vmario/Mister-Green
0
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ce3380206c
Mister-Green/Repetier-Firmware 1.0.3/Repetier/SDCard.cpp

816 lines
24 KiB
C++
Raw Normal View History

Beginn mit der Erstellung der Firmware-Config
2019-08-07 01:22:58 +02:00
/*
This file is part of Repetier-Firmware.
Repetier-Firmware is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Repetier-Firmware is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
This firmware is a nearly complete rewrite of the sprinter firmware
by kliment (https://github.com/kliment/Sprinter)
which based on Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
*/
#include "Repetier.h"
#if SDSUPPORT
char tempLongFilename[LONG_FILENAME_LENGTH + 1];
char fullName[LONG_FILENAME_LENGTH * SD_MAX_FOLDER_DEPTH + SD_MAX_FOLDER_DEPTH + 1];
#if NEW_COMMUNICATION
SDCardGCodeSource sdSource;
#endif
SDCard sd;
SDCard::SDCard() {
sdmode = 0;
sdactive = false;
savetosd = false;
Printer::setAutomount(false);
}
void SDCard::automount() {
#if SDCARDDETECT > -1
if(READ(SDCARDDETECT) != SDCARDDETECTINVERTED) {
if(sdactive || sdmode == 100) { // Card removed
Com::printFLN(PSTR("SD card removed"));
#if UI_DISPLAY_TYPE != NO_DISPLAY
uid.executeAction(UI_ACTION_TOP_MENU, true);
#endif
unmount();
UI_STATUS_UPD_F(Com::translatedF(UI_TEXT_SD_REMOVED_ID));
}
} else {
if(!sdactive && sdmode != 100) {
UI_STATUS_UPD_F(Com::translatedF(UI_TEXT_SD_INSERTED_ID));
mount();
if(sdmode != 100) // send message only if we have success
Com::printFLN(PSTR("SD card inserted")); // Not translatable or host will not understand signal
#if UI_DISPLAY_TYPE != NO_DISPLAY
if(sdactive && !uid.isWizardActive()) { // Wizards have priority
Printer::setAutomount(true);
uid.executeAction(UI_ACTION_SD_PRINT + UI_ACTION_TOPMENU, true);
}
#endif
}
}
#endif
}
void SDCard::initsd() {
sdactive = false;
#if SDSS > -1
#if SDCARDDETECT > -1
if(READ(SDCARDDETECT) != SDCARDDETECTINVERTED)
return;
#endif
HAL::pingWatchdog();
HAL::delayMilliseconds(50); // wait for stabilization of contacts, bootup ...
#if defined(ENABLE_SOFTWARE_SPI_CLASS) && ENABLE_SOFTWARE_SPI_CLASS
fat.begin(SDSS);
#else
fat.begin(SDSS, SD_SCK_MHZ(4)); // dummy init of SD_CARD
#endif
HAL::delayMilliseconds(50); // wait for init end
HAL::pingWatchdog();
/*if(dir[0].isOpen())
dir[0].close();*/
if (!fat.begin(SDSS, SD_SCK_MHZ(4))) {
Com::printFLN(Com::tSDInitFail);
sdmode = 100; // prevent automount loop!
