1801 lines
88 KiB
C
1801 lines
88 KiB
C
/*
|
|
This file is part of Repetier-Firmware.
|
|
|
|
Repetier-Firmware is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Repetier-Firmware is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
#if !defined(UI_DISPLAY_CHARSET) || UI_DISPLAY_CHARSET>3
|
|
#define UI_DISPLAY_CHARSET 1
|
|
#endif
|
|
|
|
//Symbolic character values for specific symbols.
|
|
//May be overridden for different controllers, charactersets, etc.
|
|
#define cUP "\001"
|
|
#define cDEG "\002"
|
|
#define cSEL "\003"
|
|
#define cUNSEL "\004"
|
|
#define cTEMP "\005"
|
|
#define cFOLD "\006"
|
|
#define bFOLD 6
|
|
#define cARROW "\176"
|
|
|
|
#if UI_DISPLAY_CHARSET==0 // ASCII fallback
|
|
#define CHAR_RIGHT '-'
|
|
#define CHAR_SELECTOR '>'
|
|
#define CHAR_SELECTED '*'
|
|
#define STR_auml "ae"
|
|
#define STR_Auml "Ae"
|
|
#define STR_uuml "ue"
|
|
#define STR_Uuml "Ue"
|
|
#define STR_ouml "oe"
|
|
#define STR_Ouml "Oe"
|
|
#define STR_szlig "ss"
|
|
#endif
|
|
|
|
#if UI_DISPLAY_CHARSET==1 // HD44870 charset with knji chars
|
|
#define CHAR_RIGHT 0x7e
|
|
#define CHAR_SELECTOR '>'
|
|
#define CHAR_SELECTED '*'
|
|
#define STR_auml "\xe1"
|
|
#define STR_Auml "Ae"
|
|
#define STR_uuml "\365"
|
|
#define STR_Uuml "Ue"
|
|
#define STR_ouml "\357"
|
|
#define STR_Ouml "Oe"
|
|
#define STR_szlig "\342"
|
|
#endif
|
|
|
|
#if UI_DISPLAY_CHARSET==2 // Western charset
|
|
#define CHAR_RIGHT 0xbc
|
|
#define CHAR_SELECTOR 0xf6
|
|
#define CHAR_SELECTED '*'
|
|
#define STR_auml "\204"
|
|
#define STR_Auml "\216"
|
|
#define STR_uuml "\201"
|
|
#define STR_Uuml "\212"
|
|
#define STR_ouml "\204"
|
|
#define STR_Ouml "\211"
|
|
#define STR_szlig "160"
|
|
#endif
|
|
|
|
|
|
#if UI_DISPLAY_CHARSET==3 // U8glib
|
|
#define CHAR_RIGHT 187 //>>
|
|
#define CHAR_SELECTOR 255 //'>'
|
|
#define CHAR_SELECTED 254 //'*'
|
|
#define STR_auml "\344"
|
|
#define STR_Auml "\304"
|
|
#define STR_uuml "\374"
|
|
#define STR_Uuml "\334"
|
|
#define STR_ouml "\366"
|
|
#define STR_Ouml "\326"
|
|
#define STR_szlig "\337"
|
|
#endif
|
|
#define TEST176 "176\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277"
|
|
#define TEST192 "192\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317"
|
|
#define TEST208 "208\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337"
|
|
#define TEST224 "224\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357"
|
|
|
|
|
|
// At first all terms in english are defined. After that the selected language
|
|
// can overwrite the definition. That way new strings are at least in english
|
|
// available.
|
|
|
|
#define UI_TEXT_ON "On"
|
|
#define UI_TEXT_OFF "Off"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Yes"
|
|
#define UI_TEXT_NO "No"
|
|
#define UI_TEXT_SEL cSEL
|
|
#define UI_TEXT_NOSEL cUNSEL
|
|
#define UI_TEXT_PRINT_POS "Printing..."
|
|
#define UI_TEXT_PRINTING "Printing"
|
|
#define UI_TEXT_IDLE "Idle"
|
|
#define UI_TEXT_NOSDCARD "No SD Card"
|
|
#define UI_TEXT_ERROR "**** ERROR ****"
|
|
#define UI_TEXT_BACK "Back " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Quick Settings"
|
|
#define UI_TEXT_CONFIGURATION "Configuration"
|
|
#define UI_TEXT_POSITION "Position"
|
|
#define UI_TEXT_ADJTEMPS "Adjust Temps"
|
|
#define UI_TEXT_EXTRUDER "Extruder"
|
|
#define UI_TEXT_SD_CARD "SD Card"
|
|
#define UI_TEXT_DEBUGGING "Debugging"
|
|
#define UI_TEXT_HOME_DELTA "Home Delta"
|
|
#define UI_TEXT_HOME_ALL "Home All"
|
|
#define UI_TEXT_HOME_X "Home X"
|
|
#define UI_TEXT_HOME_Y "Home Y"
|
|
#define UI_TEXT_HOME_Z "Home Z"
|
|
#define UI_TEXT_PREHEAT_PLA "Preheat PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Preheat ABS"
|
|
#define UI_TEXT_LIGHTS_ONOFF "Lights :%lo"
|
|
#define UI_TEXT_COOLDOWN "Cooldown"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Set to Origin"
|
|
#define UI_TEXT_DISABLE_STEPPER "Disable stepper"
|
|
#define UI_TEXT_X_POSITION "X Position"
|
|
#define UI_TEXT_X_POS_FAST "X Pos. Fast"
|
|
#define UI_TEXT_Y_POSITION "Y Position"
|
|
#define UI_TEXT_Y_POS_FAST "Y Pos. Fast"
|
|
#define UI_TEXT_Z_POSITION "Z Position"
|
|
#define UI_TEXT_Z_POS_FAST "Z Pos. Fast"
|
|
#define UI_TEXT_E_POSITION "Extr. position"
|
|
#define UI_TEXT_BED_TEMP "Bed Temp: %Eb" cDEG "C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1 : %E0" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2 : %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR2_TEMP "Temp. 3 : %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Turn Extr. 1 Off"
|
|
#define UI_TEXT_EXTR1_OFF "Turn Extr. 2 Off"
|
|
#define UI_TEXT_EXTR2_OFF "Turn Extr. 3 Off"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Select Extr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Select Extr. 2"
|
|
#define UI_TEXT_EXTR2_SELECT "%X2 Select Extr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "Set Origin"
|
|
#define UI_TEXT_PRINT_X "Print X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Print Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Print Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Print:%az"
|
|
#define UI_TEXT_MOVE_X "Move X :%aX"
|
|
#define UI_TEXT_MOVE_Y "Move Y :%aY"
|
|
#define UI_TEXT_MOVE_Z "Move Z :%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Move:%aZ"
|
|
#define UI_TEXT_JERK "Jerk :%aj"
|
|
#define UI_TEXT_ZJERK "Z-Jerk :%aJ"
|
|
#define UI_TEXT_ACCELERATION "Acceleration"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Store to EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Load f. EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Errors :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Dry run:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Off"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Classic"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Fast"
|
|
#define UI_TEXT_OPS_RETRACT "Retract :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.dist :%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Move after:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti Ooze"
|
|
#define UI_TEXT_PRINT_FILE "Print file"
|
|
#define UI_TEXT_PAUSE_PRINT "Pause Print"
|
|
#define UI_TEXT_CONTINUE_PRINT "Continue Print"
|
|
#define UI_TEXT_UNMOUNT_CARD "Unmount Card"
|
|
#define UI_TEXT_MOUNT_CARD "Mount Card"
|
|
#define UI_TEXT_DELETE_FILE "Delete file"
|
|
#define UI_TEXT_FEEDRATE "Feedrate"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Home X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Home Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Home Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Home:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min endstop:%sx","Max endstop:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min endstop:%sy","Max endstop:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min endstop:%sz","Max endstop:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min endstop:%sx","Max endstop:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min endstop:%sy","Max endstop:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min endstop:%sz","Max endstop:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 click = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Fan speed"
|
|
#define UI_TEXT_ACTION_FANSPEED "Fan speed:%Fs%%%"
|
|
#define UI_TEXT_FAN_OFF "Turn Fan Off"
|
|
#define UI_TEXT_FAN_25 "Set Fan 25%%%"
|
|
#define UI_TEXT_FAN_50 "Set Fan 50%%%"
|
|
#define UI_TEXT_FAN_75 "Set Fan 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Set Fan Full"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Stepper Inactive"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Dis. After:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. Inactive"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Dis. After:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "General"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Steps/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Accel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab.Time:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Control:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Action:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Heating Extruder"
|
|
#define UI_TEXT_HEATING_BED "Heating Bed"
|
|
#define UI_TEXT_KILLED "Killed"
|
|
#define UI_TEXT_STEPPER_DISABLED "Stepper Disabled"
|
|
#define UI_TEXT_EEPROM_STORED "Configuration","stored in EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Configuration","loaded f. EEPROM"
|
|
#define UI_TEXT_UPLOADING "Uploading..."
