Mister-Green/Repetier-Firmware 1.0.3/Repetier/Eeprom.h

597 lines
18 KiB
C
Raw Normal View History

/*
This file is part of Repetier-Firmware.
Repetier-Firmware is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Repetier-Firmware is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _EEPROM_H
#define _EEPROM_H
// Id to distinguish version changes
#define EEPROM_PROTOCOL_VERSION 19
/** Where to start with our data block in memory. Can be moved if you
have problems with other modules using the eeprom */
#define EPR_MAGIC_BYTE 0
#define EPR_ACCELERATION_TYPE 1
#define EPR_XAXIS_STEPS_PER_MM 3
#define EPR_YAXIS_STEPS_PER_MM 7
#define EPR_ZAXIS_STEPS_PER_MM 11
#define EPR_X_MAX_FEEDRATE 15
#define EPR_Y_MAX_FEEDRATE 19
#define EPR_Z_MAX_FEEDRATE 23
#define EPR_X_HOMING_FEEDRATE 27
#define EPR_Y_HOMING_FEEDRATE 31
#define EPR_Z_HOMING_FEEDRATE 35
#define EPR_MAX_JERK 39
//#define EPR_OPS_MIN_DISTANCE 43
#define EPR_MAX_ZJERK 47
#define EPR_X_MAX_ACCEL 51
#define EPR_Y_MAX_ACCEL 55
#define EPR_Z_MAX_ACCEL 59
#define EPR_X_MAX_TRAVEL_ACCEL 63
#define EPR_Y_MAX_TRAVEL_ACCEL 67
#define EPR_Z_MAX_TRAVEL_ACCEL 71
#define EPR_BAUDRATE 75
#define EPR_MAX_INACTIVE_TIME 79
#define EPR_STEPPER_INACTIVE_TIME 83
//#define EPR_OPS_RETRACT_DISTANCE 87
//#define EPR_OPS_RETRACT_BACKLASH 91
#define EPR_EXTRUDER_SPEED 95
//#define EPR_OPS_MOVE_AFTER 99
//#define EPR_OPS_MODE 103
#define EPR_INTEGRITY_BYTE 104 // Here the xored sum over eeprom is stored
#define EPR_VERSION 105 // Version id for updates in EEPROM storage
#define EPR_BED_HEAT_MANAGER 106
#define EPR_BED_DRIVE_MAX 107
#define EPR_BED_PID_PGAIN 108
#define EPR_BED_PID_IGAIN 112
#define EPR_BED_PID_DGAIN 116
#define EPR_BED_PID_MAX 120
#define EPR_BED_DRIVE_MIN 124
#define EPR_PRINTING_TIME 125 // Time in seconds printing
#define EPR_PRINTING_DISTANCE 129 // Filament length printed
#define EPR_X_HOME_OFFSET 133
#define EPR_Y_HOME_OFFSET 137
#define EPR_Z_HOME_OFFSET 141
#define EPR_X_LENGTH 145
#define EPR_Y_LENGTH 149
#define EPR_Z_LENGTH 153
#define EPR_BACKLASH_X 157
#define EPR_BACKLASH_Y 161
#define EPR_BACKLASH_Z 165
#define EPR_Z_PROBE_X_OFFSET 800
#define EPR_Z_PROBE_Y_OFFSET 804
#define EPR_Z_PROBE_HEIGHT 808
#define EPR_Z_PROBE_SPEED 812
#define EPR_Z_PROBE_X1 816
#define EPR_Z_PROBE_Y1 820
#define EPR_Z_PROBE_X2 824
#define EPR_Z_PROBE_Y2 828
#define EPR_Z_PROBE_X3 832
#define EPR_Z_PROBE_Y3 836
#define EPR_Z_PROBE_XY_SPEED 840
#define EPR_AUTOLEVEL_MATRIX 844
#define EPR_AUTOLEVEL_ACTIVE 880
#define EPR_DELTA_DIAGONAL_ROD_LENGTH 881
#define EPR_DELTA_HORIZONTAL_RADIUS 885
#define EPR_DELTA_SEGMENTS_PER_SECOND_PRINT 889
#define EPR_DELTA_SEGMENTS_PER_SECOND_MOVE 891
#define EPR_DELTA_TOWERX_OFFSET_STEPS 893
#define EPR_DELTA_TOWERY_OFFSET_STEPS 895
#define EPR_DELTA_TOWERZ_OFFSET_STEPS 897
#define EPR_DELTA_ALPHA_A 901
#define EPR_DELTA_ALPHA_B 905
#define EPR_DELTA_ALPHA_C 909
#define EPR_DELTA_RADIUS_CORR_A 913
#define EPR_DELTA_RADIUS_CORR_B 917
#define EPR_DELTA_RADIUS_CORR_C 921
#define EPR_DELTA_MAX_RADIUS 925
#define EPR_Z_PROBE_BED_DISTANCE 929
#define EPR_DELTA_DIAGONAL_CORRECTION_A 933
