mirror of
https://github.com/Doodle3D/Doodle3D-Slicer.git
synced 2024-12-23 11:33:49 +01:00
changed format settings
This commit is contained in:
casperlamboo
parent
090bdf248a
commit
14c5d85318
@ -1,47 +1,50 @@
|
||||
{
|
||||
"ultimaker": {
|
||||
"printer.baudrate": "115200",
|
||||
"printer.dimensions.x": 200,
|
||||
"printer.dimensions.y": 200,
|
||||
"printer.dimensions.z": 200,
|
||||
"printer.endcode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
|
||||
"printer.filamentThickness": 2.85,
|
||||
"printer.heatedbed": false,
|
||||
"printer.heatup.bed.temperature": 70,
|
||||
"printer.heatup.enabled": true,
|
||||
"printer.heatup.temperature": 180,
|
||||
"printer.nozzleDiameter": 0.4,
|
||||
"printer.startcode": ";Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
|
||||
"printer.type": "ultimaker"
|
||||
"baudrate": "115200",
|
||||
"dimensionsX": 200,
|
||||
"dimensionsY": 200,
|
||||
"dimensionsZ": 200,
|
||||
"endCode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
|
||||
"filamentThickness": 2.85,
|
||||
"heatedBed": false,
|
||||
"heatupBedTemperature": 70,
|
||||
"heatupEnabled": true,
|
||||
"heatupTemperature": 180,
|
||||
"nozzleDiameter": 0.4,
|
||||
"startCode": ";Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
|
||||
"temperature": 210.0,
|
||||
"type": "ultimaker"
|
||||
},
|
||||
"ultimaker2": {
|
||||
"printer.baudrate": "115200",
|
||||
"printer.dimensions.x": 223,
|
||||
"printer.dimensions.y": 223,
|
||||
"printer.dimensions.z": 205,
|
||||
"printer.endcode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
|
||||
"printer.filamentThickness": 2.85,
|
||||
"printer.heatedbed": true,
|
||||
"printer.heatup.bed.temperature": 70,
|
||||
"printer.heatup.enabled": true,
|
||||
"printer.heatup.temperature": 180,
|
||||
"printer.nozzleDiameter": 0.4,
|
||||
"printer.startcode": ";Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
|
||||
"printer.type": "ultimaker2"
|
||||
"baudrate": "115200",
|
||||
"dimensionsX": 223,
|
||||
"dimensionsY": 223,
|
||||
"dimensionsZ": 205,
|
||||
"endCode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
|
||||
"filamentThickness": 2.85,
|
||||
"heatedBed": true,
|
||||
"heatupBedTemperature": 70,
|
||||
"heatupEnabled": true,
|
||||
"heatupTemperature": 180,
|
||||
"nozzleDiameter": 0.4,
|
||||
"startCode": ";Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
|
||||
"temperature": 210.0,
|
||||
"type": "ultimaker2"
|
||||
},
|
||||
"ultimaker2go": {
|
||||
"printer.baudrate": "115200",
|
||||
"printer.dimensions.x": 120,
|
||||
"printer.dimensions.y": 120,
|
||||
"printer.dimensions.z": 115,
|
||||
"printer.endcode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
|
||||
"printer.filamentThickness": 2.85,
|
||||
"printer.heatedbed": false,
|
||||
"printer.heatup.bed.temperature": 70,
|
||||
"printer.heatup.enabled": true,
|
||||
"printer.heatup.temperature": 20,
|
||||
"printer.nozzleDiameter": 0.4,
|
||||
"printer.startcode": ";Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
|
||||
"printer.type": "ultimaker2g0"
|
||||
"baudrate": "115200",
|
||||
"dimensionsX": 120,
|
||||
"dimensionsY": 120,
|
||||
"dimensionsZ": 115,
|
||||
"endCode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
|
||||
"filamentThickness": 2.85,
|
||||
"heatedBed": false,
|
||||
"heatupBedTemperature": 70,
|
||||
"heatupEnabled": true,
|
||||
"heatupTemperature": 20,
|
||||
"nozzleDiameter": 0.4,
|
||||