|
|
#define UI_TEXT_PAGE_BUFFER "Buffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Speed Mul.:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Flow Mul. :%of%%%"
|
|
#define UI_TEXT_HORIZONTAL_RADIUS "H. Radius :%oh"
|
|
#define UI_TEXT_SHOW_MEASUREMENT "Show meas."
|
|
#define UI_TEXT_RESET_MEASUREMENT "Reset meas."
|
|
#define UI_TEXT_SET_MEASURED_ORIGIN "Set Z=0.0"
|
|
#define UI_TEXT_AUTOLEVEL_FULL "Full Auto Level"
|
|
#define UI_TEXT_SET_ADVANCED "Unlock Full Menu"
|
|
#define UI_TEXT_SET_SIMPLE "Unlock Simple Menu"
|
|
#define UI_TEXT_CALIBRATING_ENDSTOPS "Calibrating:","Endstop Offsets","","Please Wait"
|
|
#define UI_TEXT_CALIBRATING_HEIGHT "Calibrating:","Printer Z Height","","Please Wait"
|
|
#define UI_TEXT_CALIBRATING_RADIUS "Calibrating:","Horizontal Radius","","Please Wait"
|
|
#define UI_TEXT_CALIBRATING_BED "Calibrating:","Bed Level Matrix","","Please Wait"
|
|
#define UI_TEXT_CAL_PREHEAT "Preheating","Keep Hands Away","","Please Wait"
|
|
#define UI_TEXT_CLEAN_BED1 "MAKE SURE NOZZLE &"
|
|
#define UI_TEXT_CLEAN_BED2 "BED ARE CLEAN"
|
|
#define UI_TEXT_OK "Begin Calibration"
|
|
#define UI_TEXT_ZCALIB "Calibration Menu"
|
|
#define UI_TEXT_SET_P1 "Set P1"
|
|
#define UI_TEXT_SET_P2 "Set P2"
|
|
#define UI_TEXT_SET_P3 "Set P3"
|
|
#define UI_TEXT_CALCULATE_LEVELING "Calculate Leveling"
|
|
#define UI_TEXT_LEVEL "Level delta"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Wait Temp. %XT" cDEG "C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Wait Units: %XU mm"
|
|
#define UI_TEXT_SD_REMOVED "SD Card removed"
|
|
#define UI_TEXT_SD_INSERTED "SD Card inserted"
|
|
#define UI_TEXT_PRINTER_READY "Printer ready."
|
|
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
|
|
// ___88 days 12:45
|
|
#define UI_TEXT_PRINTTIME_DAYS " days "
|
|
#define UI_TEXT_PRINTTIME_HOURS ":"
|
|
#define UI_TEXT_PRINTTIME_MINUTES ""
|
|
#define UI_TEXT_PRINT_TIME "Printing time"
|
|
#define UI_TEXT_PRINT_FILAMENT "Filament printed"
|
|
#define UI_TEXT_PRINTED "printed"
|
|
#define UI_TEXT_POWER "ATX power on/off"
|
|
#define UI_TEXT_STRING_HM_DEADTIME "Dead Time"
|
|
#define UI_TEXT_STRING_HM_SLOWBANG "SlowBang"
|
|
#define UI_TEXT_STOP_PRINT "Stop Print"
|
|
#define UI_TEXT_Z_BABYSTEPPING "Z Babystepping"
|
|
#define UI_TEXT_CHANGE_FILAMENT "Change filament"
|
|
#define UI_TEXT_WIZ_CH_FILAMENT1 "Change filament"
|
|
#define UI_TEXT_WIZ_CH_FILAMENT2 "Rotate to move"
|
|
#define UI_TEXT_WIZ_CH_FILAMENT3 "filament up/down"
|
|
#define UI_TEXT_CLICK_DONE "Click when done"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
// *************** German translation ****************
|
|
|
|
#if UI_LANGUAGE==1
|
|
|
|
#define UI_TEXT_ON "An"
|
|
#define UI_TEXT_OFF "Aus"
|
|
#define UI_TEXT_NA "nv"
|
|
#define UI_TEXT_YES "Ja"
|
|
#define UI_TEXT_NO "Nein"
|
|
#define UI_TEXT_PRINT_POS "Drucke..."
|
|
#define UI_TEXT_PRINTING "Drucken"
|
|
#define UI_TEXT_IDLE "Leerlauf"
|
|
#define UI_TEXT_NOSDCARD "Keine SD Karte"
|
|
#define UI_TEXT_ERROR "**** FEHLER ****"
|
|
#define UI_TEXT_BACK "Zur" STR_uuml "ck " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Schnelleinst."
|
|
#define UI_TEXT_CONFIGURATION "Konfiguration"
|
|
#define UI_TEXT_POSITION "Position"
|
|
#define UI_TEXT_EXTRUDER "Extruder"
|
|
#define UI_TEXT_SD_CARD "SD Karte"
|
|
#define UI_TEXT_DEBUGGING "Debugging"
|
|
#define UI_TEXT_HOME_ALL "Home Alle"
|
|
#define UI_TEXT_HOME_X "Home X"
|
|
#define UI_TEXT_HOME_Y "Home Y"
|
|
#define UI_TEXT_HOME_Z "Home Z"
|
|
#define UI_TEXT_PREHEAT_PLA "Vorheizen PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Vorheizen ABS"
|
|
#define UI_TEXT_LIGHTS_ONOFF "Lampen: %lo"
|
|
#define UI_TEXT_COOLDOWN "Abk" STR_uuml "hlen"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Setze Nullpunkt"
|
|
#define UI_TEXT_DISABLE_STEPPER "Motoren Aussch."
|
|
#define UI_TEXT_X_POSITION "X Position"
|
|
#define UI_TEXT_X_POS_FAST "X Pos. Schnell"
|
|
#define UI_TEXT_Y_POSITION "Y Position"
|
|
#define UI_TEXT_Y_POS_FAST "Y Pos. Schnell"
|
|
#define UI_TEXT_Z_POSITION "Z Position"
|
|
#define UI_TEXT_Z_POS_FAST "Z Pos. Schnell"
|
|
#define UI_TEXT_E_POSITION "Extr. Position"
|
|
#define UI_TEXT_BED_TEMP "Bed Temp: %Eb" cDEG "C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1 : %E0" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2 : %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR2_TEMP "Temp. 3 : %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Extruder 1 Aus"
|
|
#define UI_TEXT_EXTR1_OFF "Extruder 2 Aus"
|
|
#define UI_TEXT_EXTR2_OFF "Extruder 3 Aus"
|
|
#define UI_TEXT_EXTR0_SELECT "W" STR_auml "hle Extr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "W" STR_auml "hle Extr. 2"
|
|
#define UI_TEXT_EXTR2_SELECT "W" STR_auml "hle Extr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "Setze Nullpunkt"
|
|
#define UI_TEXT_PRINT_X "Drucken X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Drucken Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Drucken Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Drucken:%az"
|
|
#define UI_TEXT_MOVE_X "Bewegen X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Bewegen Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Bewegen Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Bewegen:%aZ"
|
|
#define UI_TEXT_JERK "Ruck :%aj"
|
|
#define UI_TEXT_ZJERK "Z-Ruck :%aJ"
|
|
#define UI_TEXT_ACCELERATION "Beschleunigung"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Sichere EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Lade vom EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Fehler :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Trockenlauf:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Aus"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Klassisch"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Schnell"
|
|
#define UI_TEXT_OPS_RETRACT "Einfahren :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.Abst. :%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Start nach:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti Ooze"
|
|
#define UI_TEXT_PRINT_FILE "Drucke Datei"
|
|
#define UI_TEXT_PAUSE_PRINT "Druck Pausieren"
|
|
#define UI_TEXT_CONTINUE_PRINT "Druck Forts."
