597 lines
18 KiB
C++
597 lines
18 KiB
C++
/*
|
|
This file is part of Repetier-Firmware.
|
|
|
|
Repetier-Firmware is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Repetier-Firmware is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
#ifndef _EEPROM_H
|
|
#define _EEPROM_H
|
|
|
|
// Id to distinguish version changes
|
|
#define EEPROM_PROTOCOL_VERSION 19
|
|
|
|
/** Where to start with our data block in memory. Can be moved if you
|
|
have problems with other modules using the eeprom */
|
|
|
|
#define EPR_MAGIC_BYTE 0
|
|
#define EPR_ACCELERATION_TYPE 1
|
|
#define EPR_XAXIS_STEPS_PER_MM 3
|
|
#define EPR_YAXIS_STEPS_PER_MM 7
|
|
#define EPR_ZAXIS_STEPS_PER_MM 11
|
|
#define EPR_X_MAX_FEEDRATE 15
|
|
#define EPR_Y_MAX_FEEDRATE 19
|
|
#define EPR_Z_MAX_FEEDRATE 23
|
|
#define EPR_X_HOMING_FEEDRATE 27
|
|
#define EPR_Y_HOMING_FEEDRATE 31
|
|
#define EPR_Z_HOMING_FEEDRATE 35
|
|
#define EPR_MAX_JERK 39
|
|
//#define EPR_OPS_MIN_DISTANCE 43
|
|
#define EPR_MAX_ZJERK 47
|
|
#define EPR_X_MAX_ACCEL 51
|
|
#define EPR_Y_MAX_ACCEL 55
|
|
#define EPR_Z_MAX_ACCEL 59
|
|
#define EPR_X_MAX_TRAVEL_ACCEL 63
|
|
#define EPR_Y_MAX_TRAVEL_ACCEL 67
|
|
#define EPR_Z_MAX_TRAVEL_ACCEL 71
|
|
#define EPR_BAUDRATE 75
|
|
#define EPR_MAX_INACTIVE_TIME 79
|
|
#define EPR_STEPPER_INACTIVE_TIME 83
|
|
//#define EPR_OPS_RETRACT_DISTANCE 87
|
|
//#define EPR_OPS_RETRACT_BACKLASH 91
|
|
#define EPR_EXTRUDER_SPEED 95
|
|
//#define EPR_OPS_MOVE_AFTER 99
|
|
//#define EPR_OPS_MODE 103
|
|
#define EPR_INTEGRITY_BYTE 104 // Here the xored sum over eeprom is stored
|
|
#define EPR_VERSION 105 // Version id for updates in EEPROM storage
|
|
#define EPR_BED_HEAT_MANAGER 106
|
|
#define EPR_BED_DRIVE_MAX 107
|
|
#define EPR_BED_PID_PGAIN 108
|
|
#define EPR_BED_PID_IGAIN 112
|
|
#define EPR_BED_PID_DGAIN 116
|
|
#define EPR_BED_PID_MAX 120
|
|
#define EPR_BED_DRIVE_MIN 124
|
|
#define EPR_PRINTING_TIME 125 // Time in seconds printing
|
|
#define EPR_PRINTING_DISTANCE 129 // Filament length printed
|
|
#define EPR_X_HOME_OFFSET 133
|
|
#define EPR_Y_HOME_OFFSET 137
|
|
#define EPR_Z_HOME_OFFSET 141
|
|
#define EPR_X_LENGTH 145
|
|
#define EPR_Y_LENGTH 149
|
|
#define EPR_Z_LENGTH 153
|
|
#define EPR_BACKLASH_X 157
|
|
#define EPR_BACKLASH_Y 161
|
|
#define EPR_BACKLASH_Z 165
|
|
|
|
#define EPR_Z_PROBE_X_OFFSET 800
|
|
#define EPR_Z_PROBE_Y_OFFSET 804
|
|
#define EPR_Z_PROBE_HEIGHT 808
|
|
#define EPR_Z_PROBE_SPEED 812
|
|
#define EPR_Z_PROBE_X1 816
|
|
#define EPR_Z_PROBE_Y1 820
|
|
#define EPR_Z_PROBE_X2 824
|
|
#define EPR_Z_PROBE_Y2 828
|
|
#define EPR_Z_PROBE_X3 832
|
|
#define EPR_Z_PROBE_Y3 836
|
|
#define EPR_Z_PROBE_XY_SPEED 840
|
|
#define EPR_AUTOLEVEL_MATRIX 844
|
|
#define EPR_AUTOLEVEL_ACTIVE 880
|
|
#define EPR_DELTA_DIAGONAL_ROD_LENGTH 881
|
|
#define EPR_DELTA_HORIZONTAL_RADIUS 885
|
|
#define EPR_DELTA_SEGMENTS_PER_SECOND_PRINT 889
|
|
#define EPR_DELTA_SEGMENTS_PER_SECOND_MOVE 891
|
|