"startCode": ";Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
|
||||
"temperature": 210.0,
|
||||
"type": "ultimaker2g0"
|
||||
}
|
||||
}
|
||||
@ -1,25 +1,43 @@
|
||||
{
|
||||
"printer.normalFlowRate": 1.0,
|
||||
"printer.bottomFlowRate": 2.0,
|
||||
"printer.bottomLayerSpeed": 35.0,
|
||||
"printer.bottomThickness": 0.4,
|
||||
"printer.fillSize": 5.0,
|
||||
"printer.firstLayerSlow": true,
|
||||
"printer.layerHeight": 0.2,
|
||||
"printer.retraction.amount": 3.0,
|
||||
"printer.retraction.enabled": true,
|
||||
"printer.retraction.speed": 50,
|
||||
"printer.retraction.minDistance": 5.0,
|
||||
"printer.shellThickness": 0.4,
|
||||
"printer.speed": 50.0,
|
||||
"printer.brimOffset": 5.0,
|
||||
"printer.temperature": 210.0,
|
||||
"printer.topThickness": 0.8,
|
||||
"printer.travelSpeed": 200.0,
|
||||
"printer.support.accaptanceMargin": 1.5,
|
||||
"printer.support.distanceY": 0.4,
|
||||
"printer.support.use": true,
|
||||
"printer.support.gritSize": 6.0,
|
||||
"printer.support.margin": 2.0,
|
||||
"printer.support.plateSize": 4.0
|
||||
"layerHeight": 0.2,
|
||||
"bottomThickness": 0.4,
|
||||
"topThickness": 0.8,
|
||||
"shellThickness": 0.4,
|
||||
"brimOffset": 5.0,
|
||||
"fillGritSize": 5.0,
|
||||
"travelSpeed": 200.0,
|
||||
"retractionAmount": 3.0,
|
||||
"retractionEnabled": true,
|
||||
"retractionSpeed": 50.0,
|
||||
"retractionMinDistance": 5.0,
|
||||
"supportAccaptanceMargin": 1.5,
|
||||
"supportDistanceY": 0.4,
|
||||
"supportUse": true,
|
||||
"supportGritSize": 6.0,
|
||||
"supportMargin": 2.0,
|
||||
"supportPlateSize": 4.0,
|
||||
"outerLine": {
|
||||
"flowRate": 1.0,
|
||||
"speed": 50.0
|
||||
},
|
||||
"innerLine": {
|
||||
"flowRate": 1.0,
|
||||
"speed": 80.0
|
||||
},
|
||||
"fill": {
|
||||
"flowRate": 1.0,
|
||||
"speed": 80.0
|
||||
},
|
||||
"brim": {
|
||||
"flowRate": 1.0,
|
||||
"speed": 50.0
|
||||
},
|
||||
"support": {
|
||||
"flowRate": 0.2,
|
||||
"speed": 100.0
|
||||
},
|
||||
"bottom": {
|
||||
"flowRate": 2.0,
|
||||
"speed": 30.0
|
||||
}
|
||||
}
|
||||
@ -37,7 +37,7 @@ function init () {
|
||||
var printer = new D3D.Printer().updateConfig(USER_SETTINGS).updateConfig(PRINTER_SETTINGS["ultimaker"]);
|
||||
|
||||
var loader = new THREE.STLLoader();
|
||||
loader.load('models/pokemon/pikachu.stl', function (geometry) {
|
||||
loader.load('models/support_test.stl', function (geometry) {
|
||||
//var geometry = new THREE.BoxGeometry(10, 10, 10, 1, 1, 1);
|
||||
//var geometry = new THREE.SphereGeometry(10, 20, 10);
|
||||
//var geometry = new THREE.TorusGeometry(20, 10, 30, 30);
|
||||
|
||||
109
src/gcode.js
109
src/gcode.js
@ -76,73 +76,70 @@ D3D.GCode.prototype.turnFanOff = function () {
|
||||
|
||||
return this;
|
||||
};
|
||||
D3D.GCode.prototype.moveTo = function (extrude, x, y, layer) {
|
||||
D3D.GCode.prototype.moveTo = function (x, y, layer) {
|
||||
"use strict";
|
||||
|
||||
var layerHeight = this.settings.config["printer.layerHeight"];
|
||||
var firstLayerSlow = this.settings.config["printer.firstLayerSlow"];
|
||||
var normalSpeed = this.settings.config["printer.speed"];
|
||||
var bottomSpeed = this.settings.config["printer.bottomLayerSpeed"];
|
||||
var normalSpeed = this.settings.config["printer.speed"];
|
||||
var bottomSpeed = this.settings.config["printer.bottomLayerSpeed"];
|
||||
var nozzleDiameter = this.settings.config["printer.nozzleDiameter"];
|
||||
var filamentThickness = this.settings.config["printer.filamentThickness"];
|
||||
