#ifndef __INC_M0_CLOCKLESS_H
#define __INC_M0_CLOCKLESS_H

struct M0ClocklessData {
  uint8_t d[3];
  uint8_t e[3];
  uint8_t adj;
  uint8_t pad;
  uint32_t s[3];
};


template<int HI_OFFSET, int LO_OFFSET, int T1, int T2, int T3, EOrder RGB_ORDER, int WAIT_TIME>int
showLedData(volatile uint32_t *_port, uint32_t _bitmask, const uint8_t *_leds, uint32_t num_leds, struct M0ClocklessData *pData) {
  // Lo register variables
  register uint32_t scratch=0;
  register struct M0ClocklessData *base = pData;
  register volatile uint32_t *port = _port;
  register uint32_t d=0;
  register uint32_t counter=num_leds;
  register uint32_t bn=0;
  register uint32_t b=0;
  register uint32_t bitmask = _bitmask;

  // high register variable
  register const uint8_t *leds = _leds;
#if (FASTLED_SCALE8_FIXED == 1)
  pData->s[0]++;
  pData->s[1]++;
  pData->s[2]++;
#endif
  asm __volatile__ (
    ///////////////////////////////////////////////////////////////////////////
    //
    // asm macro definitions - used to assemble the clockless output
    //
    ".ifnotdef fl_delay_def;"
#ifdef FASTLED_ARM_M0_PLUS
    "  .set fl_is_m0p, 1;"
    "  .macro m0pad;"
    "    nop;"
    "  .endm;"
#else
    "  .set fl_is_m0p, 0;"
    "  .macro m0pad;"
    "  .endm;"
#endif
    "  .set fl_delay_def, 1;"
    "  .set fl_delay_mod, 4;"
    "  .if fl_is_m0p == 1;"
    "    .set fl_delay_mod, 3;"
    "  .endif;"
    "  .macro fl_delay dtime, reg=r0;"
    "    .if (\\dtime > 0);"
    "      .set dcycle, (\\dtime / fl_delay_mod);"
    "      .set dwork, (dcycle * fl_delay_mod);"
    "      .set drem, (\\dtime - dwork);"
    "      .rept (drem);"
    "        nop;"
    "      .endr;"
    "      .if dcycle > 0;"
    "        mov \\reg, #dcycle;"
    "        delayloop_\\@:;"
    "        sub \\reg, #1;"
    "        bne delayloop_\\@;"
    "	     .if fl_is_m0p == 0;"
    "          nop;"
    "        .endif;"
    "      .endif;"
    "    .endif;"
    "  .endm;"

    "  .macro mod_delay dtime,b1,b2,reg;"
    "    .set adj, (\\b1 + \\b2);"
    "    .if adj < \\dtime;"
    "      .set dtime2, (\\dtime - adj);"
    "      fl_delay dtime2, \\reg;"
    "    .endif;"
    "  .endm;"

    // check the bit and drop the line low if it isn't set
    "  .macro qlo4 b,bitmask,port,loff	;"
    "    lsl \\b, #1			;"
    "    bcs skip_\\@			;"
    "    str \\bitmask, [\\port, \\loff]	;"
    "    skip_\\@:			;"
    "    m0pad;"
    "  .endm				;"

    // set the pin hi or low (determined by the offset passed in )
    "  .macro qset2 bitmask,port,loff;"
    "    str \\bitmask, [\\port, \\loff];"
    "    m0pad;"
    "  .endm;"

    // Load up the next led byte to work with, put it in bn
    "  .macro loadleds3 leds, bn, rled, scratch;"
    "    mov \\scratch, \\leds;"
    "    ldrb \\bn, [\\scratch, \\rled];"
    "  .endm;"

    // check whether or not we should dither
    "  .macro loaddither7 bn,d,base,rdither;"
    "    ldrb \\d, [\\base, \\rdither];"
    "    lsl \\d, #24;"  //; shift high for the qadd w/bn
    "    lsl \\bn, #24;" //; shift high for the qadd w/d
    "    bne chkskip_\\@;" //; if bn==0, clear d;"
    "    eor \\d, \\d;" //; clear d;"
    "    m0pad;"
    "    chkskip_\\@:;"
    "  .endm;"