#define EPR_DELTA_DIAGONAL_CORRECTION_B 937
#define EPR_DELTA_DIAGONAL_CORRECTION_C 941
#define EPR_TOUCHSCREEN 946 // - 975 = 30 byte for touchscreen calibration data
// Axis compensation
#define EPR_AXISCOMP_TANXY 976
#define EPR_AXISCOMP_TANYZ 980
#define EPR_AXISCOMP_TANXZ 984
#define EPR_DISTORTION_CORRECTION_ENABLED 988
#define EPR_RETRACTION_LENGTH 992
#define EPR_RETRACTION_LONG_LENGTH 996
#define EPR_RETRACTION_SPEED 1000
#define EPR_RETRACTION_Z_LIFT 1004
#define EPR_RETRACTION_UNDO_EXTRA_LENGTH 1008
#define EPR_RETRACTION_UNDO_EXTRA_LONG_LENGTH 1012
#define EPR_RETRACTION_UNDO_SPEED 1016
#define EPR_AUTORETRACT_ENABLED 1020
#define EPR_Z_PROBE_Z_OFFSET 1024
#define EPR_SELECTED_LANGUAGE 1028
#define EPR_ACCELERATION_FACTOR_TOP 1032
#define EPR_BENDING_CORRECTION_A 1036
#define EPR_BENDING_CORRECTION_B 1040
#define EPR_BENDING_CORRECTION_C 1044
#define EPR_BED_PREHEAT_TEMP 1048
#define EPR_X2AXIS_STEPS_PER_MM 1052
#define EPR_PARK_X 1056
#define EPR_PARK_Y 1060
#define EPR_PARK_Z 1064
#if EEPROM_MODE != 0
#define EEPROM_FLOAT(x) HAL::eprGetFloat(EPR_##x)
#define EEPROM_INT32(x) HAL::eprGetInt32(EPR_##x)
#define EEPROM_BYTE(x) HAL::eprGetByte(EPR_##x)
#define EEPROM_SET_BYTE(x,val) HAL::eprSetByte(EPR_##x,val)
#else
#define EEPROM_FLOAT(x) (float)(x)
#define EEPROM_INT32(x) (int32_t)(x)
#define EEPROM_BYTE(x) (uint8_t)(x)
#define EEPROM_SET_BYTE(x,val)
#endif
#define EEPROM_EXTRUDER_OFFSET 200
// bytes per extruder needed, leave some space for future development
#define EEPROM_EXTRUDER_LENGTH 100
// Extruder positions relative to extruder start
#define EPR_EXTRUDER_STEPS_PER_MM 0
#define EPR_EXTRUDER_MAX_FEEDRATE 4
// Feedrate from halted extruder in mm/s
#define EPR_EXTRUDER_MAX_START_FEEDRATE 8
// Acceleration in mm/s^2
#define EPR_EXTRUDER_MAX_ACCELERATION 12
#define EPR_EXTRUDER_HEAT_MANAGER 16
#define EPR_EXTRUDER_DRIVE_MAX 17
#define EPR_EXTRUDER_PID_PGAIN 18
#define EPR_EXTRUDER_PID_IGAIN 22
#define EPR_EXTRUDER_PID_DGAIN 26
#define EPR_EXTRUDER_DEADTIME EPR_EXTRUDER_PID_PGAIN
#define EPR_EXTRUDER_PID_MAX 30
#define EPR_EXTRUDER_X_OFFSET 31
#define EPR_EXTRUDER_Y_OFFSET 35
#define EPR_EXTRUDER_WATCH_PERIOD 39
#define EPR_EXTRUDER_ADVANCE_K 41
#define EPR_EXTRUDER_DRIVE_MIN 45
#define EPR_EXTRUDER_ADVANCE_L 46
#define EPR_EXTRUDER_WAIT_RETRACT_TEMP 50
#define EPR_EXTRUDER_WAIT_RETRACT_UNITS 52
#define EPR_EXTRUDER_COOLER_SPEED 54
// 55-57 free for byte sized parameter
#define EPR_EXTRUDER_MIXING_RATIOS 58 // 16*2 byte ratios = 32 byte -> end = 89
#define EPR_EXTRUDER_Z_OFFSET 90
#define EPR_EXTRUDER_PREHEAT 94 // maybe better temperature
#ifndef Z_PROBE_BED_DISTANCE
#define Z_PROBE_BED_DISTANCE 5.0
#endif
class EEPROM
{
#if EEPROM_MODE != 0
static void writeExtruderPrefix(uint pos);
static void writeFloat(uint pos,PGM_P text,uint8_t digits = 3);
static void writeLong(uint pos,PGM_P text);
static void writeInt(uint pos,PGM_P text);
static void writeByte(uint pos,PGM_P text);
public:
static uint8_t computeChecksum();
static void updateChecksum();
#endif
public:
static void init();
static void initBaudrate();