var bottomFlowRate = this.settings.config["printer.bottomFlowRate"];
|
||||
var normalFlowRate = this.settings.config["printer.normalFlowRate"];
|
||||
var travelSpeed = this.settings.config["printer.travelSpeed"];
|
||||
var layerHeight = this.settings.config["layerHeight"];
|
||||
var travelSpeed = this.settings.config["travelSpeed"];
|
||||
|
||||
var z = (layer + 1) * layerHeight;
|
||||
var speed = travelSpeed * 60;
|
||||
|
||||
if (this.bottom) {
|
||||
var speed = bottomSpeed * 60;
|
||||
var flowRate = bottomFlowRate;
|
||||
}
|
||||
else {
|
||||
var speed = normalSpeed * 60;
|
||||
var flowRate = normalFlowRate;
|
||||
}
|
||||
this.addGCode({
|
||||
"G": 0,
|
||||
"X": x.toFixed(3), "Y": y.toFixed(3), "Z": z.toFixed(3),
|
||||
"F": speed.toFixed(3)
|
||||
});
|
||||
|
||||
this.nozzlePosition.set(x, y);
|
||||
|
||||
return this;
|
||||
};
|
||||
D3D.GCode.prototype.lineTo = function (x, y, layer, type) {
|
||||
"use strict";
|
||||
|
||||
var newNozzlePosition = new THREE.Vector2(x, y);
|
||||
|
||||
var layerHeight = this.settings.config["layerHeight"];
|
||||
var nozzleDiameter = this.settings.config["nozzleDiameter"];
|
||||
var filamentThickness = this.settings.config["filamentThickness"];
|
||||
var travelSpeed = this.settings.config["travelSpeed"];
|
||||
|
||||
var profile = this.settings.config[(this.bottom ? "bottom" : type)];
|
||||
|
||||
var speed = profile["speed"] * 60;
|
||||
var flowRate = profile["flowRate"];
|
||||
var z = (layer + 1) * layerHeight;
|
||||
|
||||
if (extrude) {
|
||||
var lineLength = this.nozzlePosition.distanceTo(new THREE.Vector2(x, y));
|
||||
var lineLength = this.nozzlePosition.distanceTo(newNozzlePosition);
|
||||
|
||||
var filamentSurfaceArea = Math.pow((filamentThickness/2), 2) * Math.PI;
|
||||
this.extruder += lineLength * nozzleDiameter * layerHeight / filamentSurfaceArea * flowRate;
|
||||
var filamentSurfaceArea = Math.pow((filamentThickness/2), 2) * Math.PI;
|
||||
this.extruder += lineLength * nozzleDiameter * layerHeight / filamentSurfaceArea * flowRate;
|
||||
|
||||
this.addGCode({
|
||||
"G": 1,
|
||||
"X": x.toFixed(3), "Y": y.toFixed(3), "Z": z.toFixed(3),
|
||||
"F": speed.toFixed(3),
|
||||
"E": this.extruder.toFixed(3)
|
||||
});
|
||||
}
|
||||
else {
|
||||
var speed = travelSpeed * 60;
|
||||
this.addGCode({
|
||||
"G": 1,
|
||||
"X": x.toFixed(3), "Y": y.toFixed(3), "Z": z.toFixed(3),
|
||||
"F": speed.toFixed(3),
|
||||
"E": this.extruder.toFixed(3)
|
||||
});
|
||||
|
||||
this.addGCode({
|
||||
"G": 0,
|
||||
"X": x.toFixed(3), "Y": y.toFixed(3), "Z": z.toFixed(3),
|
||||
"F": speed.toFixed(3)
|
||||
});
|
||||
|
||||
}
|
||||
|
||||
this.nozzlePosition = new THREE.Vector2(x, y);
|
||||
this.nozzlePosition.copy(newNozzlePosition);
|
||||
|
||||
return this;
|
||||
};
|
||||
D3D.GCode.prototype.unRetract = function () {
|
||||
"use strict";
|
||||
|
||||
if (this.isRetracted) {
|
||||
this.isRetracted = false;
|
||||
var retractionEnabled = this.settings.config["retractionEnabled"];
|
||||
var retractionMinDistance = this.settings.config["retractionMinDistance"];
|
||||
var retractionSpeed = this.settings.config["retractionSpeed"];
|
||||
|
||||
var retractionAmount = this.settings.config["printer.retraction.amount"];
|
||||
var retractionEnabled = this.settings.config["printer.retraction.enabled"];
|
||||
var retractionMinDistance = this.settings.config["printer.retraction.minDistance"];
|
||||