    // Do the qadd8 for dithering -- there's two versions of this.  The m0 version
    // takes advantage of the 3 cycle branch to do two things after the branch,
    // while keeping timing constant.  The m0+, however, branches in 2 cycles, so
    // we have to work around that a bit more.  This is one of the few times
    // where the m0 will actually be _more_ efficient than the m0+
    "  .macro dither5 bn,d;"
    "  .syntax unified;"
    "    .if fl_is_m0p == 0;"
    "      adds \\bn, \\d;"         // do the add
    "      bcc dither5_1_\\@;"
    "      mvns \\bn, \\bn;"        // set the low 24bits ot 1's
    "      lsls \\bn, \\bn, #24;"   // move low 8 bits to the high bits
    "      dither5_1_\\@:;"
    "      nop;"                    // nop to keep timing in line
    "    .else;"
    "      adds \\bn, \\d;"         // do the add"
    "      bcc dither5_2_\\@;"
    "      mvns \\bn, \\bn;"        // set the low 24bits ot 1's
    "      dither5_2_\\@:;"
    "      bcc dither5_3_\\@;"
    "      lsls \\bn, \\bn, #24;"   // move low 8 bits to the high bits
    "      dither5_3_\\@:;"
    "    .endif;"
    "  .syntax divided;"
    "  .endm;"

    // Do our scaling
    "  .macro scale4 bn, base, scale, scratch;"
    "    ldr \\scratch, [\\base, \\scale];"
    "    lsr \\bn, \\bn, #24;"                  // bring bn back down to its low 8 bits
    "    mul \\bn, \\scratch;"                  // do the multiply
    "  .endm;"

    // swap bn into b
    "  .macro swapbbn1 b,bn;"
    "    lsl \\b, \\bn, #16;"  // put the 8 bits we want for output high
    "  .endm;"

    // adjust the dithering value for the next time around (load e from memory
    // to do the math)
    "  .macro adjdither7 base,d,rled,eoffset,scratch;"
    "    ldrb \\d, [\\base, \\rled];"
    "    ldrb \\scratch,[\\base,\\eoffset];"          // load e
    "    .syntax unified;"
    "    subs \\d, \\scratch, \\d;"                   // d=e-d
    "    .syntax divided;"
    "    strb \\d, [\\base, \\rled];"                 // save d
    "  .endm;"

    // increment the led pointer (base+6 has what we're incrementing by)
    "  .macro incleds3   leds, base, scratch;"
    "    ldrb \\scratch, [\\base, #6];"               // load incremen
    "    add \\leds, \\leds, \\scratch;"              // update leds pointer
    "  .endm;"

    // compare and loop
    "  .macro cmploop5 counter,label;"
    "    .syntax unified;"
    "    subs \\counter, #1;"
    "    .syntax divided;"
    "    beq done_\\@;"
    "    m0pad;"
    "    b \\label;"
    "    done_\\@:;"
    "  .endm;"

    " .endif;"
  );

#define M0_ASM_ARGS     :             \
      [leds] "+h" (leds),             \
      [counter] "+l" (counter),       \
      [scratch] "+l" (scratch),       \
      [d] "+l" (d),                   \
      [bn] "+l" (bn),                 \
      [b] "+l" (b)                    \
    :                                 \
      [port] "l" (port),              \
      [base] "l" (base),              \
      [bitmask] "l" (bitmask),        \
      [hi_off] "I" (HI_OFFSET),       \
      [lo_off] "I" (LO_OFFSET),       \
      [led0] "I" (RO(0)),             \
      [led1] "I" (RO(1)),             \
      [led2] "I" (RO(2)),             \
      [e0] "I" (3+RO(0)),             \
      [e1] "I" (3+RO(1)),             \
      [e2] "I" (3+RO(2)),             \
      [scale0] "I" (4*(2+RO(0))),         \
      [scale1] "I" (4*(2+RO(1))),         \
      [scale2] "I" (4*(2+RO(2))),         \
      [T1] "I" (T1),                  \
      [T2] "I" (T2),                  \
      [T3] "I" (T3)                   \
    :