|
|
#define UI_TEXT_UNMOUNT_CARD "Unmount Karte"
|
|
#define UI_TEXT_MOUNT_CARD "Mount Karte"
|
|
#define UI_TEXT_DELETE_FILE "Datei l" STR_ouml "schen"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Home X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Home Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Home Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Home:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min Endstopp:%sx","Max Endstopp:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min Endstopp:%sy","Max Endstopp:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min Endstopp:%sz","Max Endstopp:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min Endstopp:%sx","Max Endstopp:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min Endstopp:%sy","Max Endstopp:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min Endstopp:%sz","Max Endstopp:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 klick = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "L" STR_uuml "fter"
|
|
#define UI_TEXT_ACTION_FANSPEED "L" STR_uuml "fter:%Fs%%%"
|
|
#define UI_TEXT_FAN_OFF "L" STR_uuml "fter Aus"
|
|
#define UI_TEXT_FAN_25 "L" STR_uuml "fter auf 25%%%"
|
|
#define UI_TEXT_FAN_50 "L" STR_uuml "fter auf 50%%%"
|
|
#define UI_TEXT_FAN_75 "L" STR_uuml "fter auf 75%%%"
|
|
#define UI_TEXT_FAN_FULL "L" STR_uuml "fter Voll"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Motor Inaktiv"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Aus nach:%is","[s] 0=Aus"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. Inaktiv"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Aus nach:%ip","[s] 0=Aus"
|
|
#define UI_TEXT_GENERAL "Allgemein"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Schr/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Beschl.:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab.Zeit:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Regler:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Aktion:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Heize Extruder"
|
|
#define UI_TEXT_HEATING_BED "Heize Druckbett"
|
|
#define UI_TEXT_KILLED "Angehalten"
|
|
#define UI_TEXT_STEPPER_DISABLED "Motoren Aus"
|
|
#define UI_TEXT_EEPROM_STORED "Konfiguration","gespeichert."
|
|
#define UI_TEXT_EEPROM_LOADED "Konfiguration","geladen."
|
|
#define UI_TEXT_UPLOADING "Hochladen..."
|
|
#define UI_TEXT_PAGE_BUFFER "Puffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Geschw.Mul:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Flow Mul.:%of%%%"
|
|
#define UI_TEXT_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_SHOW_MEASUREMENT "Zeige Messung"
|
|
#define UI_TEXT_RESET_MEASUREMENT "Reset Messung"
|
|
#define UI_TEXT_SET_MEASURED_ORIGIN "Setze Z=0"
|
|
#define UI_TEXT_ZCALIB "Z Calib."
|
|
#define UI_TEXT_SET_P1 "Setze P1"
|
|
#define UI_TEXT_SET_P2 "Setze P2"
|
|
#define UI_TEXT_SET_P3 "Setze P3"
|
|
#define UI_TEXT_CALCULATE_LEVELING "Berechne Leveling"
|
|
#define UI_TEXT_LEVEL "Level delta"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Wait Temp.%XT" cDEG "C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Wait Units:%XUmm"
|
|
#define UI_TEXT_SD_REMOVED "Karte entfernt"
|
|
#define UI_TEXT_SD_INSERTED "Karte eingelegt"
|
|
#define UI_TEXT_PRINTER_READY "\007 %PN bereit."
|
|
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
|
|
// ___88 days 12:45
|
|
#define UI_TEXT_PRINTTIME_DAYS " Tage "
|
|
#define UI_TEXT_PRINTTIME_HOURS ":"
|
|
#define UI_TEXT_PRINTTIME_MINUTES ""
|
|
#define UI_TEXT_PRINT_TIME "Ges. Druckzeit"
|
|
#define UI_TEXT_PRINT_FILAMENT "Filament gedruckt"
|
|
#define UI_TEXT_PRINTED "gedruckt"
|
|
#define UI_TEXT_POWER "ATX Netzteil an/aus"
|
|
#define UI_TEXT_STRING_HM_DEADTIME "Totzeit"
|
|
#define UI_TEXT_STRING_HM_SLOWBANG "Langs.BB"
|
|
#define UI_TEXT_STOP_PRINT "Druck abbrechen"
|
|
#define UI_TEXT_Z_BABYSTEPPING "Z Babyschritte"
|
|
#define UI_TEXT_CHANGE_FILAMENT "Filamentwechsel"
|
|
#define UI_TEXT_WIZ_CH_FILAMENT1 "Filamentwechsel:"
|
|
#define UI_TEXT_WIZ_CH_FILAMENT2 "Zum man. f" STR_ouml "rdern"
|
|
#define UI_TEXT_WIZ_CH_FILAMENT3 "Men" STR_uuml "knopf drehen"
|
|
#define UI_TEXT_CLICK_DONE "Weiter mit Klick"
|
|
|
|
#endif
|
|
|
|
// Dutch translation
|
|
#if UI_LANGUAGE==2
|
|
|
|
#define UI_TEXT_ON "Aan"
|
|
#define UI_TEXT_OFF "Uit"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Ja"
|
|
#define UI_TEXT_NO "Nee"
|
|
#define UI_TEXT_SEL cSEL
|
|
#define UI_TEXT_NOSEL cUNSEL
|
|
#define UI_TEXT_PRINT_POS "Printen..."
|
|
#define UI_TEXT_PRINTING "Printen"
|
|
#define UI_TEXT_IDLE "Rust"
|
|
#define UI_TEXT_NOSDCARD "Geen SD Kaart"
|
|
#define UI_TEXT_ERROR "**** FOUT ****"
|
|
#define UI_TEXT_BACK "Terug " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Snel Instelling"
|
|
#define UI_TEXT_CONFIGURATION "Configuratie"
|
|
#define UI_TEXT_POSITION "Positie"
|
|
#define UI_TEXT_EXTRUDER "Extruder"
|
|
#define UI_TEXT_SD_CARD "SD Kaart"
|
|
#define UI_TEXT_DEBUGGING "Debugging"
|
|
#define UI_TEXT_HOME_ALL "Home Alles"
|
|
#define UI_TEXT_HOME_X "Home X"
|
|
#define UI_TEXT_HOME_Y "Home Y"
|
|
#define UI_TEXT_HOME_Z "Home Z"
|
|
#define UI_TEXT_PREHEAT "Voorverwarmen"
|
|
#define UI_TEXT_COOLDOWN "Koelen"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Zet oorsprong"
|
|
#define UI_TEXT_DISABLE_STEPPER "Zet motor uit"
|
|
#define UI_TEXT_X_POSITION "X Positie"
|
|
#define UI_TEXT_X_POS_FAST "X Pos. Snel"
|
|
#define UI_TEXT_Y_POSITION "Y Positie"
|
|
#define UI_TEXT_Y_POS_FAST "Y Pos. Snel"
|
|
#define UI_TEXT_Z_POSITION "Z Positie"
|
|
#define UI_TEXT_Z_POS_FAST "Z Pos. Snel"
|
|
#define UI_TEXT_E_POSITION "Extr. positie"
|
|
#define UI_TEXT_BED_TEMP "Bed Temp: %Eb" cDEG "C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1: %E0" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2: %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR2_TEMP "Temp. 3: %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Extruder 1 Uit"
|
|
#define UI_TEXT_EXTR1_OFF "Extruder 2 Uit"
|
|
#define UI_TEXT_EXTR2_OFF "Extruder 3 Uit"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Select Extr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Select Extr. 2"
|
|
#define UI_TEXT_EXTR2_SELECT "%X2 Select Extr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "Zet oorsprong"
|
|
#define UI_TEXT_PRINT_X "Print X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Print Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Print Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Print:%az"
|
|
#define UI_TEXT_MOVE_X "Beweeg X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Beweeg Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Beweeg Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Beweeg:%aZ"
|
|
#define UI_TEXT_JERK "Ruk:%aj"
|
|
#define UI_TEXT_ZJERK "Z-Ruk:%aJ"
|
|
#define UI_TEXT_ACCELERATION "Acceleratie"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Opslaan n. EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Ladd f. EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Fouten :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Droogloop:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Uit"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Klassiek"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Snel"
|
|
#define UI_TEXT_OPS_RETRACT "Terugtrekken:%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min. afstand:%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Beweeg na:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti lekken"
|
|
#define UI_TEXT_PRINT_FILE "Print bestand"
|
|
#define UI_TEXT_PAUSE_PRINT "Pauzeer Print"
|
|
#define UI_TEXT_CONTINUE_PRINT "Zet print voort"
|
|
#define UI_TEXT_UNMOUNT_CARD "Ontkoppel Kaart"
|
|
#define UI_TEXT_MOUNT_CARD "Koppel Kaart"
|
|
#define UI_TEXT_DELETE_FILE "Verw. bestand"
|
|
#define UI_TEXT_FEEDRATE "Beweeg snelheid"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Home X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Home Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Home Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Home:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min eindst.:%sx","Max eindst.:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min eindst.:%sy","Max eindst.:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min eindst.:%sz","Max eindst.:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min eindst.:%sx","Max eindst.:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min eindst.:%sy","Max eindst.:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min eindst.:%sz","Max eindst.:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 klik = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Fan snelheid"
|
|
#define UI_TEXT_FAN_OFF "Zet Fan uit"
|
|
#define UI_TEXT_FAN_25 "Zet Fan 25%%%"
|
|
#define UI_TEXT_FAN_50 "Zet Fan 50%%%"
|
|
#define UI_TEXT_FAN_75 "Zet Fan 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Zet Fan Vol aan"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Motor Inactief"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Uit na:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. Inactief"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Zet uit na:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "Algemeen"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Stappen/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR.:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR.:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Accel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab.Tijd:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Control:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Action:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Opwarmen Extru."
