Doodle3D-Slicer/src/settings/default.yml

zOffset: 0.2
dimensions:
  x: 200
  y: 200
  z: 200
heatedBed: false
nozzleDiameter: 0.4
filamentThickness: 2.85
temperature: 210
bedTemperature: 50
layerHeight: 0.15
combing: true
thickness:
  top: 0.45
  bottom: 0.45
  shell: 0.8
retraction:
  enabled: true
  amount: 3.0
  speed: 50.0
  minDistance: 0.0
travel:
  speed: 200.0
support:
  enabled: false
  acceptanceMargin: 1.5
  distanceY: 0.4
  gridSize: 6.0
  margin: 2.0
  plateSize: 4.0
  flowRate: 0.8
  speed: 40.0
innerShell:
  flowRate: 1.0
  speed: 50.0
outerShell:
  flowRate: 1.0
  speed: 40.0
innerInfill:
  flowRate: 1.0
  speed: 80.0
  gridSize: 15.0
outerInfill:
  flowRate: 1.0
  speed: 50.0
brim:
  offset: 4.0
  flowRate: 1.0
  speed: 40.0
firstLayer:
  flowRate: 1.2
  speed: 40.0
lower z offset 2018-01-15 15:27:12 +01:00			`zOffset: 0.2`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`dimensions:`
			`x: 200`
			`y: 200`
			`z: 200`
			`heatedBed: false`
			`nozzleDiameter: 0.4`
			`filamentThickness: 2.85`
use new settings #25 2017-07-27 18:33:25 +02:00			`temperature: 210`
change default bed temperature 2018-01-15 15:24:09 +01:00			`bedTemperature: 50`
use new settings #25 2017-07-27 18:33:25 +02:00			`layerHeight: 0.15`
update combing 2017-08-17 16:13:21 +02:00			`combing: true`
use new settings #25 2017-07-27 18:33:25 +02:00			`thickness:`
update settings 2017-11-16 23:24:30 +01:00			`top: 0.45`
			`bottom: 0.45`
use new settings #25 2017-07-27 18:33:25 +02:00			`shell: 0.8`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`retraction:`
			`enabled: true`
use new settings #25 2017-07-27 18:33:25 +02:00			`amount: 3.0`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`speed: 50.0`
			`minDistance: 0.0`
use new settings #25 2017-07-27 18:33:25 +02:00			`travel:`
			`speed: 200.0`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`support:`
use new settings #25 2017-07-27 18:33:25 +02:00			`enabled: false`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`acceptanceMargin: 1.5`
			`distanceY: 0.4`
			`gridSize: 6.0`
			`margin: 2.0`
			`plateSize: 4.0`
			`flowRate: 0.8`
			`speed: 40.0`
use new settings #25 2017-07-27 18:33:25 +02:00			`innerShell:`
			`flowRate: 1.0`
			`speed: 50.0`
			`outerShell:`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`flowRate: 1.0`
			`speed: 40.0`
use new settings #25 2017-07-27 18:33:25 +02:00			`innerInfill:`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`flowRate: 1.0`
combine interlines and outline into shell 2017-07-28 12:13:53 +02:00			`speed: 80.0`
update settings 2017-11-16 23:24:30 +01:00			`gridSize: 15.0`
use new settings #25 2017-07-27 18:33:25 +02:00			`outerInfill:`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`flowRate: 1.0`
			`speed: 50.0`
			`brim:`
fix settings 2017-07-28 12:17:40 +02:00			`offset: 4.0`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`flowRate: 1.0`
			`speed: 40.0`
use new settings #25 2017-07-27 18:33:25 +02:00			`firstLayer:`
replace default settings in json with split yml files 2017-07-10 16:07:38 +02:00			`flowRate: 1.2`
			`speed: 40.0`