if (fat.card()->errorCode()) {
Com::printFLN(PSTR(
"\nSD initialization failed.\n"
"Do not reformat the card!\n"
"Is the card correctly inserted?\n"
"Is chipSelect set to the correct value?\n"
"Does another SPI device need to be disabled?\n"
"Is there a wiring/soldering problem?"));
Com::printFLN(PSTR("errorCode: "), int(fat.card()->errorCode()));
return;
}
if (fat.vol()->fatType() == 0) {
Com::printFLN(PSTR("Can't find a valid FAT16/FAT32 partition.\n"));
return;
}
if (!fat.vwd()->isOpen()) {
Com::printFLN(PSTR("Can't open root directory.\n"));
return;
}
return;
}
Com::printFLN(PSTR("Card successfully initialized."));
sdactive = true;
Printer::setMenuMode(MENU_MODE_SD_MOUNTED, true);
HAL::pingWatchdog();
fat.chdir();
#if defined(EEPROM_AVAILABLE) && EEPROM_AVAILABLE == EEPROM_SDCARD
HAL::importEEPROM();
#endif
if(selectFile("init.g", true)) {
startPrint();
}
#endif
}
void SDCard::mount() {
sdmode = 0;
initsd();
}
void SDCard::unmount() {
sdmode = 0;
sdactive = false;
savetosd = false;
Printer::setAutomount(false);
Printer::setMenuMode(MENU_MODE_SD_MOUNTED + MENU_MODE_PAUSED + MENU_MODE_SD_PRINTING, false);
#if UI_DISPLAY_TYPE != NO_DISPLAY && SDSUPPORT
uid.cwd[0] = '/';
uid.cwd[1] = 0;
uid.folderLevel = 0;
#endif
Com::printFLN(PSTR("SD Card unmounted"));
}
void SDCard::startPrint() {
if(!sdactive) return;
sdmode = 1;
Printer::setMenuMode(MENU_MODE_SD_PRINTING, true);
Printer::setMenuMode(MENU_MODE_PAUSED, false);
Printer::setPrinting(true);
Printer::maxLayer = 0;
Printer::currentLayer = 0;
UI_STATUS_F(PSTR(""));
#if NEW_COMMUNICATION
GCodeSource::registerSource(&sdSource);
#endif
}
void SDCard::pausePrint(bool intern) {
if(!sdactive) return;
sdmode = 2; // finish running line
Printer::setMenuMode(MENU_MODE_PAUSED, true);
#if !defined(DISABLE_PRINTMODE_ON_PAUSE) || DISABLE_PRINTMODE_ON_PAUSE==1
Printer::setPrinting(false);
#endif
#if NEW_COMMUNICATION
GCodeSource::removeSource(&sdSource);
#endif
if(EVENT_SD_PAUSE_START(intern)) {
if(intern) {
Commands::waitUntilEndOfAllBuffers();
//sdmode = 0; // why ?
Printer::MemoryPosition();
Printer::moveToReal(IGNORE_COORDINATE, IGNORE_COORDINATE, IGNORE_COORDINATE,
Printer::memoryE - RETRACT_ON_PAUSE,
Printer::maxFeedrate[E_AXIS] / 2);
Printer::moveToParkPosition();
Printer::lastCmdPos[X_AXIS] = Printer::currentPosition[X_AXIS];
Printer::lastCmdPos[Y_AXIS] = Printer::currentPosition[Y_AXIS];
Printer::lastCmdPos[Z_AXIS] = Printer::currentPosition[Z_AXIS];
GCode::executeFString(PSTR(PAUSE_START_COMMANDS));
}
}
EVENT_SD_PAUSE_END(intern);
}
void SDCard::continuePrint(bool intern) {
if(!sd.sdactive) return;
if(EVENT_SD_CONTINUE_START(intern)) {
if(intern) {
GCode::executeFString(PSTR(PAUSE_END_COMMANDS));
Printer::GoToMemoryPosition(true, true, false, false, Printer::maxFeedrate[X_AXIS]);
Printer::GoToMemoryPosition(false, false, true, false, Printer::maxFeedrate[Z_AXIS] / 2.0f);
Printer::GoToMemoryPosition(false, false, false, true, Printer::maxFeedrate[E_AXIS] / 2.0f);
}
}
EVENT_SD_CONTINUE_END(intern);
#if NEW_COMMUNICATION
GCodeSource::registerSource(&sdSource);
#endif
Printer::setPrinting(true);
Printer::setMenuMode(MENU_MODE_PAUSED, false);
sdmode = 1;
}
void SDCard::stopPrint() {
if(!sd.sdactive) return;
if(sdmode)
Com::printFLN(PSTR("SD print stopped by user."));
sdmode = 0;
Printer::setMenuMode(MENU_MODE_SD_PRINTING, false);
Printer::setMenuMode(MENU_MODE_PAUSED, false);
Printer::setPrinting(0);
#if NEW_COMMUNICATION