#define EPR_DELTA_TOWERX_OFFSET_STEPS 893
|
|
#define EPR_DELTA_TOWERY_OFFSET_STEPS 895
|
|
#define EPR_DELTA_TOWERZ_OFFSET_STEPS 897
|
|
#define EPR_DELTA_ALPHA_A 901
|
|
#define EPR_DELTA_ALPHA_B 905
|
|
#define EPR_DELTA_ALPHA_C 909
|
|
#define EPR_DELTA_RADIUS_CORR_A 913
|
|
#define EPR_DELTA_RADIUS_CORR_B 917
|
|
#define EPR_DELTA_RADIUS_CORR_C 921
|
|
#define EPR_DELTA_MAX_RADIUS 925
|
|
#define EPR_Z_PROBE_BED_DISTANCE 929
|
|
#define EPR_DELTA_DIAGONAL_CORRECTION_A 933
|
|
#define EPR_DELTA_DIAGONAL_CORRECTION_B 937
|
|
#define EPR_DELTA_DIAGONAL_CORRECTION_C 941
|
|
#define EPR_TOUCHSCREEN 946 // - 975 = 30 byte for touchscreen calibration data
|
|
|
|
// Axis compensation
|
|
#define EPR_AXISCOMP_TANXY 976
|
|
#define EPR_AXISCOMP_TANYZ 980
|
|
#define EPR_AXISCOMP_TANXZ 984
|
|
|
|
#define EPR_DISTORTION_CORRECTION_ENABLED 988
|
|
#define EPR_RETRACTION_LENGTH 992
|
|
#define EPR_RETRACTION_LONG_LENGTH 996
|
|
#define EPR_RETRACTION_SPEED 1000
|
|
#define EPR_RETRACTION_Z_LIFT 1004
|
|
#define EPR_RETRACTION_UNDO_EXTRA_LENGTH 1008
|
|
#define EPR_RETRACTION_UNDO_EXTRA_LONG_LENGTH 1012
|
|
#define EPR_RETRACTION_UNDO_SPEED 1016
|
|
#define EPR_AUTORETRACT_ENABLED 1020
|
|
#define EPR_Z_PROBE_Z_OFFSET 1024
|
|
#define EPR_SELECTED_LANGUAGE 1028
|
|
#define EPR_ACCELERATION_FACTOR_TOP 1032
|
|
#define EPR_BENDING_CORRECTION_A 1036
|
|
#define EPR_BENDING_CORRECTION_B 1040
|
|
#define EPR_BENDING_CORRECTION_C 1044
|
|
#define EPR_BED_PREHEAT_TEMP 1048
|
|
#define EPR_X2AXIS_STEPS_PER_MM 1052
|
|
#define EPR_PARK_X 1056
|
|
#define EPR_PARK_Y 1060
|
|
#define EPR_PARK_Z 1064
|
|
|
|
|
|
|
|
#if EEPROM_MODE != 0
|
|
#define EEPROM_FLOAT(x) HAL::eprGetFloat(EPR_##x)
|
|
#define EEPROM_INT32(x) HAL::eprGetInt32(EPR_##x)
|
|
#define EEPROM_BYTE(x) HAL::eprGetByte(EPR_##x)
|
|
#define EEPROM_SET_BYTE(x,val) HAL::eprSetByte(EPR_##x,val)
|
|
#else
|
|
#define EEPROM_FLOAT(x) (float)(x)
|
|
#define EEPROM_INT32(x) (int32_t)(x)
|
|
#define EEPROM_BYTE(x) (uint8_t)(x)
|
|
#define EEPROM_SET_BYTE(x,val)
|
|
#endif
|
|
|
|
#define EEPROM_EXTRUDER_OFFSET 200
|
|
// bytes per extruder needed, leave some space for future development
|
|
#define EEPROM_EXTRUDER_LENGTH 100
|
|
// Extruder positions relative to extruder start
|
|
#define EPR_EXTRUDER_STEPS_PER_MM 0
|
|
#define EPR_EXTRUDER_MAX_FEEDRATE 4
|
|
// Feedrate from halted extruder in mm/s
|
|
#define EPR_EXTRUDER_MAX_START_FEEDRATE 8
|
|
// Acceleration in mm/s^2
|
|
#define EPR_EXTRUDER_MAX_ACCELERATION 12
|
|
#define EPR_EXTRUDER_HEAT_MANAGER 16
|
|
#define EPR_EXTRUDER_DRIVE_MAX 17
|
|
#define EPR_EXTRUDER_PID_PGAIN 18
|
|
#define EPR_EXTRUDER_PID_IGAIN 22
|
|
#define EPR_EXTRUDER_PID_DGAIN 26
|
|
#define EPR_EXTRUDER_DEADTIME EPR_EXTRUDER_PID_PGAIN
|
|
#define EPR_EXTRUDER_PID_MAX 30
|
|
#define EPR_EXTRUDER_X_OFFSET 31
|
|
#define EPR_EXTRUDER_Y_OFFSET 35
|
|
#define EPR_EXTRUDER_WATCH_PERIOD 39
|
|
#define EPR_EXTRUDER_ADVANCE_K 41