static void storeDataIntoEEPROM(uint8_t corrupted = 0);
static void readDataFromEEPROM(bool includeExtruder);
static void restoreEEPROMSettingsFromConfiguration();
static void writeSettings();
static void update(GCode *com);
static void updatePrinterUsage();
static inline void setVersion(uint8_t v) {
#if EEPROM_MODE != 0
HAL::eprSetByte(EPR_VERSION,v);
HAL::eprSetByte(EPR_INTEGRITY_BYTE,computeChecksum());
#endif
}
static inline uint8_t getStoredLanguage() {
#if EEPROM_MODE != 0
return HAL::eprGetByte(EPR_SELECTED_LANGUAGE);
#else
return 0;
#endif
}
#if FEATURE_Z_PROBE
static inline void setZProbeHeight(float mm) {
#if EEPROM_MODE != 0
HAL::eprSetFloat(EPR_Z_PROBE_HEIGHT, mm);
Com::printFLN(PSTR("Z-Probe height set to: "),mm,3);
EEPROM::updateChecksum();
#endif
}
#endif
static inline float zProbeZOffset() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_Z_OFFSET);
#else
return Z_PROBE_Z_OFFSET;
#endif
}
static inline float zProbeSpeed() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_SPEED);
#else
return Z_PROBE_SPEED;
#endif
}
static inline float zProbeXYSpeed() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_XY_SPEED);
#else
return Z_PROBE_XY_SPEED;
#endif
}
static inline float zProbeXOffset() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_X_OFFSET);
#else
return Z_PROBE_X_OFFSET;
#endif
}
static inline float zProbeYOffset() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_Y_OFFSET);
#else
return Z_PROBE_Y_OFFSET;
#endif
}
static inline float zProbeHeight() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_HEIGHT);
#else
return Z_PROBE_HEIGHT;
#endif
}
static inline float zProbeX1() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_X1);
#else
return Z_PROBE_X1;
#endif
}
static inline float zProbeY1() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_Y1);
#else
return Z_PROBE_Y1;
#endif
}
static inline float zProbeX2() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_X2);
#else
return Z_PROBE_X2;
#endif
}
static inline float zProbeY2() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_Y2);
#else
return Z_PROBE_Y2;
#endif
}
static inline float zProbeX3() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_X3);
#else
return Z_PROBE_X3;
#endif
}
static inline float zProbeY3() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_Y3);
#else
return Z_PROBE_Y3;
#endif
}
static inline float zProbeBedDistance() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_Z_PROBE_BED_DISTANCE);
#else
return Z_PROBE_BED_DISTANCE;
#endif
}
static inline float axisCompTanXY() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_AXISCOMP_TANXY);
#else
return AXISCOMP_TANXY;
#endif
}
static inline float axisCompTanYZ() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_AXISCOMP_TANYZ);
#else
return AXISCOMP_TANYZ;
#endif
}
static inline float axisCompTanXZ() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_AXISCOMP_TANXZ);
#else
return AXISCOMP_TANXZ;
#endif
}
#if NONLINEAR_SYSTEM
static inline int16_t deltaSegmentsPerSecondMove() {
#if EEPROM_MODE != 0
return HAL::eprGetInt16(EPR_DELTA_SEGMENTS_PER_SECOND_MOVE);
#else
