,6 +13,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>

extensions/fablabchemnitz/boxes.py/boxes.py.SlatwallChiselHolder.inx

@@ -21,6 +21,7 @@
         <param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
         <param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
         <param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
+        <param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
         <param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
         <param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
     </page>