no message

This commit is contained in:
Mario Voigt 2019-08-12 22:02:35 +02:00
parent a99bc054d7
commit 1f89160f44

View File

@ -44,6 +44,8 @@
// ################ END MANUAL SETTINGS ##########################
#undef FAN_PIN
#define FAN_PIN -1
#undef FAN_BOARD_PIN
#define FAN_BOARD_PIN -1
#define BOARD_FAN_SPEED 255
@ -71,9 +73,9 @@
#define MIXING_EXTRUDER 0
#define DRIVE_SYSTEM 0
#define XAXIS_STEPS_PER_MM 40
#define YAXIS_STEPS_PER_MM 200
#define ZAXIS_STEPS_PER_MM 4000
#define XAXIS_STEPS_PER_MM 100
#define YAXIS_STEPS_PER_MM 100
#define ZAXIS_STEPS_PER_MM 8000
#define EXTRUDER_FAN_COOL_TEMP 50
#define PDM_FOR_EXTRUDER 0
#define PDM_FOR_COOLER 0
@ -120,7 +122,7 @@
#define EXT0_WAIT_RETRACT_UNITS 0
#define EXT0_SELECT_COMMANDS ""
#define EXT0_DESELECT_COMMANDS ""
#define EXT0_EXTRUDER_COOLER_PIN -1
#define EXT0_EXTRUDER_COOLER_PIN ORIG_FAN_PIN
#define EXT0_EXTRUDER_COOLER_SPEED 255
#define EXT0_DECOUPLE_TEST_PERIOD 12000
#define EXT0_JAM_PIN -1
@ -335,7 +337,7 @@ It also can add a delay to wait for spindle to run on full speed.
#define Y_HOME_DIR -1
#define Z_HOME_DIR -1
#define X_MAX_LENGTH 215
#define Y_MAX_LENGTH 215
#define Y_MAX_LENGTH 175
#define Z_MAX_LENGTH 140
#define X_MIN_POS 0
#define Y_MIN_POS 0
@ -377,11 +379,11 @@ It also can add a delay to wait for spindle to run on full speed.
#define STEPPER_INACTIVE_TIME 360L
#define MAX_INACTIVE_TIME 0L
#define MAX_FEEDRATE_X 200
#define MAX_FEEDRATE_Y 40
#define MAX_FEEDRATE_Z 25
#define MAX_FEEDRATE_Y 200
#define MAX_FEEDRATE_Z 5
#define HOMING_FEEDRATE_X 100
#define HOMING_FEEDRATE_Y 100
#define HOMING_FEEDRATE_Z 10
#define HOMING_FEEDRATE_Z 3
#define HOMING_ORDER HOME_ORDER_ZXY
#define ZHOME_PRE_RAISE 0
#define ZHOME_PRE_RAISE_DISTANCE 10
@ -403,10 +405,10 @@ It also can add a delay to wait for spindle to run on full speed.
#define DOUBLE_STEP_DELAY 0 // time in microseconds
#define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_X 1000
#define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_Y 1000
#define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_Z 100
#define MAX_ACCELERATION_UNITS_PER_SQ_SECOND_Z 50
#define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_X 1000
#define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_Y 1000
#define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_Z 100
#define MAX_TRAVEL_ACCELERATION_UNITS_PER_SQ_SECOND_Z 50
#define INTERPOLATE_ACCELERATION_WITH_Z 0
#define ACCELERATION_FACTOR_TOP 100
#define MAX_JERK 20
@ -611,9 +613,9 @@ Values must be in range 1..255
"baudrate": 115200,
"bluetoothSerial": -1,
"bluetoothBaudrate": 115200,
"xStepsPerMM": 40,
"yStepsPerMM": 200,
"zStepsPerMM": 4000,
"xStepsPerMM": 100,
"yStepsPerMM": 100,
"zStepsPerMM": 8000,
"xInvert": 0,
"x2Invert": 0,
"xInvertEnable": 0,
@ -651,7 +653,7 @@ Values must be in range 1..255
"waitRetractUnits": 0,
"waitRetract": 0,
"stepsPerMM": 46.724,
"coolerPin": -1,
"coolerPin": "ORIG_FAN_PIN",
"coolerSpeed": 255,
"selectCommands": "",
"deselectCommands": "",
@ -700,14 +702,14 @@ Values must be in range 1..255
"xHomingSpeed": 100,
"xTravelAcceleration": 1000,
"xPrintAcceleration": 1000,
"yMaxSpeed": 40,
"yMaxSpeed": 200,
"yHomingSpeed": 100,
"yTravelAcceleration": 1000,
"yPrintAcceleration": 1000,
"zMaxSpeed": 25,
"zHomingSpeed": 10,
"zTravelAcceleration": 100,
"zPrintAcceleration": 100,
"zMaxSpeed": 5,
"zHomingSpeed": 3,
"zTravelAcceleration": 50,
"zPrintAcceleration": 50,
"xMotor": {
"name": "X motor",
"step": "ORIG_X_STEP_PIN",
@ -736,7 +738,7 @@ Values must be in range 1..255
"yMinPos": 0,
"zMinPos": 0,
"xLength": 215,
"yLength": 215,
"yLength": 175,
"zLength": 140,
"alwaysCheckEndstops": "1",
"disableX": "0",
@ -923,7 +925,7 @@ Values must be in range 1..255
"forceChecksum": "0",
"sdExtendedDir": "1",
"featureFanControl": "1",
"fanPin": "ORIG_FAN_PIN",
"fanPin": -1,
"featureFan2Control": "0",
"fan2Pin": "ORIG_FAN2_PIN",
"fanThermoPin": -1,