54 lines
1.4 KiB
C++
54 lines
1.4 KiB
C++
#include <FastLED.h>
|
|
|
|
// How many leds in your strip?
|
|
#define NUM_LEDS 64
|
|
|
|
// For led chips like Neopixels, which have a data line, ground, and power, you just
|
|
// need to define DATA_PIN. For led chipsets that are SPI based (four wires - data, clock,
|
|
// ground, and power), like the LPD8806, define both DATA_PIN and CLOCK_PIN
|
|
#define DATA_PIN 7
|
|
#define CLOCK_PIN 13
|
|
|
|
// Define the array of leds
|
|
CRGB leds[NUM_LEDS];
|
|
|
|
void setup() {
|
|
Serial.begin(57600);
|
|
Serial.println("resetting");
|
|
LEDS.addLeds<WS2812,DATA_PIN,RGB>(leds,NUM_LEDS);
|
|
LEDS.setBrightness(84);
|
|
}
|
|
|
|
void fadeall() { for(int i = 0; i < NUM_LEDS; i++) { leds[i].nscale8(250); } }
|
|
|
|
void loop() {
|
|
static uint8_t hue = 0;
|
|
Serial.print("x");
|
|
// First slide the led in one direction
|
|
for(int i = 0; i < NUM_LEDS; i++) {
|
|
// Set the i'th led to red
|
|
leds[i] = CHSV(hue++, 255, 255);
|
|
// Show the leds
|
|
FastLED.show();
|
|
// now that we've shown the leds, reset the i'th led to black
|
|
// leds[i] = CRGB::Black;
|
|
fadeall();
|
|
// Wait a little bit before we loop around and do it again
|
|
delay(10);
|
|
}
|
|
Serial.print("x");
|
|
|
|
// Now go in the other direction.
|
|
for(int i = (NUM_LEDS)-1; i >= 0; i--) {
|
|
// Set the i'th led to red
|
|
leds[i] = CHSV(hue++, 255, 255);
|
|
// Show the leds
|
|
FastLED.show();
|
|
// now that we've shown the leds, reset the i'th led to black
|
|
// leds[i] = CRGB::Black;
|
|
fadeall();
|
|
// Wait a little bit before we loop around and do it again
|
|
delay(10);
|
|
}
|
|
}
|