var retractionSpeed = this.settings.config["printer.retraction.speed"];
|
||||
if (this.isRetracted && retractionEnabled) {
|
||||
this.isRetracted = false;
|
||||
|
||||
var speed = retractionSpeed * 60;
|
||||
|
||||
if (this.extruder > retractionMinDistance && retractionEnabled) {
|
||||
if (this.extruder > retractionMinDistance) {
|
||||
this.addGCode({
|
||||
"G": 0,
|
||||
"E": this.extruder.toFixed(3),
|
||||
@ -156,14 +153,14 @@ D3D.GCode.prototype.unRetract = function () {
|
||||
D3D.GCode.prototype.retract = function () {
|
||||
"use strict";
|
||||
|
||||
if (!this.isRetracted) {
|
||||
var retractionAmount = this.settings.config["retractionAmount"];
|
||||
var retractionEnabled = this.settings.config["retractionEnabled"];
|
||||
var retractionMinDistance = this.settings.config["retractionMinDistance"];
|
||||
var retractionSpeed = this.settings.config["retractionSpeed"];
|
||||
|
||||
if (!this.isRetracted && retractionEnabled) {
|
||||
this.isRetracted = true;
|
||||
|
||||
var retractionAmount = this.settings.config["printer.retraction.amount"];
|
||||
var retractionEnabled = this.settings.config["printer.retraction.enabled"];
|
||||
var retractionMinDistance = this.settings.config["printer.retraction.minDistance"];
|
||||
var retractionSpeed = this.settings.config["printer.retraction.speed"];
|
||||
|
||||
|
||||
var speed = retractionSpeed * 60;
|
||||
|
||||
if (this.extruder > retractionMinDistance && retractionEnabled) {
|
||||
|
||||
@ -14,9 +14,7 @@ D3D.Printer.prototype.updateConfig = function (config) {
|
||||
"use strict";
|
||||
|
||||
for (var i in config) {
|
||||
if (i.indexOf("printer") === 0) {
|
||||
this.config[i] = config[i];
|
||||
}
|
||||
this.config[i] = config[i];
|
||||
}
|
||||
|
||||
return this;
|
||||
@ -24,7 +22,7 @@ D3D.Printer.prototype.updateConfig = function (config) {
|
||||
D3D.Printer.prototype.getStartCode = function () {
|
||||
"use strict";
|
||||
|
||||
var gcode = this.config["printer.startcode"];
|
||||
var gcode = this.config["startCode"];
|
||||
gcode = this.subsituteVariables(gcode);
|
||||
|
||||
return gcode;
|
||||
@ -32,7 +30,7 @@ D3D.Printer.prototype.getStartCode = function () {
|
||||
D3D.Printer.prototype.getEndCode = function () {
|
||||
"use strict";
|
||||
|
||||
var gcode = this.config["printer.endcode"];
|
||||
var gcode = this.config["endCode"];
|
||||
|
||||
gcode = this.subsituteVariables(gcode);
|
||||
|
||||
@ -41,12 +39,12 @@ D3D.Printer.prototype.getEndCode = function () {
|
||||
D3D.Printer.prototype.subsituteVariables = function (gcode) {
|
||||
"use strict";
|
||||
|
||||
var temperature = this.config["printer.temperature"];
|
||||
var bedTemperature = this.config["printer.bed.temperature"];
|
||||
var preheatTemperature = this.config["printer.heatup.temperature"];
|
||||
var preheatBedTemperature = this.config["printer.heatup.bed.temperature"];
|
||||
var printerType = this.config["printer.type"];
|
||||
var heatedbed = this.config["printer.heatedbed"];
|
||||
var temperature = this.config["temperature"];
|
||||
var bedTemperature = this.config["bedTemperature"];
|
||||
var preheatTemperature = this.config["heatupTemperature"];
|
||||
var preheatBedTemperature = this.config["heatupBedTemperature"];
|
||||
var printerType = this.config["type"];
|
||||
var heatedbed = this.config["heatedbed"];
|
||||
|
||||
switch (printerType) {
|
||||
case "makerbot_replicator2": printerType = "r2"; break;
|
||||
|
||||