|
|
#define EPR_EXTRUDER_DRIVE_MIN 45
|
|
#define EPR_EXTRUDER_ADVANCE_L 46
|
|
#define EPR_EXTRUDER_WAIT_RETRACT_TEMP 50
|
|
#define EPR_EXTRUDER_WAIT_RETRACT_UNITS 52
|
|
#define EPR_EXTRUDER_COOLER_SPEED 54
|
|
// 55-57 free for byte sized parameter
|
|
#define EPR_EXTRUDER_MIXING_RATIOS 58 // 16*2 byte ratios = 32 byte -> end = 89
|
|
#define EPR_EXTRUDER_Z_OFFSET 90
|
|
#define EPR_EXTRUDER_PREHEAT 94 // maybe better temperature
|
|
#ifndef Z_PROBE_BED_DISTANCE
|
|
#define Z_PROBE_BED_DISTANCE 5.0
|
|
#endif
|
|
|
|
class EEPROM
|
|
{
|
|
#if EEPROM_MODE != 0
|
|
static void writeExtruderPrefix(uint pos);
|
|
static void writeFloat(uint pos,PGM_P text,uint8_t digits = 3);
|
|
static void writeLong(uint pos,PGM_P text);
|
|
static void writeInt(uint pos,PGM_P text);
|
|
static void writeByte(uint pos,PGM_P text);
|
|
public:
|
|
static uint8_t computeChecksum();
|
|
static void updateChecksum();
|
|
#endif
|
|
public:
|
|
|
|
static void init();
|
|
static void initBaudrate();
|
|
static void storeDataIntoEEPROM(uint8_t corrupted = 0);
|
|
static void readDataFromEEPROM(bool includeExtruder);
|
|
static void restoreEEPROMSettingsFromConfiguration();
|
|
static void writeSettings();
|
|
static void update(GCode *com);
|
|
static void updatePrinterUsage();
|
|
static inline void setVersion(uint8_t v) {
|
|
#if EEPROM_MODE != 0
|
|
HAL::eprSetByte(EPR_VERSION,v);
|
|
HAL::eprSetByte(EPR_INTEGRITY_BYTE,computeChecksum());
|
|
#endif
|
|
}
|
|
static inline uint8_t getStoredLanguage() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetByte(EPR_SELECTED_LANGUAGE);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
#if FEATURE_Z_PROBE
|
|
static inline void setZProbeHeight(float mm) {
|
|
#if EEPROM_MODE != 0
|
|
HAL::eprSetFloat(EPR_Z_PROBE_HEIGHT, mm);
|
|
Com::printFLN(PSTR("Z-Probe height set to: "),mm,3);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
static inline float zProbeZOffset() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_Z_OFFSET);
|
|
#else
|
|
return Z_PROBE_Z_OFFSET;
|
|
#endif
|
|
}
|
|
static inline float zProbeSpeed() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_SPEED);
|
|
#else
|
|
return Z_PROBE_SPEED;
|
|
#endif
|
|
}
|
|
static inline float zProbeXYSpeed() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_XY_SPEED);
|
|
#else
|
|
return Z_PROBE_XY_SPEED;
|
|
#endif
|
|
}
|
|
static inline float zProbeXOffset() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_X_OFFSET);
|
|
#else
|
|
return Z_PROBE_X_OFFSET;
|
|
#endif
|
|
}
|
|
static inline float zProbeYOffset() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_Y_OFFSET);
|
|
#else
|
|
return Z_PROBE_Y_OFFSET;
|
|
#endif
|
|
}
|
|
static inline float zProbeHeight() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_HEIGHT);
|
|
#else
|
|
return Z_PROBE_HEIGHT;
|
|
#endif
|
|
}
|
|
static inline float zProbeX1() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_X1);
