Added MarliBraille

MarlinBraille/thermistortable_52.h

@@ -0,0 +1,60 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
+// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+// Advantage: More resolution and better linearity from 150C to 200C
+const short temptable_52[][2] PROGMEM = {
+  { OV(   1), 500 },
+  { OV( 125), 300 }, // top rating 300C
+  { OV( 142), 290 },
+  { OV( 162), 280 },
+  { OV( 185), 270 },
+  { OV( 211), 260 },
+  { OV( 240), 250 },
+  { OV( 274), 240 },
+  { OV( 312), 230 },
+  { OV( 355), 220 },
+  { OV( 401), 210 },
+  { OV( 452), 200 },
+  { OV( 506), 190 },
+  { OV( 563), 180 },
+  { OV( 620), 170 },
+  { OV( 677), 160 },
+  { OV( 732), 150 },
+  { OV( 783), 140 },
+  { OV( 830), 130 },
+  { OV( 871), 120 },
+  { OV( 906), 110 },
+  { OV( 935), 100 },
+  { OV( 958),  90 },
+  { OV( 976),  80 },
+  { OV( 990),  70 },
+  { OV(1000),  60 },
+  { OV(1008),  50 },
+  { OV(1013),  40 },
+  { OV(1017),  30 },
+  { OV(1019),  20 },
+  { OV(1021),  10 },
+  { OV(1022),   0 }
+};