{
	"ultimaker": {
		"printer.baudrate": "115200", 
		"printer.dimensions.x": 200, 
		"printer.dimensions.y": 200, 
		"printer.dimensions.z": 200, 
		"printer.endcode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done                 ;display message (20 characters to clear whole screen)\n", 
		"printer.filamentThickness": 2.85, 
		"printer.heatedbed": false, 
		"printer.heatup.bed.temperature": 70, 
		"printer.heatup.enabled": true, 
		"printer.heatup.temperature": 180, 
		"printer.nozzleDiameter": 0.4, 
		"printer.startcode": ";Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle...   ;display message (20 characters to clear whole screen)\n", 
		"printer.type": "ultimaker"
	}, 
	"ultimaker2": {
		"printer.baudrate": "115200", 
		"printer.dimensions.x": 223, 
		"printer.dimensions.y": 223, 
		"printer.dimensions.z": 205, 
		"printer.endcode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done                 ;display message (20 characters to clear whole screen)\n",
		"printer.filamentThickness": 2.85, 
		"printer.heatedbed": true, 
		"printer.heatup.bed.temperature": 70, 
		"printer.heatup.enabled": true, 
		"printer.heatup.temperature": 180, 
		"printer.nozzleDiameter": 0.4, 
		"printer.startcode": ";Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle...   ;display message (20 characters to clear whole screen)\n",
		"printer.type": "ultimaker2"
	}, 
	"ultimaker2go": {
		"printer.baudrate": "115200", 
		"printer.dimensions.x": 120, 
		"printer.dimensions.y": 120, 
		"printer.dimensions.z": 115, 
		"printer.endcode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done                 ;display message (20 characters to clear whole screen)\n",
		"printer.filamentThickness": 2.85, 
		"printer.heatedbed": false, 
		"printer.heatup.bed.temperature": 70, 
		"printer.heatup.enabled": true, 
		"printer.heatup.temperature": 20, 
		"printer.nozzleDiameter": 0.4, 
		"printer.startcode": ";Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle...   ;display message (20 characters to clear whole screen)\n",
		"printer.type": "ultimaker2g0"
	}
}