|
|
#define UI_TEXT_HEATING_BED "Opwarmen Bed"
|
|
#define UI_TEXT_KILLED "Uitgeschakeld"
|
|
#define UI_TEXT_STEPPER_DISABLED "Motor uitgezet"
|
|
#define UI_TEXT_EEPROM_STORED "Configuratie","saved. in EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Configuratie","loaded f. EEPROM"
|
|
#define UI_TEXT_UPLOADING "Uploaden..."
|
|
#define UI_TEXT_PAGE_BUFFER "Buffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Snelh. Mul.:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Flow Mul.:%of%%%"
|
|
|
|
#endif
|
|
|
|
// *************** Brazilian portuguese translation ****************
|
|
|
|
#if UI_LANGUAGE==3
|
|
|
|
#define UI_TEXT_ON "On"
|
|
#define UI_TEXT_OFF "Off"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Sim"
|
|
#define UI_TEXT_NO "Não"
|
|
#define UI_TEXT_SEL cSEL
|
|
#define UI_TEXT_NOSEL cUNSEL
|
|
#define UI_TEXT_PRINT_POS "Imprimindo..."
|
|
#define UI_TEXT_PRINTING "Imprimindo"
|
|
#define UI_TEXT_IDLE "Ocioso"
|
|
#define UI_TEXT_NOSDCARD "Nenhum cartao SD"
|
|
#define UI_TEXT_ERROR "**** ERRO ****"
|
|
#define UI_TEXT_BACK "Voltar " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Configuracoes Rapidas"
|
|
#define UI_TEXT_CONFIGURATION "Configuracao"
|
|
#define UI_TEXT_POSITION "Posicao"
|
|
#define UI_TEXT_EXTRUDER "Extrusor"
|
|
#define UI_TEXT_SD_CARD "Cartao SD"
|
|
#define UI_TEXT_DEBUGGING "Depuracao"
|
|
#define UI_TEXT_HOME_ALL "Home Todos"
|
|
#define UI_TEXT_HOME_X "Home X"
|
|
#define UI_TEXT_HOME_Y "Home Y"
|
|
#define UI_TEXT_HOME_Z "Home Z"
|
|
#define UI_TEXT_PREHEAT_PLA "Pre-aquecer PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Pre-aquecer ABS"
|
|
#define UI_TEXT_COOLDOWN "Resfriar"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Definir como Origem"
|
|
#define UI_TEXT_DISABLE_STEPPER "Desabilitar motor"
|
|
#define UI_TEXT_X_POSITION "Posicao X"
|
|
#define UI_TEXT_X_POS_FAST "Pos. Rapida X"
|
|
#define UI_TEXT_Y_POSITION "Posicao Y"
|
|
#define UI_TEXT_Y_POS_FAST "Pos. Rapida Y"
|
|
#define UI_TEXT_Z_POSITION "Posicao Z"
|
|
#define UI_TEXT_Z_POS_FAST "Pos. Rapida Z"
|
|
#define UI_TEXT_E_POSITION "Posicao Extrusor"
|
|
#define UI_TEXT_BED_TEMP "Temp. Cama: %Eb" cDEG "C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1: %E0" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2: %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR2_TEMP "Temp. 3: %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Extrusor 1 Desligado"
|
|
#define UI_TEXT_EXTR1_OFF "Extrusor 2 Desligado"
|
|
#define UI_TEXT_EXTR2_OFF "Extrusor 3 Desligado"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Selecionar Extr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Selecionar Extr. 2"
|
|
#define UI_TEXT_EXTR2_SELECT "%X2 Selecionar Extr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "Definir Origem"
|
|
#define UI_TEXT_PRINT_X "Imprimir X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Imprimir Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Imprimir Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Imprimir:%az"
|
|
#define UI_TEXT_MOVE_X "Mover X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Mover Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Mover Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Mover:%aZ"
|
|
#define UI_TEXT_JERK "Jerk:%aj"
|
|
#define UI_TEXT_ZJERK "Z-Jerk:%aJ"
|
|
#define UI_TEXT_ACCELERATION "Aceleracao"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Armazenar na EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Carregar da EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Erros :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Dry run:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Off"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Classic"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Fast"
|
|
#define UI_TEXT_OPS_RETRACT "Retract :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.dist:%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Move after:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti Ooze"
|
|
#define UI_TEXT_PRINT_FILE "Imprimir arquivo"
|
|
#define UI_TEXT_PAUSE_PRINT "Pausar Impressao"
|
|
#define UI_TEXT_CONTINUE_PRINT "Continuar Impressao"
|
|
#define UI_TEXT_UNMOUNT_CARD "Desmontar Cartao"
|
|
#define UI_TEXT_MOUNT_CARD "Montar Cartao"
|
|
#define UI_TEXT_DELETE_FILE "Deletar arquivo"
|
|
#define UI_TEXT_FEEDRATE "Feedrate"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Home X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Home Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Home Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Home:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min endstop:%sx","Max endstop:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min endstop:%sy","Max endstop:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min endstop:%sz","Max endstop:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min endstop:%sx","Max endstop:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min endstop:%sy","Max endstop:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min endstop:%sz","Max endstop:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 click = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Velocidade ventoinha"
|
|
#define UI_TEXT_FAN_OFF "Desligar ventoinha"
|
|
#define UI_TEXT_FAN_25 "Def. ventoinha 25%%%"
|
|
#define UI_TEXT_FAN_50 "Def. ventoinha 50%%%"
|
|
#define UI_TEXT_FAN_75 "Def. ventoinha 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Def. ventoinha 100%%%"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Motor Inativo"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Des. Depois:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. Inativo"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Des. Depois:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "Geral"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Passos/mm:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Iniciar FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Accel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab.Time:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Controle:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "Offset X:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Offset Y:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Acao:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Aquecendo Extrusor"
|
|
#define UI_TEXT_HEATING_BED "Aquecendo Cama"
|
|
#define UI_TEXT_KILLED "Killed"
|
|
#define UI_TEXT_STEPPER_DISABLED "Motor Desabilitado"
|
|
#define UI_TEXT_EEPROM_STORED "Configuracao","armazenada na EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Configuracao","carregada da EEPROM"
|
|
#define UI_TEXT_UPLOADING "Enviando..."
|
|
#define UI_TEXT_PAGE_BUFFER "Buffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Mult. Veloc.:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Mult. Fluxo:%of%%%"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Aguardar Temp.%XT" cDEG "C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Aguardar Unidades:%XUmm"
|
|
#define UI_TEXT_PRINTER_READY "Impressora pronta."
|
|
|
|
#endif
|
|
|
|
// *************** Italian translation ****************
|
|
#if UI_LANGUAGE==4
|
|
|
|
#define UI_TEXT_ON "On"
|
|
#define UI_TEXT_OFF "Off"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Si"
|
|
#define UI_TEXT_NO "No"
|
|
#define UI_TEXT_SEL cSEL
|
|
#define UI_TEXT_NOSEL cUNSEL
|
|
#define UI_TEXT_PRINT_POS "Stampa..."