    /////////////////////////////////////////////////////////////////////////
    // now for some convinience macros to make building our lines a bit cleaner
#define LOOP            "  loop_%=:"
#define HI2             "  qset2 %[bitmask], %[port], %[hi_off];"
#define _D1             "  mod_delay %c[T1],2,0,%[scratch];"
#define QLO4            "  qlo4 %[b],%[bitmask],%[port], %[lo_off];"
#define LOADLEDS3(X)    "  loadleds3 %[leds], %[bn], %[led" #X "] ,%[scratch];"
#define _D2(ADJ)        "  mod_delay %c[T2],4," #ADJ ",%[scratch];"
#define LO2             "  qset2 %[bitmask], %[port], %[lo_off];"
#define _D3(ADJ)        "  mod_delay %c[T3],2," #ADJ ",%[scratch];"
#define LOADDITHER7(X)  "  loaddither7 %[bn], %[d], %[base], %[led" #X "];"
#define DITHER5         "  dither5 %[bn], %[d];"
#define SCALE4(X)       "  scale4 %[bn], %[base], %[scale" #X "], %[scratch];"
#define SWAPBBN1        "  swapbbn1 %[b], %[bn];"
#define ADJDITHER7(X)   "  adjdither7 %[base],%[d],%[led" #X "],%[e" #X "],%[scratch];"
#define INCLEDS3        "  incleds3 %[leds],%[base],%[scratch];"
#define CMPLOOP5        "  cmploop5 %[counter], loop_%=;"
#define NOTHING         ""

#if !(defined(SEI_CHK) && (FASTLED_ALLOW_INTERRUPTS == 1))
    // We're not allowing interrupts - run the entire loop in asm to keep things
    // as tight as possible.  In an ideal world, we should be pushing out ws281x
    // leds (or other 3-wire leds) with zero gaps between pixels.
    asm __volatile__ (
      // pre-load byte 0
    LOADLEDS3(0) LOADDITHER7(0) DITHER5 SCALE4(0) ADJDITHER7(0) SWAPBBN1

    // loop over writing out the data
    LOOP
      // Write out byte 0, prepping byte 1
      HI2 _D1 QLO4 NOTHING         _D2(0) LO2 _D3(0)
      HI2 _D1 QLO4 LOADLEDS3(1)    _D2(3) LO2 _D3(0)
      HI2 _D1 QLO4 LOADDITHER7(1)  _D2(7) LO2 _D3(0)
      HI2 _D1 QLO4 DITHER5         _D2(5) LO2 _D3(0)
      HI2 _D1 QLO4 SCALE4(1)       _D2(4) LO2 _D3(0)
      HI2 _D1 QLO4 ADJDITHER7(1)   _D2(7) LO2 _D3(0)
      HI2 _D1 QLO4 NOTHING         _D2(0) LO2 _D3(0)
      HI2 _D1 QLO4 SWAPBBN1        _D2(1) LO2 _D3(0)

      // Write out byte 1, prepping byte 2
      HI2 _D1 QLO4 NOTHING         _D2(0) LO2 _D3(0)
      HI2 _D1 QLO4 LOADLEDS3(2)    _D2(3) LO2 _D3(0)
      HI2 _D1 QLO4 LOADDITHER7(2)  _D2(7) LO2 _D3(0)
      HI2 _D1 QLO4 DITHER5         _D2(5) LO2 _D3(0)
      HI2 _D1 QLO4 SCALE4(2)       _D2(4) LO2 _D3(0)
      HI2 _D1 QLO4 ADJDITHER7(2)   _D2(7) LO2 _D3(0)
      HI2 _D1 QLO4 INCLEDS3        _D2(3) LO2 _D3(0)
      HI2 _D1 QLO4 SWAPBBN1        _D2(1) LO2 _D3(0)