GCodeSource::removeSource(&sdSource);
#endif
if(EVENT_SD_STOP_START) {
GCode::executeFString(PSTR(SD_RUN_ON_STOP));
if(SD_STOP_HEATER_AND_MOTORS_ON_STOP) {
Commands::waitUntilEndOfAllMoves();
Printer::kill(false);
}
}
EVENT_SD_STOP_END;
}
void SDCard::writeCommand(GCode *code) {
unsigned int sum1 = 0, sum2 = 0; // for fletcher-16 checksum
uint8_t buf[100];
uint8_t p = 2;
file.clearWriteError();
uint16_t params = 128 | (code->params & ~1);
memcopy2(buf, &params);
//*(int*)buf = params;
if(code->isV2()) { // Read G,M as 16 bit value
memcopy2(&buf[p], &code->params2);
//*(int*)&buf[p] = code->params2;
p += 2;
if(code->hasString())
buf[p++] = strlen(code->text);
if(code->hasM()) {
memcopy2(&buf[p], &code->M);
//*(int*)&buf[p] = code->M;
p += 2;
}
if(code->hasG()) {
memcopy2(&buf[p], &code->G);
//*(int*)&buf[p]= code->G;
p += 2;
}
} else {
if(code->hasM()) {
buf[p++] = (uint8_t)code->M;
}
if(code->hasG()) {
buf[p++] = (uint8_t)code->G;
}
}
if(code->hasX()) {
memcopy4(&buf[p], &code->X);
//*(float*)&buf[p] = code->X;
p += 4;
}
if(code->hasY()) {
memcopy4(&buf[p], &code->Y);
//*(float*)&buf[p] = code->Y;
p += 4;
}
if(code->hasZ()) {
memcopy4(&buf[p], &code->Z);
//*(float*)&buf[p] = code->Z;
p += 4;
}
if(code->hasE()) {
memcopy4(&buf[p], &code->E);
//*(float*)&buf[p] = code->E;
p += 4;
}
if(code->hasF()) {
memcopy4(&buf[p], &code->F);
//*(float*)&buf[p] = code->F;
p += 4;
}
if(code->hasT()) {
buf[p++] = code->T;
}
if(code->hasS()) {
memcopy4(&buf[p], &code->S);
//*(int32_t*)&buf[p] = code->S;
p += 4;
}
if(code->hasP()) {
memcopy4(&buf[p], &code->P);
//*(int32_t*)&buf[p] = code->P;
p += 4;
}
if(code->hasI()) {
memcopy4(&buf[p], &code->I);
//*(float*)&buf[p] = code->I;
p += 4;
}
if(code->hasJ()) {
memcopy4(&buf[p], &code->J);
//*(float*)&buf[p] = code->J;
p += 4;
}
if(code->hasR()) {
memcopy4(&buf[p], &code->R);
//*(float*)&buf[p] = code->R;
p += 4;
}
if(code->hasD()) {
memcopy4(&buf[p], &code->D);
//*(float*)&buf[p] = code->D;
p += 4;
}
if(code->hasC()) {
memcopy4(&buf[p], &code->C);
//*(float*)&buf[p] = code->C;
p += 4;
}
if(code->hasH()) {
memcopy4(&buf[p], &code->H);
//*(float*)&buf[p] = code->H;
p += 4;
}
if(code->hasA()) {
memcopy4(&buf[p], &code->A);
//*(float*)&buf[p] = code->A;
p += 4;
}
if(code->hasB()) {
memcopy4(&buf[p], &code->B);
//*(float*)&buf[p] = code->B;
p += 4;
}
if(code->hasK()) {
memcopy4(&buf[p], &code->K);
//*(float*)&buf[p] = code->K;
p += 4;
}
if(code->hasL()) {
memcopy4(&buf[p], &code->L);
//*(float*)&buf[p] = code->L;
p += 4;
}
if(code->hasO()) {
memcopy4(&buf[p], &code->O);
//*(float*)&buf[p] = code->O;
p += 4;
}
if(code->hasString()) { // read 16 uint8_t into string
char *sp = code->text;
if(code->isV2()) {
uint8_t i = strlen(code->text);
for(; i; i--) buf[p++] = *sp++;
} else {
for(uint8_t i = 0; i < 16; ++i) buf[p++] = *sp++;
}
}
uint8_t *ptr = buf;
uint8_t len = p;
while (len) {
uint8_t tlen = len > 21 ? 21 : len;
len -= tlen;
do {
sum1 += *ptr++;
if(sum1 >= 255) sum1 -= 255;
sum2 += sum1;
if(sum2 >= 255) sum2 -= 255;
} while (--tlen);
}
buf[p++] = sum1;
buf[p++] = sum2;
// Debug
/*Com::printF(PSTR("Buf: "));
for(int i=0;i<p;i++)
Com::printF(PSTR(" "),(int)buf[i]);
Com::println();*/
if(params == 128) {
Com::printErrorFLN(Com::tAPIDFinished);
} else
file.write(buf, p);
if (file.getWriteError()) {
Com::printFLN(Com::tErrorWritingToFile);
}
}
char *SDCard::createFilename(char *buffer, const dir_t &p) {
char *pos = buffer, *src = (char*)p.name;