|
|
#define UI_TEXT_PRINTING "Stampa"
|
|
#define UI_TEXT_IDLE "Pausa"
|
|
#define UI_TEXT_NOSDCARD "No Scheda SD"
|
|
#define UI_TEXT_ERROR "**** ERRORE ****"
|
|
#define UI_TEXT_BACK "Indietro " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Impostazioni veloci"
|
|
#define UI_TEXT_CONFIGURATION "Configurazione"
|
|
#define UI_TEXT_POSITION "Posizione"
|
|
#define UI_TEXT_EXTRUDER "Estrusore"
|
|
#define UI_TEXT_SD_CARD "Scheda SD"
|
|
#define UI_TEXT_DEBUGGING "Sviluppo"
|
|
#define UI_TEXT_HOME_ALL "Origine Tutti"
|
|
#define UI_TEXT_HOME_X "Origine X"
|
|
#define UI_TEXT_HOME_Y "Origine Y"
|
|
#define UI_TEXT_HOME_Z "Origine Z"
|
|
#define UI_TEXT_PREHEAT_PLA "Presicaldamento PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Presicaldamento ABS"
|
|
#define UI_TEXT_COOLDOWN "Raffreddamento"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Imposta come Origine"
|
|
#define UI_TEXT_DISABLE_STEPPER "Disabilita stepper"
|
|
#define UI_TEXT_X_POSITION "Posizione X"
|
|
#define UI_TEXT_X_POS_FAST "Pos. X Veloce"
|
|
#define UI_TEXT_Y_POSITION "Posizione Y"
|
|
#define UI_TEXT_Y_POS_FAST "Pos. Y Veloce"
|
|
#define UI_TEXT_Z_POSITION "Posizione Z"
|
|
#define UI_TEXT_Z_POS_FAST "Pos. Z Veloce"
|
|
#define UI_TEXT_E_POSITION "Posizione Estrusore"
|
|
#define UI_TEXT_BED_TEMP "Temp. Piatto:%Eb" cDEG "C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1: %E0" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2: %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR2_TEMP "Temp. 3: %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Estrusore 1 Spento"
|
|
#define UI_TEXT_EXTR1_OFF "Estrusore 2 Spento"
|
|
#define UI_TEXT_EXTR2_OFF "Estrusore 3 Spento"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Seleziona Estr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Seleziona Estr. 2"
|
|
#define UI_TEXT_EXTR2_SELECT "%X2 Seleziona Estr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "Imposta Origine"
|
|
#define UI_TEXT_PRINT_X "Stampa X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Stampa Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Stampa Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Stampa:%az"
|
|
#define UI_TEXT_MOVE_X "Movimento X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Movimento Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Movimento Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Movimento:%aZ"
|
|
#define UI_TEXT_JERK "Scatto:%aj"
|
|
#define UI_TEXT_ZJERK "Scatto-Z:%aJ"
|
|
#define UI_TEXT_ACCELERATION "Accelerazione"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Salva in EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Carica da EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Eco :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Errori :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Simulazione:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Spento"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Classico"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Veloce"
|
|
#define UI_TEXT_OPS_RETRACT "Ritiro :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Gioco barra:%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Distanza Min.:%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Movimento dopo:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti goccia"
|
|
#define UI_TEXT_PRINT_FILE "Stampa file"
|
|
#define UI_TEXT_PAUSE_PRINT "Pausa Stampa"
|
|
#define UI_TEXT_CONTINUE_PRINT "Continua Stampa"
|
|
#define UI_TEXT_UNMOUNT_CARD "Scarica Scheda"
|
|
#define UI_TEXT_MOUNT_CARD "Carica Scheda"
|
|
#define UI_TEXT_DELETE_FILE "Cancella file"
|
|
#define UI_TEXT_FEEDRATE "Velocita'"
|
|
#define UI_TEXT_FEED_MAX_X "Massimo X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Massimo Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Massimo Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Massimo:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Origine X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Origine Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Origine Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Origine:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min finec.:%sx","Max finec.:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min finec.:%sy","Max finec.:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min finec.:%sz","Max finec.:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min finec.:%sx","Max finec.:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min finec.:%sy","Max finec.:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min finec.:%sz","Max finec.:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 scatto = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Velocita' Ventola"
|
|
#define UI_TEXT_FAN_OFF "Spegnimento Ventola"
|
|
#define UI_TEXT_FAN_25 "Ventola al 25%%%"
|
|
#define UI_TEXT_FAN_50 "Ventola al%%%"
|
|
#define UI_TEXT_FAN_75 "Ventola al%%%"
|
|
#define UI_TEXT_FAN_FULL "Ventola al massimo"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Stepper Inattivi"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Dis. dopo:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. Inattivita'"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Dis. After:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "Generale"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Passi/mm:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Velocita' Avvio:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Velocita' Max:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Accel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Tempo Stab.:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Avanzamento lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Avanzamento espon:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Controllo:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Azione:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Riscald. Estrusore"
|
|
#define UI_TEXT_HEATING_BED "Riscald. Piatto"
|
|
#define UI_TEXT_KILLED "Abortito"
|
|
#define UI_TEXT_STEPPER_DISABLED "Stepper Disabilitato"
|
|
#define UI_TEXT_EEPROM_STORED "Configurazione","Salvata in EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Configurazione","Caricata da EEPROM"
|
|
#define UI_TEXT_UPLOADING "Caricamento..."
|
|
#define UI_TEXT_PAGE_BUFFER "Tampone:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Molt. Velocita':%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Molt. Flusso:%of%%%"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Attesa Temp.%XT" cDEG "C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Attesa Unita':%XUmm"
|
|
#define UI_TEXT_PRINTER_READY "Stampante pronta."
|
|
|
|
#endif
|
|
|
|
#if UI_LANGUAGE==5 // Spanish translation
|
|
|
|
#define UI_TEXT_ON "On"
|
|
#define UI_TEXT_OFF "Off"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Si"
|
|
#define UI_TEXT_NO "No"
|
|
#define UI_TEXT_SEL cSEL
|
|
#define UI_TEXT_NOSEL cUNSEL
|
|
#define UI_TEXT_PRINT_POS "Imprimiendo..."
|
|
#define UI_TEXT_PRINTING "Imprimiendo"
|
|
#define UI_TEXT_IDLE "Idle"
|
|
#define UI_TEXT_NOSDCARD "Sin tarjeta SD"
|
|
#define UI_TEXT_ERROR "**** ERROR ****"
|
|
#define UI_TEXT_BACK "Atras " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Configuracion Rapida"
|
|
#define UI_TEXT_CONFIGURATION "Configuracion"
|
|
#define UI_TEXT_POSITION "Posicion"
|
|
#define UI_TEXT_EXTRUDER "Extrusor"
|
|
#define UI_TEXT_SD_CARD "Tarjeta SD"
|
|
#define UI_TEXT_DEBUGGING "Debugging"
|
|
#define UI_TEXT_HOME_ALL "Todo Home"
|
|
#define UI_TEXT_HOME_X "X Home"
|
|
#define UI_TEXT_HOME_Y "Y Home"
|
|
#define UI_TEXT_HOME_Z "Z Home"
|
|
#define UI_TEXT_PREHEAT_PLA "Precalentar PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Precalentar ABS"
|
|
#define UI_TEXT_COOLDOWN "Enfriar"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Fija a origen"
|
|
#define UI_TEXT_DISABLE_STEPPER "Desactiva motor"
|
|
#define UI_TEXT_X_POSITION "Posicion X"
|
|
#define UI_TEXT_X_POS_FAST "Pos. Rapida X"
|
|
#define UI_TEXT_Y_POSITION "Posicion Y"
|
|
#define UI_TEXT_Y_POS_FAST "Pos. Rapida Y"
|
|
#define UI_TEXT_Z_POSITION "Posicion Z"
|
|
#define UI_TEXT_Z_POS_FAST "Pos. Rapida Z"
|
|
#define UI_TEXT_E_POSITION "Extr. Posicion"
|
|
#define UI_TEXT_BED_TEMP "Temp. Cama: %Eb" cDEG "C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1 : %E0" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2 : %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 3 : %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Extrusor 1 Off"
|
|
#define UI_TEXT_EXTR1_OFF "Extrusor 2 Off"
|
|
#define UI_TEXT_EXTR2_OFF "Extrusor 3 Off"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Select Extr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Select Extr. 2"
|
|
#define UI_TEXT_EXTR2_SELECT "%X2 Select Extr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "Fija Originen"
|
|
#define UI_TEXT_PRINT_X "Print X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Print Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Print Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Print:%az"
|
|
#define UI_TEXT_MOVE_X "Mueve X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Mueve Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Mueve Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Mueve:%aZ"
|
|
#define UI_TEXT_JERK "Jerk:%aj"
|
|
#define UI_TEXT_ZJERK "Z-Jerk:%aJ"
|
|
#define UI_TEXT_ACCELERATION "Aceleracion"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Almacena en EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Carga de EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Errors :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Ejecucion vacio:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Off"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Classica"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Rapida"
|
|
#define UI_TEXT_OPS_RETRACT "Retraccion :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.dist:%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Move after:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti Ooze"
|
|
#define UI_TEXT_PRINT_FILE "Imprimiendo fichero"
|
|
#define UI_TEXT_PAUSE_PRINT "Pausando impresion"
|
|
#define UI_TEXT_CONTINUE_PRINT "Continuando impresion"
|
|
#define UI_TEXT_UNMOUNT_CARD "Desmontando Tarjeta"
|
|
#define UI_TEXT_MOUNT_CARD "Montando Card"
|
|
#define UI_TEXT_DELETE_FILE "Borrando fichero"
|
|
#define UI_TEXT_FEEDRATE "Feedrate"
|
|
#define UI_TEXT_FEED_MAX_X "X Max:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Y Max:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Z Max:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "X Home:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Y Home:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Z Home:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Home:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Fin Carrera Min:%sx","Max:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Fin Carrera Min:%sy","Max:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Fin Carrera Min:%sz","Max:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Fin Carrera Min:%sx","Max:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Fin Carrera Min:%sy","Max:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Fin Carrera Min:%sz","Max:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 click = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Velocida ventilador"
|
|
#define UI_TEXT_FAN_OFF "Apaga ventilador"
|
|
#define UI_TEXT_FAN_25 "Ventilador al 25%%%"
|
|
#define UI_TEXT_FAN_50 "Ventilador al 50%%%"
|
|
#define UI_TEXT_FAN_75 "Ventilador al 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Ventilador al 100%%%"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Motor Inactivo"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Dis. Despues:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. Inactivo"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Dis. Despues:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "General"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Pasos/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Acel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Tiempo Estab.:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Control:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Accion:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Calentando Extrusor"
|
|
#define UI_TEXT_HEATING_BED "Calentando Cama"
|
|
#define UI_TEXT_KILLED "Aborta"
|
|
#define UI_TEXT_STEPPER_DISABLED "Deshabilita motor"
|
|
#define UI_TEXT_EEPROM_STORED "Config.","almacenada en EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Config.","cargada de EEPROM"
|
|
#define UI_TEXT_UPLOADING "Actualizando..."