      // Write out byte 2, prepping byte 0
      HI2 _D1 QLO4 NOTHING         _D2(0) LO2 _D3(0)
      HI2 _D1 QLO4 LOADLEDS3(0)    _D2(3) LO2 _D3(0)
      HI2 _D1 QLO4 LOADDITHER7(0)  _D2(7) LO2 _D3(0)
      HI2 _D1 QLO4 DITHER5         _D2(5) LO2 _D3(0)
      HI2 _D1 QLO4 SCALE4(0)       _D2(4) LO2 _D3(0)
      HI2 _D1 QLO4 ADJDITHER7(0)   _D2(7) LO2 _D3(0)
      HI2 _D1 QLO4 NOTHING         _D2(0) LO2 _D3(0)
      HI2 _D1 QLO4 SWAPBBN1        _D2(1) LO2 _D3(5) CMPLOOP5

      M0_ASM_ARGS
    );
#else
    // We're allowing interrupts - track the loop outside the asm code, to allow
    // inserting the interrupt overrun checks.
    asm __volatile__ (
      // pre-load byte 0
      LOADLEDS3(0) LOADDITHER7(0) DITHER5 SCALE4(0) ADJDITHER7(0) SWAPBBN1
      M0_ASM_ARGS);

    do {
      asm __volatile__ (
      // Write out byte 0, prepping byte 1
      HI2 D1 QLO4 NOTHING         D2(0) LO2 D3(0)
      HI2 D1 QLO4 LOADLEDS3(1)    D2(3) LO2 D3(0)
      HI2 D1 QLO4 LOADDITHER7(1)  D2(7) LO2 D3(0)
      HI2 D1 QLO4 DITHER5         D2(5) LO2 D3(0)
      HI2 D1 QLO4 SCALE4(1)       D2(4) LO2 D3(0)
      HI2 D1 QLO4 ADJDITHER7(1)   D2(7) LO2 D3(0)
      HI2 D1 QLO4 NOTHING         D2(0) LO2 D3(0)
      HI2 D1 QLO4 SWAPBBN1        D2(1) LO2 D3(0)

      // Write out byte 1, prepping byte 2
      HI2 D1 QLO4 NOTHING         D2(0) LO2 D3(0)
      HI2 D1 QLO4 LOADLEDS3(2)    D2(3) LO2 D3(0)
      HI2 D1 QLO4 LOADDITHER7(2)  D2(7) LO2 D3(0)
      HI2 D1 QLO4 DITHER5         D2(5) LO2 D3(0)
      HI2 D1 QLO4 SCALE4(2)       D2(4) LO2 D3(0)
      HI2 D1 QLO4 ADJDITHER7(2)   D2(7) LO2 D3(0)
      HI2 D1 QLO4 NOTHING         D2(0) LO2 D3(0)
      HI2 D1 QLO4 SWAPBBN1        D2(1) LO2 D3(0)

      // Write out byte 2, prepping byte 0
      HI2 D1 QLO4 INCLEDS3        D2(3) LO2 D3(0)
      HI2 D1 QLO4 LOADLEDS3(0)    D2(3) LO2 D3(0)
      HI2 D1 QLO4 LOADDITHER7(0)  D2(7) LO2 D3(0)
      HI2 D1 QLO4 DITHER5         D2(5) LO2 D3(0)
      HI2 D1 QLO4 SCALE4(0)       D2(4) LO2 D3(0)
      HI2 D1 QLO4 ADJDITHER7(0)   D2(7) LO2 D3(0)
      HI2 D1 QLO4 NOTHING         D2(0) LO2 D3(0)
      HI2 D1 QLO4 SWAPBBN1        D2(1) LO2 D3(5)

      M0_ASM_ARGS
      );
      SEI_CHK; INNER_SEI; --counter; CLI_CHK;
    } while(counter);
#endif
    return num_leds;
}

#endif