|
|
#else
|
|
return Z_PROBE_X1;
|
|
#endif
|
|
}
|
|
static inline float zProbeY1() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_Y1);
|
|
#else
|
|
return Z_PROBE_Y1;
|
|
#endif
|
|
}
|
|
static inline float zProbeX2() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_X2);
|
|
#else
|
|
return Z_PROBE_X2;
|
|
#endif
|
|
}
|
|
static inline float zProbeY2() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_Y2);
|
|
#else
|
|
return Z_PROBE_Y2;
|
|
#endif
|
|
}
|
|
static inline float zProbeX3() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_X3);
|
|
#else
|
|
return Z_PROBE_X3;
|
|
#endif
|
|
}
|
|
static inline float zProbeY3() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_Y3);
|
|
#else
|
|
return Z_PROBE_Y3;
|
|
#endif
|
|
}
|
|
static inline float zProbeBedDistance() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_Z_PROBE_BED_DISTANCE);
|
|
#else
|
|
return Z_PROBE_BED_DISTANCE;
|
|
#endif
|
|
}
|
|
|
|
static inline float axisCompTanXY() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_AXISCOMP_TANXY);
|
|
#else
|
|
return AXISCOMP_TANXY;
|
|
#endif
|
|
}
|
|
static inline float axisCompTanYZ() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_AXISCOMP_TANYZ);
|
|
#else
|
|
return AXISCOMP_TANYZ;
|
|
#endif
|
|
}
|
|
static inline float axisCompTanXZ() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_AXISCOMP_TANXZ);
|
|
#else
|
|
return AXISCOMP_TANXZ;
|
|
#endif
|
|
}
|
|
|
|
#if NONLINEAR_SYSTEM
|
|
static inline int16_t deltaSegmentsPerSecondMove() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetInt16(EPR_DELTA_SEGMENTS_PER_SECOND_MOVE);
|
|
#else
|
|
return DELTA_SEGMENTS_PER_SECOND_MOVE;
|
|
#endif
|
|
}
|
|
static inline float deltaDiagonalRodLength() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_DIAGONAL_ROD_LENGTH);
|
|
#else
|
|
return DELTA_DIAGONAL_ROD;
|
|
#endif
|
|
}
|
|
static inline int16_t deltaSegmentsPerSecondPrint() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetInt16(EPR_DELTA_SEGMENTS_PER_SECOND_PRINT);
|
|
#else
|
|
return DELTA_SEGMENTS_PER_SECOND_PRINT;
|
|
#endif
|
|
}
|
|
#endif
|
|
#if DRIVE_SYSTEM == DELTA
|
|
static inline float deltaHorizontalRadius() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_HORIZONTAL_RADIUS);
|
|
#else
|
|
return ROD_RADIUS;
|
|
#endif
|
|
}
|
|
static inline int16_t deltaTowerXOffsetSteps() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetInt16(EPR_DELTA_TOWERX_OFFSET_STEPS);
|
|
#else
|
|
return DELTA_X_ENDSTOP_OFFSET_STEPS;
|
|
#endif
|
|
}
|
|
static inline int16_t deltaTowerYOffsetSteps() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetInt16(EPR_DELTA_TOWERY_OFFSET_STEPS);
|
|
#else
|
|
return DELTA_Y_ENDSTOP_OFFSET_STEPS;
|
|
#endif
|
|
}
|
|
static inline int16_t deltaTowerZOffsetSteps() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetInt16(EPR_DELTA_TOWERZ_OFFSET_STEPS);
|
|
#else
|
|
return DELTA_Z_ENDSTOP_OFFSET_STEPS;
|
|