|
|
#define UI_TEXT_PAGE_BUFFER "Buffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Mult. Velocidad.:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Mult. Flujo.:%of%%%"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Esperando Temp.%XT" cDEG "C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Esperando Unidad:%XUmm"
|
|
#define UI_TEXT_PRINTER_READY "Impresora Lista."
|
|
|
|
#endif
|
|
|
|
// *************** Swedish translation ****************
|
|
// By Daniel Tedenljung 2013-08-21
|
|
#if UI_LANGUAGE==6
|
|
#define UI_TEXT_ON "P" STR_uuml ""
|
|
#define UI_TEXT_OFF "Av"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Ja"
|
|
#define UI_TEXT_NO "Nej"
|
|
#define UI_TEXT_SEL cSEL
|
|
#define UI_TEXT_NOSEL cUNSEL
|
|
#define UI_TEXT_PRINT_POS "Skriver ut..."
|
|
#define UI_TEXT_PRINTING "Skriver"
|
|
#define UI_TEXT_IDLE "Sysslol" STR_ouml "s"
|
|
#define UI_TEXT_NOSDCARD "Inget SD-kort"
|
|
#define UI_TEXT_ERROR "**** FEL ****"
|
|
#define UI_TEXT_BACK "Tillbaka " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Inst" STR_auml "llnigar"
|
|
#define UI_TEXT_CONFIGURATION "Konfiguration"
|
|
#define UI_TEXT_POSITION "Position"
|
|
#define UI_TEXT_EXTRUDER "Extruder"
|
|
#define UI_TEXT_SD_CARD "SD-kort"
|
|
#define UI_TEXT_DEBUGGING "Debugging"
|
|
#define UI_TEXT_HOME_ALL "K" STR_ouml "r hem alla"
|
|
#define UI_TEXT_HOME_X "K" STR_ouml "r hem X"
|
|
#define UI_TEXT_HOME_Y "K" STR_ouml "r hem Y"
|
|
#define UI_TEXT_HOME_Z "K" STR_ouml "r hem Z"
|
|
#define UI_TEXT_PREHEAT_PLA "F" STR_ouml "rv" STR_auml "rm f" STR_ouml "r PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "F" STR_ouml "rv" STR_auml "rm f" STR_ouml "r ABS"
|
|
#define UI_TEXT_COOLDOWN "Kyl ner"
|
|
#define UI_TEXT_SET_TO_ORIGIN "S" STR_auml "tt som origo"
|
|
#define UI_TEXT_DISABLE_STEPPER "St" STR_auml "ng av stegmotor"
|
|
#define UI_TEXT_X_POSITION "X-position"
|
|
#define UI_TEXT_X_POS_FAST "X-pos. snabb"
|
|
#define UI_TEXT_Y_POSITION "Y-position"
|
|
#define UI_TEXT_Y_POS_FAST "Y-pos. snabb"
|
|
#define UI_TEXT_Z_POSITION "Z-osition"
|
|
#define UI_TEXT_Z_POS_FAST "Z-pos. snabb"
|
|
#define UI_TEXT_E_POSITION "Extr.-position"
|
|
#define UI_TEXT_BED_TEMP "B" STR_auml "dd-temp: %Eb" cDEG "C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1: %E0" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2: %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 3: %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Extruder 1 av"
|
|
#define UI_TEXT_EXTR1_OFF "Extruder 2 av"
|
|
#define UI_TEXT_EXTR3_OFF "Extruder 3 av"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 V"STR_auml"lj Extr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 V"STR_auml"lj Extr. 2"
|
|
#define UI_TEXT_EXTR3_SELECT "%X2 V"STR_auml"lj Extr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "S" STR_auml "tt origo"
|
|
#define UI_TEXT_PRINT_X "Skriv X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Skriv Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Skriv Z:%az"
|
|
#define UI_TEXT_MOVE_X "Transp. X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Transp. Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Transp. Z:%aZ"
|
|
#define UI_TEXT_JERK "Ryck: %aj"
|
|
#define UI_TEXT_ZJERK "Z-ryck: %aJ"
|
|
#define UI_TEXT_ACCELERATION "Acceleration"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Spara till EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Ladda f. EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Eko: %do"
|
|
#define UI_TEXT_DBG_INFO "Info: %di"
|
|
#define UI_TEXT_DBG_ERROR "Errors: %de"
|
|
#define UI_TEXT_DBG_DRYRUN "Torrk" STR_ouml "r:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O1 OPS av"
|
|
#define UI_TEXT_OPS_CLASSIC "%O2 OPS klassisk"
|
|
#define UI_TEXT_OPS_FAST "%O3 OPS snabb"
|
|
#define UI_TEXT_OPS_RETRACT "Backa: %Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.dist: %Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Flytta efter:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Antikladd"
|
|
#define UI_TEXT_PRINT_FILE "Skriv ut fil"
|
|
#define UI_TEXT_PAUSE_PRINT "Pausa utskrift"
|
|
#define UI_TEXT_CONTINUE_PRINT "Forts" STR_auml "tt utskrift"
|
|
#define UI_TEXT_UNMOUNT_CARD "Mata ut kort"
|
|
#define UI_TEXT_MOUNT_CARD "Anslut kort"
|
|
#define UI_TEXT_DELETE_FILE "Radera fil"
|
|
#define UI_TEXT_FEEDRATE "Matning"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Ref X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Ref Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Ref Z:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min " STR_auml "ndl" STR_auml "ge:%sx","Max " STR_auml "ndl" STR_auml "ge:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min " STR_auml "ndl" STR_auml "ge:%sy","Max " STR_auml "ndl" STR_auml "ge:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min " STR_auml "ndl" STR_auml "ge:%sz","Max " STR_auml "ndl" STR_auml "ge:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min " STR_auml "ndl" STR_auml "ge:%sx","Max " STR_auml "ndl" STR_auml "ge:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min " STR_auml "ndl" STR_auml "ge:%sy","Max " STR_auml "ndl" STR_auml "ge:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min " STR_auml "ndl" STR_auml "ge:%sz","Max " STR_auml "ndl" STR_auml "ge:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 click = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Fl" STR_auml "kt hast."
|
|
#define UI_TEXT_FAN_OFF "St" STR_auml "ng av fl" STR_auml "kt"
|
|
#define UI_TEXT_FAN_25 "Fl" STR_auml "kt 25%%%"
|
|
#define UI_TEXT_FAN_50 "Fl" STR_auml "kt 50%%%"
|
|
#define UI_TEXT_FAN_75 "Fl" STR_auml "kt 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Full fl" STR_auml "kt"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Stegmotorer inakt."