@ -150,7 +150,6 @@ D3D.Slicer.prototype.slice = function (layerHeight, height) {
|
||||
var y = layer * layerHeight;
|
||||
|
||||
var intersections = [];
|
||||
var log = [];
|
||||
for (var i = 0; i < layerIntersections.length; i ++) {
|
||||
var index = layerIntersections[i];
|
||||
var line = this.lines[index].line;
|
||||
@ -166,7 +165,6 @@ D3D.Slicer.prototype.slice = function (layerHeight, height) {
|
||||
}
|
||||
|
||||
intersections[index] = new THREE.Vector2(z, x);
|
||||
log.push({x: z, y: x, index: index, connects: this.lines[index].connects});
|
||||
}
|
||||
|
||||
var done = [];
|
||||
@ -194,8 +192,6 @@ D3D.Slicer.prototype.slice = function (layerHeight, height) {
|
||||
|
||||
var faceNormal = faceNormals[Math.floor(j/2)];
|
||||
|
||||
console.log();
|
||||
|
||||
if (a.distanceTo(b) === 0 || faceNormal.equals(new THREE.Vector2(0, 0))) {
|
||||
connects = connects.concat(this.lines[index].connects);
|
||||
faceNormals = faceNormals.concat(this.lines[index].normals);
|
||||
@ -280,20 +276,20 @@ D3D.Slicer.prototype.slicesToData = function (slices, printer) {
|
||||
|
||||
var scale = 100;
|
||||
|
||||
var layerHeight = printer.config["printer.layerHeight"];
|
||||
var nozzleDiameter = printer.config["printer.nozzleDiameter"] * scale;
|
||||
var shellThickness = printer.config["printer.shellThickness"] * scale;
|
||||
var fillSize = printer.config["printer.fillSize"] * scale;
|
||||
var brimOffset = printer.config["printer.brimOffset"] * scale;
|
||||
var bottomThickness = printer.config["printer.bottomThickness"];
|
||||
var topThickness = printer.config["printer.topThickness"];
|
||||
var useSupport = printer.config["printer.support.use"];
|
||||
var supportGritSize = printer.config["printer.support.gritSize"] * scale;
|
||||
var supportAccaptanceMargin = printer.config["printer.support.accaptanceMargin"] * scale;
|
||||
var supportMargin = printer.config["printer.support.margin"] * scale;
|
||||
var plateSize = printer.config["printer.support.plateSize"] * scale;
|
||||
var supportDistanceY = printer.config["printer.support.distanceY"];
|
||||
var brimOffset = printer.config["printer.brimOffset"] * scale;
|
||||
var layerHeight = printer.config["layerHeight"];
|
||||
var nozzleDiameter = printer.config["nozzleDiameter"] * scale;
|
||||
var shellThickness = printer.config["shellThickness"] * scale;
|
||||
var fillGritSize = printer.config["fillGritSize"] * scale;
|
||||
var brimOffset = printer.config["brimOffset"] * scale;
|
||||
var bottomThickness = printer.config["bottomThickness"];
|
||||
var topThickness = printer.config["topThickness"];
|
||||
var useSupport = printer.config["supportUse"];
|
||||
var supportGritSize = printer.config["supportGritSize"] * scale;
|
||||
var supportAccaptanceMargin = printer.config["supportAccaptanceMargin"] * scale;
|
||||
var supportMargin = printer.config["supportMargin"] * scale;
|
||||
var plateSize = printer.config["supportPlateSize"] * scale;
|
||||
var supportDistanceY = printer.config["supportDistanceY"];
|
||||
var brimOffset = printer.config["brimOffset"] * scale;
|
||||
|
||||
var supportDistanceLayers = Math.ceil(supportDistanceY / layerHeight);
|
||||
var bottomSkinCount = Math.ceil(bottomThickness/layerHeight);
|
||||
@ -305,7 +301,7 @@ D3D.Slicer.prototype.slicesToData = function (slices, printer) {
|
||||
top: this.geometry.boundingBox.min.x * scale,
|
||||
right: this.geometry.boundingBox.max.z * scale,
|
||||
bottom: this.geometry.boundingBox.max.x * scale
|
