mightyscape-1.2/extensions/fablabchemnitz/slic3r_stl_input/slic3r_stl_input.inx

132 lines
9.6 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<inkscape-extension xmlns="http://www.inkscape.org/namespace/inkscape/extension">
<name>Slic3r STL Input</name>
<id>fablabchemnitz.de.slic3r_stl_input</id>
<param name="tab" type="notebook">
<page name="tab_options" gui-text="Options">
<label appearance="header">Processor</label>
<param name="slic3r_cmd" type="path" mode="file" gui-text="Slic3r-1.3.1-dev command">/path/to/slic3r/v1.3.1-dev</param>
<label appearance="header">Input</label>
<param name="inputfile" type="path" gui-text="Input file (OBJ/OFF/PLY/STL)" filetypes="obj,off,ply,stl" mode="file">/your/object/file.stl</param>
<param name="max_num_faces" type="int" min="1" max="99999" gui-text="Maximum allowed faces" gui-description="If the STL file has too much detail it contains a large number of faces. This will make processing extremely slow. So we can limit it.">200</param>
<param name="layer_height" type="float" min="0.001" max="99999.000" precision="3" gui-text="Layer height [mm]">1.000</param>
<param name="layer_number" type="int" min="-99999" max="99999" gui-text="Specific layer number" gui-description="Set to 0 to import all numbers or set a number + or - to import a specific layer. Negative values will invert (count backwards)">0</param>
<hbox>
<vbox>
<label appearance="header">Transforms</label>
<param name="scalefactor" type="float" precision="3" min="0.0001" max="10000.0" gui-text="Manual scale factor" gui-description="default is 1.0">1.0</param>
<param name="rx" type="float" precision="1" min="-360.0" max="360.0" gui-text="3D-Rotate X-Axis [deg]">0.0</param>
<param name="ry" type="float" precision="1" min="-360.0" max="360.0" gui-text="3D-Rotate Y-Axis [deg]">0.0</param>
<param name="rz" type="float" precision="1" min="-360.0" max="360.0" gui-text="3D-Rotate Z-Axis [deg]">0.0</param>
<param name="mirrorx" type="bool" gui-text="Mirror X">false</param>
<param name="mirrory" type="bool" gui-text="Mirror Y">false</param>
</vbox>
<separator />
<vbox>
<label appearance="header">Output</label>
<param name="resizetoimport" type="bool" gui-text="Resize canvas" gui-description="Resize the canvas to the imported drawing's bounding box">true</param>
<param name="extraborder" type="float" precision="3" gui-text="Extra border" gui-description="Add extra border around fitted canvas">0.0</param>
<param name="extraborder_units" type="optiongroup" appearance="combo" gui-text="Border offset units">
<option value="mm">mm</option>
<option value="cm">cm</option>
<option value="in">in</option>
<option value="pt">pt</option>
<option value="px">px</option>
</param>
<param name="numbers" type="bool" gui-text="Add layer numbers">false</param>
<param name="center" type="bool" gui-text="Add center marks">false</param>
</vbox>
</hbox>
</page>
<page name="tab_style" gui-text="Style">
<hbox>
<vbox>
<label appearance="header">Fill Style</label>
<param name="use_fill_color" type="bool" gui-text="Use fill color">false</param>
<param name="fill_color" type="color" appearance="colorbutton" gui-text="Fill color">1943148287</param>
<param name="min_fill_opacity" type="float" precision="3" min="0.000" max="1.000" gui-text="Min fill opacity">0.0</param>
<param name="max_fill_opacity" type="float" precision="3" min="0.000" max="1.000" gui-text="Max fill opacity">1.0</param>
<label>Per Layer Settings</label>
<param name="diffuse_fill_opacity" type="optiongroup" appearance="combo" gui-text="Diffuse fill opacity">
<option value="no_diffuse">no diffuse (use max. opacity)</option>
<option value="front_to_back">front to back</option>
<option value="back_to_front">back to front</option>
</param>
<separator/>
<label appearance="header">Stroke Color</label>
<param name="use_stroke_color" type="bool" gui-text="Use stroke color">true</param>
<param name="stroke_color" type="color" appearance="colorbutton" gui-text="Stroke color">879076607</param>