for (uint8_t i = 0; i < 11; i++, src++) {
if (*src == ' ') continue;
if (i == 8)
*pos++ = '.';
*pos++ = *src;
}
*pos = 0;
return pos;
}
bool SDCard::showFilename(const uint8_t *name) {
if (*name == DIR_NAME_DELETED || *name == '.') return false;
return true;
}
int8_t RFstricmp(const char* s1, const char* s2) {
while(*s1 && (tolower(*s1) == tolower(*s2)))
s1++, s2++;
return (const uint8_t)tolower(*s1) - (const uint8_t)tolower(*s2);
}
int8_t RFstrnicmp(const char* s1, const char* s2, size_t n) {
while(n--) {
if(tolower(*s1) != tolower(*s2))
return (uint8_t)tolower(*s1) - (uint8_t)tolower(*s2);
s1++;
s2++;
}
return 0;
}
void SDCard::ls() {
SdBaseFile file;
Com::printFLN(Com::tBeginFileList);
fat.chdir();
file.openRoot(fat.vol());
file.ls(0, 0);
Com::printFLN(Com::tEndFileList);
}
#if JSON_OUTPUT
void SDCard::lsJSON(const char *filename) {
SdBaseFile dir;
fat.chdir();
if (*filename == 0) {
dir.openRoot(fat.vol());
} else {
if (!dir.open(fat.vwd(), filename, O_READ) || !dir.isDir()) {
Com::printF(Com::tJSONErrorStart);
Com::printF(Com::tFileOpenFailed);
Com::printFLN(Com::tJSONErrorEnd);
return;
}
}
Com::printF(Com::tJSONDir);
SDCard::printEscapeChars(filename);
Com::printF(Com::tJSONFiles);
dir.lsJSON();
Com::printFLN(Com::tJSONArrayEnd);
}
void SDCard::printEscapeChars(const char *s) {
for (unsigned int i = 0; i < strlen(s); ++i) {
switch (s[i]) {
case '"':
case '/':
case '\b':
case '\f':
case '\n':
case '\r':
case '\t':
case '\\':
Com::print('\\');
break;
}
Com::print(s[i]);
}
}
void SDCard::JSONFileInfo(const char* filename) {
SdFile targetFile;
GCodeFileInfo *info, tmpInfo;
if (strlen(filename) == 0) {
targetFile = file;
info = &fileInfo;
} else {
if (!targetFile.open(fat.vwd(), filename, O_READ) || targetFile.isDir()) {
Com::printF(Com::tJSONErrorStart);
Com::printF(Com::tFileOpenFailed);
Com::printFLN(Com::tJSONErrorEnd);
return;
}
info = &tmpInfo;
info->init(targetFile);
}
if (!targetFile.isOpen()) {
Com::printF(Com::tJSONErrorStart);
Com::printF(Com::tNotSDPrinting);
Com::printFLN(Com::tJSONErrorEnd);
return;
}
// {"err":0,"size":457574,"height":4.00,"layerHeight":0.25,"filament":[6556.3],"generatedBy":"Slic3r 1.1.7 on 2014-11-09 at 17:11:32"}
Com::printF(Com::tJSONFileInfoStart);
Com::print(info->fileSize);
Com::printF(Com::tJSONFileInfoHeight);
Com::print(info->objectHeight);
Com::printF(Com::tJSONFileInfoLayerHeight);
Com::print(info->layerHeight);
Com::printF(Com::tJSONFileInfoFilament);
Com::print(info->filamentNeeded);
Com::printF(Com::tJSONFileInfoGeneratedBy);
Com::print(info->generatedBy);
Com::print('"');
if (strlen(filename) == 0) {
Com::printF(Com::tJSONFileInfoName);
file.printName();
Com::print('"');
}
Com::print('}');
Com::println();
};
#endif
bool SDCard::selectFile(const char* filename, bool silent) {
const char* oldP = filename;
if (!sdactive)
return false;
sdmode = 0;
file.close();
// Filename for progress view
strncpy(Printer::printName, filename, 20);
Printer::printName[20] = 0;
if (file.open(fat.vwd(), filename, O_READ)) {
if ((oldP = strrchr(filename, '/')) != NULL)
oldP++;
else
oldP = filename;
if (!silent) {
Com::printF(Com::tFileOpened, oldP);
Com::printFLN(Com::tSpaceSizeColon, file.fileSize());
}
#if JSON_OUTPUT
fileInfo.init(file);
#endif
sdpos = 0;
filesize = file.fileSize();
Com::printFLN(Com::tFileSelected);
return true;
} else {
if (!silent)
Com::printFLN(Com::tFileOpenFailed);
return false;
}
}
void SDCard::printStatus() {
