use new settings

#25

src/settings/default.yml

@@ -2,49 +2,49 @@ dimensions:
   x: 200
   y: 200
   z: 200
-temperature: 210
-bedTemperature: 70
-# heatBedTemperature: 20
-# heatTemperature: 20
-# heatupEnabled: true
-travelSpeed: 200.0
-layerHeight: 0.15
 heatedBed: false
 nozzleDiameter: 0.4
 filamentThickness: 2.85
+temperature: 210
+bedTemperature: 70
+layerHeight: 0.15
+brimOffset: 4.0
+thickness:
+  top: 1.2
+  bottom: 1.2
+  shell: 0.8
 retraction:
-  amount: 3.0
   enabled: true
+  amount: 3.0
   speed: 50.0
   minDistance: 0.0
+travel:
+  speed: 200.0
 support:
+  enabled: false
   acceptanceMargin: 1.5
   distanceY: 0.4
-  enabled: false
   gridSize: 6.0
   margin: 2.0
   plateSize: 4.0
   flowRate: 0.8
   speed: 40.0
-outerLine:
-  flowRate: 1.0
-  speed: 40.0
-innerLine:
+innerShell:
   flowRate: 1.0
   speed: 50.0
-fill:
+outerShell:
+  flowRate: 1.0
+  speed: 40.0
+innerInfill:
   flowRate: 1.0
   speed: 50.0
   gridSize: 5.0
+outerInfill:
+  flowRate: 1.0
+  speed: 50.0
 brim:
   flowRate: 1.0
   speed: 40.0
-  offset: 4.0
-top:
-  thickness: 1.2
-bottom:
+firstLayer:
   flowRate: 1.2
   speed: 40.0
-  thickness: 0.4
-shell:
-  thickness: 0.4

src/sliceActions/generateInfills.js

@@ -5,15 +5,16 @@ import Shape from 'clipper-js';
 export default function generateInfills(slices, settings) {
   let {
     layerHeight,
-    fill: { gridSize: fillGridSize },
-    bottom: { thickness: bottomThickness },
-    top: { thickness: topThickness },
+    innerInfill: { gridSize: infillGridSize },
+    thickness: {
+      top: topThickness,
+      bottom: bottomThickness
+    },
     nozzleDiameter
   } = settings;
 
-  fillGridSize /= PRECISION;
+  infillGridSize /= PRECISION;
   nozzleDiameter /= PRECISION;
-  infillOverlap /= PRECISION;
 
   const bottomSkinCount = Math.ceil(bottomThickness/layerHeight);
   const topSkinCount = Math.ceil(topThickness/layerHeight);
@@ -54,7 +55,7 @@ export default function generateInfills(slices, settings) {
 
         if (lowFillArea && lowFillArea.paths.length > 0) {
           const bounds = lowFillArea.shapeBounds();
-          const lowFillTemplate = getFillTemplate(bounds, fillGridSize, true, true);
+          const lowFillTemplate = getFillTemplate(bounds, infillGridSize, true, true);
 
           part.fill.join(lowFillTemplate.intersect(lowFillArea));
         }

src/sliceActions/generateInnerLines.js

@@ -12,10 +12,12 @@ export default function generateInnerLines(slices, settings) {
   let {
     layerHeight,
     nozzleDiameter,
-    shell: { thickness: shellThickness }
+    thickness: { shell: shellThickness }
   } = settings;
+
   nozzleDiameter /= PRECISION;
   shellThickness /= PRECISION;
+
   const nozzleRadius = nozzleDiameter / 2;
   const shells = Math.round(shellThickness / nozzleDiameter);
 

src/sliceActions/helpers/GCode.js

@@ -103,9 +103,9 @@ export default class {
     if (this._isRetracted && enabled) {
       this._isRetracted = false;
 
-      const speed = retractionSpeed * 60;
+      speed *= 60;
 
-      if (this._extruder > retractionMinDistance) {
+      if (this._extruder > minDistance) {
         this._addGCode({
           [MOVE]: 0,
           [EXTRUDER]: this._extruder.toFixed(3),
@@ -121,9 +121,9 @@ export default class {
     if (!this._isRetracted && enabled) {
       this._isRetracted = true;
 
-      const speed = retractionSpeed * 60;
+      speed *= 60;
 
