Added MarliBraille

MarlinBraille/pins_LEAPFROG.h

@@ -0,0 +1,91 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Leapfrog Driver board pin assignments
+ */
+
+#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
+  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
+#endif
+
+#define BOARD_NAME         "Leapfrog"
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN          47
+#define X_MAX_PIN           2
+#define Y_MIN_PIN          48
+#define Y_MAX_PIN          15
+#define Z_MIN_PIN          49
+#define Z_MAX_PIN          -1
+
+//
+// Steppers
+//
+#define X_STEP_PIN         28
+#define X_DIR_PIN          63
+#define X_ENABLE_PIN       29
+
+#define Y_STEP_PIN         14 // A6
+#define Y_DIR_PIN          15 // A0
+#define Y_ENABLE_PIN       39
+
+#define Z_STEP_PIN         31 // A2
+#define Z_DIR_PIN          32 // A6
+#define Z_ENABLE_PIN       30 // A1
+
+#define E0_STEP_PIN        34 // 34
+#define E0_DIR_PIN         35 // 35
+#define E0_ENABLE_PIN      33 // 33
+
+#define E1_STEP_PIN        37 // 37
+#define E1_DIR_PIN         40 // 40
+#define E1_ENABLE_PIN      36 // 36
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         13   // Analog Input (D27)
+#define TEMP_1_PIN         15   // Analog Input (1)
+#define TEMP_BED_PIN       14   // Analog Input (1,2 or I2C)
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN        9
+#define HEATER_1_PIN        8 // 12
+#define HEATER_2_PIN       11 // 13
+#define HEATER_BED_PIN     10 // 14/15
+
+#define FAN_PIN             7
+
+//
+// Misc. Functions
+//
+#define SDSS               11
+#define LED_PIN            13
+#define SOL1_PIN           16
+#define SOL2_PIN           17
+
+/*  Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31)  */