<_name>Gear-dev
fablabchemnitz.de.gears_dev
24
1.0
<_option value="MM">Module
<_option value="CP">Circular Pitch
<_option value="DP">Diametral Pitch
<_param name="help" type="description" xml:space="preserve">------------------------------
20.0
false
false
false
0
0
false
4.0
3
3.0
10.0
automatic20 points: best12 points: medium6 points: low
<_param name="help" type="description">Use higher accuracy with lower tooth count. Set Number of spokes to 0 to disable. Set Mount hole diameter to 0 to disable.
false
10
5
5
<_param name="packing" type="description" xml:space="preserve">The matching rack gear is drawn additionally and below the spur gear.
<_param name="gearuse" type="description" xml:space="preserve">Gears:
Be sure to set the document properties to inches or mm if you want real-world dimensions.
For gears to mesh - the size of the teeth on each gear must be the same.
This is why tooth count and Circular Pitch or Metric Module is used to define gears and not radius.
The Circular Pitch, p, is the distance between adjacent teeth around the Pitch Circle.
p = pi * D / z
- where z is the number of teeth on a gear of pitch diameter D.
The SI measure is the Module - which expresses the core ratio of Pitch Diameter to number of Teeth:
m = p / pi = D / z
where:
- Pitch Circle: Radius is equal to the distance from the center of the gear to the pitch point.
- Pitch Point: The point of tangency of the pitch circles of two meshing gears.
<_param name="gearuse2" type="description" xml:space="preserve">Gears:
Pressure angle [in degrees]. Usually 20. Historical: 14.5; High torque gears: 25.
The higher the pressure angle, the stronger the teeth. With higher pressure angles, more effort is needed to turn the gears (due to friction).
Caution: Undercut is currently not generated. E.g. a gear at pressure angle 20 deg and less than 17 teeth would either need a (negative!) profile shifting or will cause undercut. We only produce a warning.
true
all