#endif
|
|
}
|
|
|
|
static inline void setRodRadius(float mm) {
|
|
#if DRIVE_SYSTEM == DELTA
|
|
Printer::radius0=mm;
|
|
Printer::updateDerivedParameter();
|
|
#if EEPROM_MODE != 0
|
|
//This is an odd situation, the radius can only be changed if eeprom is on.
|
|
// The radius is not saved to printer variable now, it is all derived parameters of
|
|
// fetching the radius, which if EEProm is off returns the Configuration constant.
|
|
HAL::eprSetFloat(EPR_DELTA_HORIZONTAL_RADIUS, mm);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
#endif
|
|
}
|
|
static inline void incrementRodRadius(float mm) {
|
|
setRodRadius(mm + deltaHorizontalRadius());
|
|
}
|
|
static inline void setTowerXFloor(float newZ) {
|
|
#if DRIVE_SYSTEM == DELTA
|
|
Printer::xMin = newZ;
|
|
Printer::updateDerivedParameter();
|
|
Com::printFLN(PSTR("X (A) tower floor set to: "),Printer::xMin,3);
|
|
#if EEPROM_MODE != 0
|
|
HAL::eprSetFloat(EPR_X_HOME_OFFSET,Printer::xMin);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
#endif
|
|
}
|
|
static inline void setTowerYFloor(float newZ) {
|
|
#if DRIVE_SYSTEM == DELTA
|
|
Printer::yMin = newZ;
|
|
Printer::updateDerivedParameter();
|
|
Com::printFLN(PSTR("Y (B) tower floor set to: "), Printer::yMin, 3);
|
|
#if EEPROM_MODE != 0
|
|
|
|
HAL::eprSetFloat(EPR_Y_HOME_OFFSET,Printer::yMin);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
#endif
|
|
}
|
|
static inline void setTowerZFloor(float newZ) {
|
|
#if DRIVE_SYSTEM == DELTA
|
|
Printer::zMin = newZ;
|
|
Printer::updateDerivedParameter();
|
|
Com::printFLN(PSTR("Z (C) tower floor set to: "), Printer::zMin, 3);
|
|
#if EEPROM_MODE != 0
|
|
HAL::eprSetFloat(EPR_Z_HOME_OFFSET,Printer::zMin);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
#endif
|
|
}
|
|
static inline void setDeltaTowerXOffsetSteps(int16_t steps) {
|
|
#if EEPROM_MODE != 0
|
|
HAL::eprSetInt16(EPR_DELTA_TOWERX_OFFSET_STEPS,steps);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
}
|
|
static inline void setDeltaTowerYOffsetSteps(int16_t steps) {
|
|
#if EEPROM_MODE != 0
|
|
HAL::eprSetInt16(EPR_DELTA_TOWERY_OFFSET_STEPS,steps);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
}
|
|
static inline void setDeltaTowerZOffsetSteps(int16_t steps) {
|
|
#if EEPROM_MODE != 0
|
|
HAL::eprSetInt16(EPR_DELTA_TOWERZ_OFFSET_STEPS,steps);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
}
|
|
static inline float deltaAlphaA() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_ALPHA_A);
|
|
#else
|
|
return DELTA_ALPHA_A;
|
|
#endif
|
|
}
|
|
static inline float deltaAlphaB() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_ALPHA_B);
|
|
#else
|
|
return DELTA_ALPHA_B;
|
|
#endif
|
|
}
|
|
static inline float deltaAlphaC() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_ALPHA_C);
|
|
#else
|
|
return DELTA_ALPHA_C;
|
|
#endif
|
|
}
|
|
static inline float deltaRadiusCorrectionA() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_RADIUS_CORR_A);