||||
}, fillSize, true, true);
|
||||
}, fillGritSize, true, true);
|
||||
|
||||
console.log("generating outer lines and inner lines");
|
||||
for (var layer = 0; layer < slices.length; layer ++) {
|
||||
@ -487,7 +483,7 @@ D3D.Slicer.prototype.dataToGCode = function (data, printer) {
|
||||
|
||||
var gcode = new D3D.GCode().setSettings(printer);
|
||||
|
||||
function sliceToGCode (path, retract, unRetract) {
|
||||
function sliceToGCode (path, retract, unRetract, type) {
|
||||
for (var i = 0; i < path.length; i ++) {
|
||||
var shape = path[i];
|
||||
|
||||
@ -497,14 +493,14 @@ D3D.Slicer.prototype.dataToGCode = function (data, printer) {
|
||||
var point = shape[j % shape.length];
|
||||
|
||||
if (j === 0) {
|
||||
gcode.moveTo(false, point.X, point.Y, layer);
|
||||
gcode.moveTo(point.X, point.Y, layer);
|
||||
|
||||
if (unRetract) {
|
||||
gcode.unRetract();
|
||||
}
|
||||
}
|
||||
else {
|
||||
gcode.moveTo(true, point.X, point.Y, layer);
|
||||
gcode.lineTo(point.X, point.Y, layer, type);
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -523,22 +519,22 @@ D3D.Slicer.prototype.dataToGCode = function (data, printer) {
|
||||
}
|
||||
|
||||
if (slice.brim !== undefined) {
|
||||
sliceToGCode(slice.brim, true, true);
|
||||
sliceToGCode(slice.brim, true, true, "brim");
|
||||
}
|
||||
|
||||
for (var i = 0; i < slice.parts.length; i ++) {
|
||||
var part = slice.parts[i];
|
||||
|
||||
sliceToGCode(part.outerLine, false, true);
|
||||
sliceToGCode(part.outerLine, false, true, "outerLine");
|
||||
for (var j = 0; j < part.innerLines.length; j ++) {
|
||||
var innerLine = part.innerLines[j];
|
||||
sliceToGCode(innerLine, false, false);
|
||||
sliceToGCode(innerLine, false, false, "innerLine");
|
||||
}
|
||||
sliceToGCode(part.fill, true, false);
|
||||
sliceToGCode(part.fill, true, false, "fill");
|
||||
}
|
||||
|
||||
if (slice.support !== undefined) {
|
||||
sliceToGCode(slice.support, true, true);
|
||||
sliceToGCode(slice.support, true, true, "support");
|
||||
}
|
||||
|
||||
this.progress.gcodeLayer = layer;
|
||||
@ -550,8 +546,8 @@ D3D.Slicer.prototype.dataToGCode = function (data, printer) {
|
||||
D3D.Slicer.prototype.getGCode = function (printer) {
|
||||
"use strict";
|
||||
|
||||
var layerHeight = printer.config["printer.layerHeight"];
|
||||
var dimensionsZ = printer.config["printer.dimensions.z"];
|
||||
var layerHeight = printer.config["layerHeight"];
|
||||
var dimensionsZ = printer.config["dimensionsZ"];
|
||||
|
||||
this.progress.totalLayers = Math.floor(Math.min(this.geometry.boundingBox.max.y, dimensionsZ) / layerHeight);
|
||||
this.progress.sliceLayer = 0;
|
||||
|
||||
@ -91,7 +91,7 @@ function init () {
|
||||
};
|
||||
|
||||
var loader = new THREE.STLLoader();
|
||||
loader.load('models/pokemon/pikachu.stl', function (geometry) {
|
||||
loader.load('models/support_test.stl', function (geometry) {
|
||||
//var geometry = new THREE.TorusGeometry(20, 10, 30, 30).clone();
|
||||
|
||||
var material = new THREE.MeshPhongMaterial({color: 0x00ff00, wireframe: false});
|
||||
@ -99,7 +99,7 @@ function init () {
|
||||
var mesh = new THREE.Mesh(geometry, material);
|
||||
|
||||
mesh.rotation.x = -Math.PI/2;
|
||||
mesh.scale.x = mesh.scale.y = mesh.scale.z = 0.5;
|
||||
mesh.scale.x = mesh.scale.y = mesh.scale.z = 1;
|
||||
mesh.position.y = -0.1;
|
||||
mesh.position.x = 60;
|
||||
mesh.position.z = 60;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user