-      if (this._extruder > retractionMinDistance) {
+      if (this._extruder > minDistance) {
         this._addGCode({
           [MOVE]: 0,
           [EXTRUDER]: (this._extruder - retractionAmount).toFixed(3),

src/sliceActions/slicesToGCode.js

@@ -1,6 +1,6 @@
 import GCode from './helpers/GCode.js';
 
-const PROFILE_TYPES = ['brim', 'outerLine', 'innerLine', 'fill', 'support'];
+const PROFILE_TYPES = ['support', 'innerShell', 'outerShell', 'innerInfill', 'outerInfill', 'brim'];
 
 export default function slicesToGCode(slices, settings) {
   const {
@@ -9,7 +9,7 @@ export default function slicesToGCode(slices, settings) {
     nozzleDiameter,
     travelSpeed,
     retraction,
-    retractionEnabled
+    travel
   } = settings;
 
   const filamentSurfaceArea = Math.pow((filamentThickness / 2), 2) * Math.PI;
@@ -19,29 +19,24 @@ export default function slicesToGCode(slices, settings) {
   const gcode = new GCode(nozzleToFilamentRatio);
 
   const defaultProfile = {
-    travelProfile: {
-      speed: travelSpeed
-    },
-    retractProfile: {
-      ...retraction,
-      enabled: retractionEnabled
-    }
+    travelProfile: travel,
+    retractionProfile: retraction
   };
 
-  let isBottom = true;
+  let isFirstLayer = true;
   for (let layer = 0; layer < slices.length; layer ++) {
     const slice = slices[layer];
     const z = layer * layerHeight + 0.2;
 
     if (layer === 1) {
       gcode.turnFanOn();
-      isBottom = false;
+      isFirstLayer = false;
     }
 
     const profiles = PROFILE_TYPES.reduce((profiles, profileType) => {
       profiles[profileType] = {
         ...defaultProfile,
-        lineProfile: isBottom ? settings.bottom : settings[profileType]
+        lineProfile: isFirstLayer ? settings.firstLayer : settings[profileType]
       }
       return profiles;
     }, {});
@@ -54,17 +49,17 @@ export default function slicesToGCode(slices, settings) {
       const part = slice.parts[i];
 
       if (part.shape.closed) {
-        pathToGCode(gcode, part.outerLine, false, true, profiles.outerLine);
+        pathToGCode(gcode, part.outerLine, false, true, profiles.outerShell);
 
         for (let i = 0; i < part.innerLines.length; i ++) {
           const innerLine = part.innerLines[i];
-          pathToGCode(gcode, innerLine, false, false, z, profiles.innerLine);
+          pathToGCode(gcode, innerLine, false, false, z, profiles.innerShell);
         }
 
-        pathToGCode(gcode, part.fill, true, false, z, profiles.fill);
+        pathToGCode(gcode, part.fill, true, false, z, profiles.outerInfill);
       } else {
         const retract = !(slice.parts.length === 1 && typeof slice.support === 'undefined');
-        pathToGCode(gcode, part.shape, retract, retract, z, profiles.outerLine);
+        pathToGCode(gcode, part.shape, retract, retract, z, profiles.outerShell);
       }
     }
 
@@ -76,7 +71,7 @@ export default function slicesToGCode(slices, settings) {
   return gcode.getGCode();
 }
 
-function pathToGCode(gcode, shape, retract, unRetract, z, { lineProfile, travelProfile, retractProfile }) {
+function pathToGCode(gcode, shape, retract, unRetract, z, { lineProfile, travelProfile, retractionProfile }) {
   const { closed } = shape;
   const paths = shape.mapToLower();
 
@@ -93,7 +88,7 @@ function pathToGCode(gcode, shape, retract, unRetract, z, { lineProfile, travelP
         gcode.moveTo(point.x, point.y, z, travelProfile);
 
         if (unRetract) {
-          gcode.unRetract(retractProfile);
+          gcode.unRetract(retractionProfile);
         }
       } else {
         gcode.lineTo(point.x, point.y, z, lineProfile);
@@ -102,6 +97,6 @@ function pathToGCode(gcode, shape, retract, unRetract, z, { lineProfile, travelP
   }
 
   if (retract) {
-    gcode.retract(retractProfile);
+    gcode.retract(retractionProfile);
   }
 }