return DELTA_SEGMENTS_PER_SECOND_MOVE;
#endif
}
static inline float deltaDiagonalRodLength() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_DIAGONAL_ROD_LENGTH);
#else
return DELTA_DIAGONAL_ROD;
#endif
}
static inline int16_t deltaSegmentsPerSecondPrint() {
#if EEPROM_MODE != 0
return HAL::eprGetInt16(EPR_DELTA_SEGMENTS_PER_SECOND_PRINT);
#else
return DELTA_SEGMENTS_PER_SECOND_PRINT;
#endif
}
#endif
#if DRIVE_SYSTEM == DELTA
static inline float deltaHorizontalRadius() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_HORIZONTAL_RADIUS);
#else
return ROD_RADIUS;
#endif
}
static inline int16_t deltaTowerXOffsetSteps() {
#if EEPROM_MODE != 0
return HAL::eprGetInt16(EPR_DELTA_TOWERX_OFFSET_STEPS);
#else
return DELTA_X_ENDSTOP_OFFSET_STEPS;
#endif
}
static inline int16_t deltaTowerYOffsetSteps() {
#if EEPROM_MODE != 0
return HAL::eprGetInt16(EPR_DELTA_TOWERY_OFFSET_STEPS);
#else
return DELTA_Y_ENDSTOP_OFFSET_STEPS;
#endif
}
static inline int16_t deltaTowerZOffsetSteps() {
#if EEPROM_MODE != 0
return HAL::eprGetInt16(EPR_DELTA_TOWERZ_OFFSET_STEPS);
#else
return DELTA_Z_ENDSTOP_OFFSET_STEPS;
#endif
}
static inline void setRodRadius(float mm) {
#if DRIVE_SYSTEM == DELTA
Printer::radius0=mm;
Printer::updateDerivedParameter();
#if EEPROM_MODE != 0
//This is an odd situation, the radius can only be changed if eeprom is on.
// The radius is not saved to printer variable now, it is all derived parameters of
// fetching the radius, which if EEProm is off returns the Configuration constant.
HAL::eprSetFloat(EPR_DELTA_HORIZONTAL_RADIUS, mm);
EEPROM::updateChecksum();
#endif
#endif
}
static inline void incrementRodRadius(float mm) {
setRodRadius(mm + deltaHorizontalRadius());
}
static inline void setTowerXFloor(float newZ) {
#if DRIVE_SYSTEM == DELTA
Printer::xMin = newZ;
Printer::updateDerivedParameter();
Com::printFLN(PSTR("X (A) tower floor set to: "),Printer::xMin,3);
#if EEPROM_MODE != 0
HAL::eprSetFloat(EPR_X_HOME_OFFSET,Printer::xMin);
EEPROM::updateChecksum();
#endif
#endif
}
static inline void setTowerYFloor(float newZ) {
#if DRIVE_SYSTEM == DELTA
Printer::yMin = newZ;
Printer::updateDerivedParameter();
Com::printFLN(PSTR("Y (B) tower floor set to: "), Printer::yMin, 3);
#if EEPROM_MODE != 0
HAL::eprSetFloat(EPR_Y_HOME_OFFSET,Printer::yMin);
EEPROM::updateChecksum();
#endif
#endif
}
static inline void setTowerZFloor(float newZ) {
#if DRIVE_SYSTEM == DELTA
Printer::zMin = newZ;
Printer::updateDerivedParameter();
Com::printFLN(PSTR("Z (C) tower floor set to: "), Printer::zMin, 3);
#if EEPROM_MODE != 0
HAL::eprSetFloat(EPR_Z_HOME_OFFSET,Printer::zMin);
EEPROM::updateChecksum();
#endif
#endif
}
static inline void setDeltaTowerXOffsetSteps(int16_t steps) {
#if EEPROM_MODE != 0
HAL::eprSetInt16(EPR_DELTA_TOWERX_OFFSET_STEPS,steps);
EEPROM::updateChecksum();
#endif
}
static inline void setDeltaTowerYOffsetSteps(int16_t steps) {
#if EEPROM_MODE != 0
HAL::eprSetInt16(EPR_DELTA_TOWERY_OFFSET_STEPS,steps);
EEPROM::updateChecksum();
#endif
}
static inline void setDeltaTowerZOffsetSteps(int16_t steps) {
#if EEPROM_MODE != 0
HAL::eprSetInt16(EPR_DELTA_TOWERZ_OFFSET_STEPS,steps);