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Inakt. efter:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. inaktiv"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Inakt. efter:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "Generella"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Steg/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Accel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab. tid:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Control:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Aktion:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "V" STR_auml "rmer Extruder"
|
|
#define UI_TEXT_HEATING_BED "V" STR_auml "rmer B" STR_auml "dd"
|
|
#define UI_TEXT_KILLED "D" STR_ouml "dad"
|
|
#define UI_TEXT_STEPPER_DISABLED "Stegmotorer av"
|
|
#define UI_TEXT_EEPROM_STORED "Konfiguration","sparad i EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Konfiguration","laddat fr. EEPROM"
|
|
#define UI_TEXT_UPLOADING "Uppladdning..."
|
|
#define UI_TEXT_PAGE_BUFFER "Buffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Hast. Mul.:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Fl" STR_ouml "de Mul.:%of%%%"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Inv" STR_auml "nta temp.%XT" cDEG "C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Inv" STR_auml "nta pos:%XUmm"
|
|
#define UI_TEXT_PRINTER_READY "Utskrift klar."
|
|
#endif
|
|
|
|
// *************** French translation ****************
|
|
// *************** By Doudou ****************
|
|
#if UI_LANGUAGE==7
|
|
|
|
#define UI_TEXT_ON "On"
|
|
#define UI_TEXT_OFF "Off"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Oui"
|
|
#define UI_TEXT_NO "Non"
|
|
#define UI_TEXT_SEL "\003"
|
|
#define UI_TEXT_NOSEL "\004"
|
|
#define UI_TEXT_PRINT_POS "Impression..."
|
|
#define UI_TEXT_PRINTING "Impression"
|
|
#define UI_TEXT_IDLE "Au Repos"
|
|
#define UI_TEXT_NOSDCARD "Pas de Carte SD"
|
|
#define UI_TEXT_ERROR "**** ERREUR ****"
|
|
#define UI_TEXT_BACK "Retour \001"
|
|
#define UI_TEXT_QUICK_SETTINGS "Reglages Rapides"
|
|
#define UI_TEXT_CONFIGURATION "Configuration"
|
|
#define UI_TEXT_POSITION "Position"
|
|
#define UI_TEXT_ADJTEMPS "Ajuster Temp"
|
|
#define UI_TEXT_EXTRUDER "Extrudeuse"
|
|
#define UI_TEXT_SD_CARD "Carte SD"
|
|
#define UI_TEXT_DEBUGGING "Deboguer"
|
|
#define UI_TEXT_HOME_ALL "Accueil Tout"
|
|
#define UI_TEXT_HOME_X "Accueil X"
|
|
#define UI_TEXT_HOME_Y "Accueil Y"
|
|
#define UI_TEXT_HOME_Z "Accueil Z"
|
|
#define UI_TEXT_PREHEAT_PLA "Prechauf. PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Prechauf. ABS"
|
|
#define UI_TEXT_LIGHTS_ONOFF "Eclairage :%lo"
|
|
#define UI_TEXT_COOLDOWN "Refroidir"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Set to Origin"
|
|
#define UI_TEXT_DISABLE_STEPPER "Desactiv. Moteurs"
|
|
#define UI_TEXT_X_POSITION "Position X"
|
|
#define UI_TEXT_X_POS_FAST "Pos. Rapide X"
|
|
#define UI_TEXT_Y_POSITION "Position Y"
|
|
#define UI_TEXT_Y_POS_FAST "Pos. Rapide Y"
|
|
#define UI_TEXT_Z_POSITION "Position Z"
|
|
#define UI_TEXT_Z_POS_FAST "Pos. Rapide Z"
|
|
#define UI_TEXT_E_POSITION "Position Extr."
|
|
#define UI_TEXT_BED_TEMP "Lit Temp.: %Eb\002C"
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 1 : %E0\002C"
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 2 : %E1\002C"
|
|
#define UI_TEXT_EXTR2_TEMP "Temp. 2 : %E2\002C"
|
|
#define UI_TEXT_EXTR0_OFF "Extrudeuse 1 Off"
|
|
#define UI_TEXT_EXTR1_OFF "Extrudeuse 2 Off"
|
|
#define UI_TEXT_EXTR2_OFF "Extrudeuse 3 Off"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Select. Extr.0"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Select. Extr.1"
|
|
#define UI_TEXT_EXTR2_SELECT "%X1 Select. Extr.2"
|
|
#define UI_TEXT_EXTR_ORIGIN "Set Origin"
|
|
#define UI_TEXT_PRINT_X "Imprim. X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Imprim. Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Imprim. Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Imprim.:%az"
|
|
#define UI_TEXT_MOVE_X "Deplac. X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Deplac. Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Deplac. Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Deplac.:%aZ"
|
|
#define UI_TEXT_JERK "Jerk:%aj"
|
|
#define UI_TEXT_ZJERK "Z-Jerk:%aJ"
|
|
#define UI_TEXT_ACCELERATION "Acceleration"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Stock. Dans EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Charg. f. EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Erreurs :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Fonct. a Vide:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Off"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Classiq."
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Rapide"
|
|
#define UI_TEXT_OPS_RETRACT "Retract. :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.dist:%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Déplac. Apres:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti Ooze"
|
|
#define UI_TEXT_PRINT_FILE "Imprim. fichier"
|
|
#define UI_TEXT_PAUSE_PRINT "Pause Impress."
|
|
#define UI_TEXT_CONTINUE_PRINT "Continuer Impress."
|
|
#define UI_TEXT_UNMOUNT_CARD "Retirer Carte"
|
|
#define UI_TEXT_MOUNT_CARD "Inserer Carte"
|
|
#define UI_TEXT_DELETE_FILE "Supp. fichier"
|
|
#define UI_TEXT_FEEDRATE "Avance"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Accueil X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Accueil Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Accueil Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Accueil:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min Butee:%sx","Max Butee:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min Butee:%sy","Max Butee:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min Butee:%sz","Max Butee:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min Butee:%sx","Max Butee:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min Butee:%sy","Max Butee:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min Butee:%sz","Max Butee:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 clic = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Vit. Ventil."
|
|
#define UI_TEXT_ACTION_FANSPEED "Vit. Ventil.:%Fs%%%"
|
|
#define UI_TEXT_FAN_OFF "Arret Ventil."
|
|
#define UI_TEXT_FAN_25 "Ventil. 25%%%"
|
|
#define UI_TEXT_FAN_50 "Ventil. 50%%%"
|
|
#define UI_TEXT_FAN_75 "Ventil. 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Ventil. Max"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Arret Moteurs"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Dis. Apres:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Arret Alim."
|
|
#define UI_TEXT_POWER_INACTIVE2 "Dis. Apres:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "General"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Pas/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Accel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab.Temps:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Avance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Avance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Controle:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Action:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Chauff. Extrud."
|
|
#define UI_TEXT_HEATING_BED "Chauff. Lit"
|
|
#define UI_TEXT_KILLED "Stoppe"
|
|
#define UI_TEXT_STEPPER_DISABLED "Moteurs Arretes"
|
|
#define UI_TEXT_EEPROM_STORED "Configuration","Stock. Dans EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Configuration","Charg. f. EEPROM"
|
|
#define UI_TEXT_UPLOADING "Telechargement.."
|
|
#define UI_TEXT_PAGE_BUFFER "Tampon:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec\002C\176%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0\002C\176%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1\002C\176%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2\002C\176%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb\002C\176%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Vit. Mul.:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Flow Mul.:%of%%%"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Att. Temp.%XT\002C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Att. Units:%XUmm"
|
|
#define UI_TEXT_PRINTER_READY "imprimante prete"
|
|
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
|
|
// ___88 days 12:45
|
|
#define UI_TEXT_PRINTTIME_DAYS " jours "
|
|
#define UI_TEXT_PRINTTIME_HOURS ":"
|
|
#define UI_TEXT_PRINTTIME_MINUTES ""
|
|
#define UI_TEXT_PRINT_TIME "Temps Impression"
|
|
#define UI_TEXT_PRINT_FILAMENT "Filament Imprime"
|
|
#define UI_TEXT_PRINTED "Imprime"
|
|
#define UI_TEXT_POWER "ATX power on/off"
|
|
#define UI_TEXT_STRING_HM_DEADTIME "PWM"
|
|
#define UI_TEXT_STRING_HM_SLOWBANG "Tout ou Rien"
|
|
#define UI_TEXT_STOP_PRINT "Arret Impress."
|
|
|
|
#endif
|
|
|
|
// *************** Czech translation ****************
|
|
// *************** By Majkl ****************
|
|
// version: 2014/08/27
|
|
#if UI_LANGUAGE==8
|
|
|
|
#define UI_TEXT_ON "Zap"
|
|
#define UI_TEXT_OFF "Vyp"
|
|
#define UI_TEXT_NA "neni" // Output for not available
|
|
#define UI_TEXT_YES "Ano"
|
|
#define UI_TEXT_NO "Ne"
|
|
#define UI_TEXT_SEL "\003"
|
|
#define UI_TEXT_NOSEL "\004"
|
|
#define UI_TEXT_PRINT_POS "Tisknu..."