</vbox>
<separator/>
<vbox>
<label appearance="header">Stroke Width</label>
<param name="stroke_units" type="optiongroup" appearance="combo" gui-text="Units">
<option value="mm">mm</option>
<option value="cm">cm</option>
<option value="in">in</option>
<option value="pt">pt</option>
<option value="px">px</option>
<option value="hairline">hairline</option>
</param>
<param name="min_stroke_width" type="float" precision="3" min="0.000" max="1000.000" gui-text="Min stroke width">1.0</param>
<param name="max_stroke_width" type="float" precision="3" min="0.000" max="1000.000" gui-text="Max stroke width">1.0</param>
<label>Per Layer Settings</label>
<param name="diffuse_stroke_width" type="optiongroup" appearance="combo" gui-text="Diffuse stroke width">
<option value="no_diffuse">no diffuse (use max. width)</option>
<option value="front_to_back">front to back</option>
<option value="back_to_front">back to front</option>
</param>
<label appearance="header">Stroke Opacity</label>
<param name="min_stroke_opacity" type="float" precision="3" min="0.000" max="1.000" gui-text="Min stroke opacity">0.0</param>
<param name="max_stroke_opacity" type="float" precision="3" min="0.000" max="1.000" gui-text="Max stroke opacity">1.0</param>
<label>Per Layer Settings</label>
<param name="diffuse_stroke_opacity" type="optiongroup" appearance="combo" gui-text="Diffuse stroke opacity">
<option value="no_diffuse">no diffuse (use max. opacity)</option>
<option value="front_to_back">front to back</option>
<option value="back_to_front">back to front</option>
</param>
</vbox>
</hbox>
</page>
<page name="tab_about" gui-text="About">
<label appearance="header">Slic3r STL Input</label>
<label>This extension is highly based on the work of Jürgen Weigert. It projects an STL file on the X-Y plane by cutting the objects into "slices". Each "slice" is a group of polygons, with a label indicating it's z position. The polygons are converted to paths for better editing in inkscape. Use Object -&gt; Rows &amp; Columns to distribute the slices in a grid. Possible input files are STL, Wavefront OBJ, PLY and OFF.</label>
<label>2021 / written by Mario Voigt (Stadtfabrikanten e.V. / FabLab Chemnitz)</label>
<spacer />
<label appearance="header">Online Documentation</label>
<label appearance="url">https://y.stadtfabrikanten.org/slic3rstlinput</label>
<spacer />
<label appearance="header">Contributing</label>
<label appearance="url">https://gitea.fablabchemnitz.de/FabLab_Chemnitz/mightyscape-1.X</label>
<label appearance="url">mailto:mario.voigt@stadtfabrikanten.org</label>
<spacer />
<label appearance="header">Third Party Modules</label>
<label appearance="url">https://slic3r.org/download</label>
<spacer />
<label appearance="header">MightyScape Extension Collection</label>
<label>This piece of software is part of the MightyScape for Inkscape Extension Collection and is licensed under GNU GPL v3</label>
<label appearance="url">https://y.stadtfabrikanten.org/mightyscape-overview</label>
</page>
<page name="tab_donate" gui-text="Donate">
<label appearance="header">Coffee + Pizza</label>
<label>We are the Stadtfabrikanten, running the FabLab Chemnitz since 2016. A FabLab is an open workshop that gives people access to machines and digital tools like 3D printers, laser cutters and CNC milling machines.</label>
<spacer />
<label>You like our work and want to support us? You can donate to our non-profit organization by different ways:</label>
<label appearance="url">https://y.stadtfabrikanten.org/donate</label>
<spacer />
<label>Thanks for using our extension and helping us!</label>
<image>../000_about_fablabchemnitz.svg</image>
</page>
</param>
<effect>
<object-type>all</object-type>
<effects-menu>
<submenu name="FabLab Chemnitz">
<submenu name="Import/Export/Transfer" />
</submenu>
</effects-menu>
</effect>
<script>
<command location="inx" interpreter="python">slic3r_stl_input.py</command>
</script>
</inkscape-extension>