This repository has been archived on 2023-03-25. You can view files and clone it, but cannot push or open issues or pull requests.
mightyscape-1.1-deprecated/extensions/fablabchemnitz/boxes.py/boxes.py.DividerTray.inx

61 lines
5.8 KiB
XML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="UTF-8"?>
<inkscape-extension xmlns="http://www.inkscape.org/namespace/inkscape/extension">
<name>DividerTray</name>
<id>info.festi.boxes.py.DividerTray</id>
<param name="generator" type="string" gui-hidden="true">dividertray</param>
<param name="tab" type="notebook">
<page name="tab_0" gui-text="DividerTray">
<param name="sx" type="string" gui-text="sx" gui-description="sections left to right in mm. See --sy for format">50*3</param>
<param name="sy" type="string" gui-text="sy" gui-description='sections back to front in mm. Possible formats: overallwidth/numberof sections e.g. "250/5"; sectionwidth*numberofsections e.g. "50*5"; section widths separated by ":" e.g. "30:25.5:70'>50*3</param>
<param name="h" type="float" precision="2" max="9999" gui-text="h" gui-description="inner height in mm (unless outside selected)">100.0</param>
<param name="outside" type="bool" gui-text="outside" gui-description="treat sizes as outside measurements that include the walls">true</param>
<param name="slot_depth" type="float" precision="2" max="9999" gui-text="slot_depth" gui-description="depth of the slot in mm">20</param>
<param name="slot_angle" type="float" precision="2" max="9999" gui-text="slot_angle" gui-description="angle at which slots are generated, in degrees. 0° is vertical.">0</param>
<param name="slot_radius" type="float" precision="2" max="9999" gui-text="slot_radius" gui-description="radius of the slot entrance in mm">2</param>
<param name="slot_extra_slack" type="float" precision="2" max="9999" gui-text="slot_extra_slack" gui-description="extra slack (in addition to thickness and kerf) for slot width to help insert dividers">0.2</param>
<param name="divider_bottom_margin" type="float" precision="2" max="9999" gui-text="divider_bottom_margin" gui-description="margin between box's bottom and divider's">0</param>
<param name="divider_upper_notch_radius" type="float" precision="2" max="9999" gui-text="divider_upper_notch_radius" gui-description="divider's notch's upper radius">1</param>
<param name="divider_lower_notch_radius" type="float" precision="2" max="9999" gui-text="divider_lower_notch_radius" gui-description="divider's notch's lower radius">8</param>
<param name="divider_notch_depth" type="float" precision="2" max="9999" gui-text="divider_notch_depth" gui-description="divider's notch's depth">15</param>
<param name="left_wall" type="bool" gui-text="left_wall" gui-description="generate wall on the left side">true</param>
<param name="right_wall" type="bool" gui-text="right_wall" gui-description="generate wall on the right side">true</param>
<param name="bottom" type="bool" gui-text="bottom" gui-description="generate wall on the bottom">false</param>
</page>
<page name="tab_1" gui-text="Default">
<param name="thickness" type="float" precision="2" max="9999" gui-text="thickness" gui-description="thickness of the material">3.0</param>
<param name="tabs" type="float" precision="2" max="9999" gui-text="tabs" gui-description="width of tabs holding the parts in place in mm (not supported everywhere)">0.0</param>
<param name="debug" type="bool" gui-text="debug" gui-description="print surrounding boxes for some structures">false</param>
<param name="labels" type="bool" gui-text="labels" gui-description="label the parts (where available)">true</param>
<param name="reference" type="float" precision="2" max="9999" gui-text="reference" gui-description="print reference rectangle with given length (zero to disable)">100</param>
<param name="burn" type="float" precision="2" max="9999" gui-text="burn" gui-description='burn correction in mm (bigger values for tighter fit). Use BurnTest in "Parts and Samples" to find the right value.'>0.1</param>
</page>
<page name="tab_2" gui-text="Finger Joints">
<param name="FingerJoint_angle" type="float" precision="2" max="9999" gui-text="angle" gui-description="angle">90.0</param>
<param name="FingerJoint_style" type="optiongroup" appearance="combo" gui-text="style" gui-description="style of the fingers">
<option value="rectangular">rectangular</option>
<option value="springs">springs</option>
</param>
<param name="FingerJoint_surroundingspaces" type="float" precision="2" max="9999" gui-text="surroundingspaces" gui-description="maximum space at the start and end in multiple of normal spaces">2.0</param>
<param name="FingerJoint_edge_width" type="float" precision="2" max="9999" gui-text="edge_width" gui-description="space below holes of FingerHoleEdge">1.0</param>
<param name="FingerJoint_finger" type="float" precision="2" max="9999" gui-text="finger" gui-description="width of the fingers">2.0</param>
<param name="FingerJoint_play" type="float" precision="2" max="9999" gui-text="play" gui-description="extra space to allow finger move in and out">0.0</param>
<param name="FingerJoint_space" type="float" precision="2" max="9999" gui-text="space" gui-description="space between fingers">2.0</param>
<param name="FingerJoint_width" type="float" precision="2" max="9999" gui-text="width" gui-description="width of finger holes">1.0</param>
</page>
<page name="tab_3" gui-text="Example">
<image>./DividerTray-thumb.jpg</image>
</page>
</param>
<label appearance="url">https://www.festi.info/boxes.py/DividerTray</label>
<effect>
<object-type>all</object-type>
<effects-menu>
<submenu name="FabLab Chemnitz Boxes.py">
<submenu name="Trays and Drawer Inserts"/>
</submenu>
</effects-menu>
</effect>
<script>
<command location="inx" interpreter="python">boxes_proxy.py</command>
</script>
</inkscape-extension>