if(sdactive) {
Com::printF(Com::tSDPrintingByte, sdpos);
Com::printFLN(Com::tSlash, filesize);
} else {
Com::printFLN(Com::tNotSDPrinting);
}
}
void SDCard::startWrite(char *filename) {
if(!sdactive) return;
file.close();
sdmode = 0;
fat.chdir();
if(!file.open(filename, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
Com::printFLN(Com::tOpenFailedFile, filename);
} else {
UI_STATUS_F(Com::translatedF(UI_TEXT_UPLOADING_ID));
savetosd = true;
Com::printFLN(Com::tWritingToFile, filename);
}
}
void SDCard::finishWrite() {
if(!savetosd) return; // already closed or never opened
file.sync();
file.close();
savetosd = false;
Com::printFLN(Com::tDoneSavingFile);
UI_CLEAR_STATUS;
}
void SDCard::deleteFile(char *filename) {
if(!sdactive) return;
sdmode = 0;
file.close();
if(fat.remove(filename)) {
Com::printFLN(Com::tFileDeleted);
} else {
if(fat.rmdir(filename))
Com::printFLN(Com::tFileDeleted);
else
Com::printFLN(Com::tDeletionFailed);
}
}
void SDCard::makeDirectory(char *filename) {
if(!sdactive) return;
sdmode = 0;
file.close();
if(fat.mkdir(filename)) {
Com::printFLN(Com::tDirectoryCreated);
} else {
Com::printFLN(Com::tCreationFailed);
}
}
#ifdef GLENN_DEBUG
void SDCard::writeToFile() {
size_t nbyte;
char szName[10];
strcpy(szName, "Testing\r\n");
nbyte = file.write(szName, strlen(szName));
Com::print("L=");
Com::print((long)nbyte);
Com::println();
}
#endif
#endif
#if JSON_OUTPUT
// --------------------------------------------------------------- //
// Code that gets gcode information is adapted from RepRapFirmware //
// Originally licensed under GPL //
// Authors: reprappro, dc42, dcnewman, others //
// Source: https://github.com/dcnewman/RepRapFirmware //
// Copy date: 15 Nov 2015 //
// --------------------------------------------------------------- //
void GCodeFileInfo::init(SdFile &file) {
this->fileSize = file.fileSize();
this->filamentNeeded = 0.0;
this->objectHeight = 0.0;
this->layerHeight = 0.0;
if (!file.isOpen()) return;
bool genByFound = false, layerHeightFound = false, filamentNeedFound = false;
#if CPU_ARCH==ARCH_AVR
#define GCI_BUF_SIZE 120
#else
#define GCI_BUF_SIZE 1024
#endif
// READ 4KB FROM THE BEGINNING
char buf[GCI_BUF_SIZE];
for (int i = 0; i < 4096; i += GCI_BUF_SIZE - 50) {
if(!file.seekSet(i)) break;
file.read(buf, GCI_BUF_SIZE);
if (!genByFound && findGeneratedBy(buf, this->generatedBy)) genByFound = true;
if (!layerHeightFound && findLayerHeight(buf, this->layerHeight)) layerHeightFound = true;
if (!filamentNeedFound && findFilamentNeed(buf, this->filamentNeeded)) filamentNeedFound = true;
if(genByFound && layerHeightFound && filamentNeedFound) goto get_objectHeight;
}
// READ 4KB FROM END
for (int i = 0; i < 4096; i += GCI_BUF_SIZE - 50) {
if(!file.seekEnd(-4096 + i)) break;
file.read(buf, GCI_BUF_SIZE);
if (!genByFound && findGeneratedBy(buf, this->generatedBy)) genByFound = true;
if (!layerHeightFound && findLayerHeight(buf, this->layerHeight)) layerHeightFound = true;
if (!filamentNeedFound && findFilamentNeed(buf, this->filamentNeeded)) filamentNeedFound = true;
if(genByFound && layerHeightFound && filamentNeedFound) goto get_objectHeight;
}
get_objectHeight:
// MOVE FROM END UP IN 1KB BLOCKS UP TO 30KB
for (int i = GCI_BUF_SIZE; i < 30000; i += GCI_BUF_SIZE - 50) {
if(!file.seekEnd(-i)) break;
file.read(buf, GCI_BUF_SIZE);
if (findTotalHeight(buf, this->objectHeight)) break;
}
file.seekSet(0);
}