EEPROM::updateChecksum();
#endif
}
static inline float deltaAlphaA() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_ALPHA_A);
#else
return DELTA_ALPHA_A;
#endif
}
static inline float deltaAlphaB() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_ALPHA_B);
#else
return DELTA_ALPHA_B;
#endif
}
static inline float deltaAlphaC() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_ALPHA_C);
#else
return DELTA_ALPHA_C;
#endif
}
static inline float deltaRadiusCorrectionA() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_RADIUS_CORR_A);
#else
return DELTA_RADIUS_CORRECTION_A;
#endif
}
static inline float deltaRadiusCorrectionB() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_RADIUS_CORR_B);
#else
return DELTA_RADIUS_CORRECTION_B;
#endif
}
static inline float deltaRadiusCorrectionC() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_DELTA_RADIUS_CORR_C);
#else
return DELTA_RADIUS_CORRECTION_C;
#endif
}
static inline float deltaDiagonalCorrectionA() {
return EEPROM_FLOAT(DELTA_DIAGONAL_CORRECTION_A);
}
static inline float deltaDiagonalCorrectionB() {
return EEPROM_FLOAT(DELTA_DIAGONAL_CORRECTION_B);
}
static inline float deltaDiagonalCorrectionC() {
return EEPROM_FLOAT(DELTA_DIAGONAL_CORRECTION_C);
}
static inline float deltaMaxRadius() {
return EEPROM_FLOAT(DELTA_MAX_RADIUS);
}
#endif
static void initalizeUncached();
#if MIXING_EXTRUDER
static void storeMixingRatios(bool updateChecksums = true);
static void readMixingRatios();
static void restoreMixingRatios();
#endif
static void setZCorrection(int32_t c,int index);
static inline int32_t getZCorrection(int index) {
return HAL::eprGetInt32(2048 + (index << 2));
}
static inline void setZCorrectionEnabled(int8_t on) {
#if EEPROM_MODE != 0
if(isZCorrectionEnabled() == on) return;
HAL::eprSetInt16(EPR_DISTORTION_CORRECTION_ENABLED, on);
EEPROM::updateChecksum();
#endif
}
static inline int8_t isZCorrectionEnabled() {
#if EEPROM_MODE != 0
return HAL::eprGetByte(EPR_DISTORTION_CORRECTION_ENABLED);
#else
return 0;
#endif
}
static inline float bendingCorrectionA() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_BENDING_CORRECTION_A);
#else
return BENDING_CORRECTION_A;
#endif
}
static inline float bendingCorrectionB() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_BENDING_CORRECTION_B);
#else
return BENDING_CORRECTION_B;
#endif
}
static inline float bendingCorrectionC() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_BENDING_CORRECTION_C);
#else
return BENDING_CORRECTION_C;
#endif
}
static inline float accelarationFactorTop() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_ACCELERATION_FACTOR_TOP);
#else
return ACCELERATION_FACTOR_TOP;
#endif
}
static inline float parkX() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_PARK_X);
#else
return PARK_POSITION_X;
#endif
}
static inline float parkY() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_PARK_Y);
#else
return PARK_POSITION_Y;
#endif
}
static inline float parkZ() {
#if EEPROM_MODE != 0
return HAL::eprGetFloat(EPR_PARK_Z);
#else
return PARK_POSITION_Z_RAISE;
#endif
}
};
#endif