|
|
#else
|
|
return DELTA_RADIUS_CORRECTION_A;
|
|
#endif
|
|
}
|
|
static inline float deltaRadiusCorrectionB() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_RADIUS_CORR_B);
|
|
#else
|
|
return DELTA_RADIUS_CORRECTION_B;
|
|
#endif
|
|
}
|
|
static inline float deltaRadiusCorrectionC() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_DELTA_RADIUS_CORR_C);
|
|
#else
|
|
return DELTA_RADIUS_CORRECTION_C;
|
|
#endif
|
|
}
|
|
static inline float deltaDiagonalCorrectionA() {
|
|
return EEPROM_FLOAT(DELTA_DIAGONAL_CORRECTION_A);
|
|
}
|
|
static inline float deltaDiagonalCorrectionB() {
|
|
return EEPROM_FLOAT(DELTA_DIAGONAL_CORRECTION_B);
|
|
}
|
|
static inline float deltaDiagonalCorrectionC() {
|
|
return EEPROM_FLOAT(DELTA_DIAGONAL_CORRECTION_C);
|
|
}
|
|
static inline float deltaMaxRadius() {
|
|
return EEPROM_FLOAT(DELTA_MAX_RADIUS);
|
|
}
|
|
|
|
#endif
|
|
static void initalizeUncached();
|
|
#if MIXING_EXTRUDER
|
|
static void storeMixingRatios(bool updateChecksums = true);
|
|
static void readMixingRatios();
|
|
static void restoreMixingRatios();
|
|
#endif
|
|
|
|
static void setZCorrection(int32_t c,int index);
|
|
static inline int32_t getZCorrection(int index) {
|
|
return HAL::eprGetInt32(2048 + (index << 2));
|
|
}
|
|
static inline void setZCorrectionEnabled(int8_t on) {
|
|
#if EEPROM_MODE != 0
|
|
if(isZCorrectionEnabled() == on) return;
|
|
HAL::eprSetInt16(EPR_DISTORTION_CORRECTION_ENABLED, on);
|
|
EEPROM::updateChecksum();
|
|
#endif
|
|
}
|
|
static inline int8_t isZCorrectionEnabled() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetByte(EPR_DISTORTION_CORRECTION_ENABLED);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
static inline float bendingCorrectionA() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_BENDING_CORRECTION_A);
|
|
#else
|
|
return BENDING_CORRECTION_A;
|
|
#endif
|
|
}
|
|
static inline float bendingCorrectionB() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_BENDING_CORRECTION_B);
|
|
#else
|
|
return BENDING_CORRECTION_B;
|
|
#endif
|
|
}
|
|
static inline float bendingCorrectionC() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_BENDING_CORRECTION_C);
|
|
#else
|
|
return BENDING_CORRECTION_C;
|
|
#endif
|
|
}
|
|
static inline float accelarationFactorTop() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_ACCELERATION_FACTOR_TOP);
|
|
#else
|
|
return ACCELERATION_FACTOR_TOP;
|
|
#endif
|
|
}
|
|
static inline float parkX() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_PARK_X);
|
|
#else
|
|
return PARK_POSITION_X;
|
|
#endif
|
|
}
|
|
static inline float parkY() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_PARK_Y);
|
|
#else
|
|
return PARK_POSITION_Y;
|
|
#endif
|
|
}
|
|
static inline float parkZ() {
|
|
#if EEPROM_MODE != 0
|
|
return HAL::eprGetFloat(EPR_PARK_Z);
|
|
#else
|
|
return PARK_POSITION_Z_RAISE;
|
|
#endif
|
|
}
|
|
|
|
};
|
|
#endif
|