bool GCodeFileInfo::findGeneratedBy(char *buf, char *genBy) {
// Slic3r & S3D
const char* generatedByString = PSTR("generated by ");
char* pos = strstr_P(buf, generatedByString);
if (pos) {
pos += strlen_P(generatedByString);
size_t i = 0;
while (i < GENBY_SIZE - 1 && *pos >= ' ') {
char c = *pos++;
if (c == '"' || c == '\\') {
// Need to escape the quote-mark for JSON
if (i > GENBY_SIZE - 3) break;
genBy[i++] = '\\';
}
genBy[i++] = c;
}
genBy[i] = 0;
return true;
}
// CURA
const char* slicedAtString = PSTR(";Sliced at: ");
pos = strstr_P(buf, slicedAtString);
if (pos) {
strcpy_P(genBy, PSTR("Cura"));
return true;
}
// UNKNOWN
strcpy_P(genBy, PSTR("Unknown"));
return false;
}
bool GCodeFileInfo::findLayerHeight(char *buf, float &layerHeight) {
// SLIC3R
layerHeight = 0;
const char* layerHeightSlic3r = PSTR("; layer_height ");
char *pos = strstr_P(buf, layerHeightSlic3r);
if (pos) {
pos += strlen_P(layerHeightSlic3r);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos;
}
layerHeight = strtod(pos, NULL);
return true;
}
// CURA
const char* layerHeightCura = PSTR("Layer height: ");
pos = strstr_P(buf, layerHeightCura);
if (pos) {
pos += strlen_P(layerHeightCura);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos;
}
layerHeight = strtod(pos, NULL);
return true;
}
return false;
}
bool GCodeFileInfo::findFilamentNeed(char *buf, float &filament) {
const char* filamentUsedStr = PSTR("filament used");
const char* pos = strstr_P(buf, filamentUsedStr);
filament = 0;
if (pos != NULL) {
pos += strlen_P(filamentUsedStr);
while (*pos == ' ' || *pos == 't' || *pos == '=' || *pos == ':') {
++pos; // this allows for " = " from default slic3r comment and ": " from default Cura comment
}
if (isDigit(*pos)) {
char *q;
filament += strtod(pos, &q);
if (*q == 'm' && *(q + 1) != 'm') {
filament *= 1000.0; // Cura outputs filament used in metres not mm
}
}
return true;
}
return false;
}
bool GCodeFileInfo::findTotalHeight(char *buf, float &height) {
int len = 1024;
bool inComment, inRelativeMode = false;
unsigned int zPos;
for (int i = len - 5; i > 0; i--) {
if (inRelativeMode) {
inRelativeMode = !(buf[i] == 'G' && buf[i + 1] == '9' && buf[i + 2] == '1' && buf[i + 3] <= ' ');
} else if (buf[i] == 'G') {
// Ignore G0/G1 codes if absolute mode was switched back using G90 (typical for Cura files)
if (buf[i + 1] == '9' && buf[i + 2] == '0' && buf[i + 3] <= ' ') {
inRelativeMode = true;
} else if ((buf[i + 1] == '0' || buf[i + 1] == '1') && buf[i + 2] == ' ') {
// Look for last "G0/G1 ... Z#HEIGHT#" command as generated by common slicers
// Looks like we found a controlled move, however it could be in a comment, especially when using slic3r 1.1.1
inComment = false;
size_t j = i;
while (j != 0) {
--j;
char c = buf[j];
if (c == '\n' || c == '\r') break;
if (c == ';') {
// It is in a comment, so give up on this one
inComment = true;
break;
}
}
if (inComment) continue;
// Find 'Z' position and grab that value
zPos = 0;
for (int j = i + 3; j < len - 2; j++) {
char c = buf[j];
if (c < ' ') {
// Skip all white spaces...
while (j < len - 2 && c <= ' ') {
c = buf[++j];
}
// ...to make sure ";End" doesn't follow G0 .. Z#HEIGHT#
if (zPos != 0) {
//debugPrintf("Found at offset %u text: %.100s\n", zPos, &buf[zPos + 1]);
height = strtod(&buf[zPos + 1], NULL);
return true;
}
break;
} else if (c == ';') break;
else if (c == 'Z') zPos = j;
}
}
}
}
return false;
}
#endif // JSON_OUTPUT
Reference in New Issue Copy Permalink