Doodle3D-Slicer/settings/printer_settings.json
2017-06-22 13:21:08 +02:00

50 lines
4.1 KiB
JSON

{
"ultimaker": {
"baudrate": "115200",
"dimensionsX": 200,
"dimensionsY": 200,
"dimensionsZ": 200,
"endCode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
"filamentThickness": 2.85,
"heatedBed": false,
"heatupBedTemperature": 70,
"heatupEnabled": true,
"heatupTemperature": 180,
"nozzleDiameter": 0.4,
"startCode": ";Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
"temperature": 210.0,
"type": "ultimaker"
},
"ultimaker2": {
"baudrate": "115200",
"dimensionsX": 223,
"dimensionsY": 223,
"dimensionsZ": 205,
"endCode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
"filamentThickness": 2.85,
"heatedBed": true,
"heatupBedTemperature": 70,
"heatupEnabled": true,
"heatupTemperature": 180,
"nozzleDiameter": 0.4,
"startCode": ";Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG0 X0 Y0 F{travelSpeed} ;home position is not X0 Y0\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
"temperature": 210.0,
"type": "ultimaker2"
},
"ultimaker2go": {
"baudrate": "115200",
"dimensionsX": 120,
"dimensionsY": 120,
"dimensionsZ": 115,
"endCode": "M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)\n",
"filamentThickness": 2.85,
"heatedBed": false,
"heatupBedTemperature": 70,
"heatupEnabled": true,
"heatupTemperature": 20,
"nozzleDiameter": 0.4,
"startCode": ";Generated with Doodle3D (ultimaker2go)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG0 X0 Y0 F{travelSpeed} ;home position is not X0 Y0\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n",
"temperature": 210.0,
"type": "ultimaker2g0"
}
}