|
|
#define UI_TEXT_PRINTING "Tisknu"
|
|
#define UI_TEXT_IDLE "V klidu"
|
|
#define UI_TEXT_NOSDCARD "Neni SD karta"
|
|
#define UI_TEXT_ERROR "**** CHYBA ****"
|
|
#define UI_TEXT_BACK "Zpet \001"
|
|
#define UI_TEXT_QUICK_SETTINGS "Zakladni nastaveni"
|
|
#define UI_TEXT_CONFIGURATION "Nastaveni"
|
|
#define UI_TEXT_POSITION "Pozice"
|
|
#define UI_TEXT_EXTRUDER "Extruder"
|
|
#define UI_TEXT_SD_CARD "SD karta"
|
|
#define UI_TEXT_DEBUGGING "Debug"
|
|
#define UI_TEXT_HOME_ALL "Home vsech"
|
|
#define UI_TEXT_HOME_X "Home X"
|
|
#define UI_TEXT_HOME_Y "Home Y"
|
|
#define UI_TEXT_HOME_Z "Home Z"
|
|
#define UI_TEXT_PREHEAT_PLA "Ohrat pro PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Ohrat pro ABS"
|
|
#define UI_TEXT_COOLDOWN "Zchladit"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Nastavit pocatek"
|
|
#define UI_TEXT_DISABLE_STEPPER "Vypnout motory"
|
|
#define UI_TEXT_X_POSITION "X pozice"
|
|
#define UI_TEXT_X_POS_FAST "X rychle"
|
|
#define UI_TEXT_Y_POSITION "Y pozice"
|
|
#define UI_TEXT_Y_POS_FAST "Y rychle"
|
|
#define UI_TEXT_Z_POSITION "Z pozice"
|
|
#define UI_TEXT_Z_POS_FAST "Z rychle"
|
|
#define UI_TEXT_E_POSITION "Pozice extruderu"
|
|
#define UI_TEXT_BED_TEMP "Teplota desky: %Eb\002C"
|
|
#define UI_TEXT_EXTR0_TEMP "Teplota 1: %E0\002C"
|
|
#define UI_TEXT_EXTR1_TEMP "Teplota 2: %E1\002C"
|
|
#define UI_TEXT_EXTR2_TEMP "Teplota 2: %E2\002C"
|
|
#define UI_TEXT_EXTR0_OFF "Extruder 1 vyp."
|
|
#define UI_TEXT_EXTR1_OFF "Extruder 2 vyp."
|
|
#define UI_TEXT_EXTR2_OFF "Extruder 3 vyp."
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Zvolit Extr. 1"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Zvolit Extr. 2"
|
|
#define UI_TEXT_EXTR2_SELECT "%X1 Zvolit Extr. 3"
|
|
#define UI_TEXT_EXTR_ORIGIN "Nastavit pocatek"
|
|
#define UI_TEXT_PRINT_X "Tisk X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Tisk Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Tisk Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Tisk:%az"
|
|
#define UI_TEXT_MOVE_X "Posun X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Posun Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Posun Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Posun:%aZ"
|
|
#define UI_TEXT_JERK "Jerk:%aj"
|
|
#define UI_TEXT_ZJERK "Z-Jerk:%aJ"
|
|
#define UI_TEXT_ACCELERATION "Akcelerace"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Ulozit do EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Nahrat z EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Chyby :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Beh nanecisto:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Vypnuto"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Klasicke"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Rychle"
|
|
#define UI_TEXT_OPS_RETRACT "Retrakce :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Vule. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.vzd,:%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Posunuti po:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Proti kapani"
|
|
#define UI_TEXT_PRINT_FILE "Tisknout soubor"
|
|
#define UI_TEXT_PAUSE_PRINT "Pozastavit tisk"
|
|
#define UI_TEXT_CONTINUE_PRINT "Pokracovani tisku"
|
|
#define UI_TEXT_UNMOUNT_CARD "Odpojit kartu"
|
|
#define UI_TEXT_MOUNT_CARD "Pripojit kartu"
|
|
#define UI_TEXT_DELETE_FILE "Smazat soubor"
|
|
#define UI_TEXT_FEEDRATE "Rychlost"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Home X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Home Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Home Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Home:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min koncak:%sx","Max koncak:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min koncak:%sy","Max koncak:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min koncak:%sz","Max koncak:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min koncak:%sx","Max koncak:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min koncak:%sy","Max koncak:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min koncak:%sz","Max koncak:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 kliknuti = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Rychlost vetraku"
|
|
#define UI_TEXT_ACTION_FANSPEED "Aktualni rychlost:%Fs%%%"
|
|
#define UI_TEXT_FAN_OFF "Vypnout"
|
|
#define UI_TEXT_FAN_25 "Vetrak na 25%%%"
|
|
#define UI_TEXT_FAN_50 "Vetrak na 50%%%"
|
|
#define UI_TEXT_FAN_75 "Vetrak na 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Vetrak na plno"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Neaktivni motory"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Vypnout po:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. neaktivni"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Vypnout po:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "Zakladni"
|
|
#define UI_TEXT_BAUDRATE "Rychlost:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "kroku/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Zrychl.:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab.cas:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Rozsir. lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Rozsir. quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Control:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Akce:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Ohrivani extruderu"
|
|
#define UI_TEXT_HEATING_BED "Ohrivani desky"
|
|
#define UI_TEXT_KILLED "Zastaveno"
|
|
#define UI_TEXT_STEPPER_DISABLED "Motor vypnut"
|
|
#define UI_TEXT_EEPROM_STORED "Konfigurace","ulozena v EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Konfigurace","nactena z EEPROM"
|
|
#define UI_TEXT_UPLOADING "Nahravam..."
|
|
#define UI_TEXT_PAGE_BUFFER "Buffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec\002C\176%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0\002C\176%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1\002C\176%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2\002C\176%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb\002C\176%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Rychlost:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Extruder:%of%%%"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Tepl. cekani%XT\002C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Jedn. cekani:%XUmm"
|
|
#define UI_TEXT_PRINTER_READY "Tiskarna OK"
|
|
#define UI_TEXT_SD_REMOVED "SD karta vyjmuta."
|
|
#define UI_TEXT_SD_INSERTED "Vlozena SD karta"
|
|
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
|
|
// ___88 days 12:45
|
|
#define UI_TEXT_PRINTTIME_DAYS " dnu "
|
|
#define UI_TEXT_PRINTTIME_HOURS ":"
|
|
#define UI_TEXT_PRINTTIME_MINUTES ""
|
|
#define UI_TEXT_PRINT_TIME "Cas tisku"
|
|
#define UI_TEXT_PRINT_FILAMENT "Protisknuto"
|
|
#define UI_TEXT_PRINTED "Protisknuto"
|
|
#define UI_TEXT_POWER "Zapnout ATX zdroj"
|
|
#define UI_TEXT_STRING_HM_DEADTIME "Dead Time"
|
|
#define UI_TEXT_STRING_HM_SLOWBANG "SlowBang"
|
|
#define UI_TEXT_STOP_PRINT "Zastavit tisk"
|
|
|
|
#endif
|
|
|
|
// *************************************************************************************
|
|
// User defined language
|
|
//
|
|
// If you need a language not mentioned above, you can translate this dummy entry.
|
|
// If you want it added permanently to the distribution, spend it to the community under
|
|
// GPL V3. Only new and complete translations are put into the official distribution!
|
|
// *************************************************************************************
|
|
|
|
#if UI_LANGUAGE==1000
|
|
|
|
#define UI_TEXT_ON "On"
|
|
#define UI_TEXT_OFF "Off"
|
|
#define UI_TEXT_NA "N/A" // Output for not available
|
|
#define UI_TEXT_YES "Yes"
|
|
#define UI_TEXT_NO "No"
|
|
#define UI_TEXT_SEL cSEL
|
|
#define UI_TEXT_NOSEL cUNSEL
|
|
#define UI_TEXT_PRINT_POS "Percent Printed:"
|
|
#define UI_TEXT_PRINTING "Printing"
|
|
#if PRINTER == 1
|
|
#define UI_TEXT_IDLE "ORION Ready"
|
|
#elif PRINTER == 2
|
|
#define UI_TEXT_IDLE "RostockMAX Ready"
|
|
#elif PRINTER == 3
|
|
#define UI_TEXT_IDLE "ERIS Ready"
|
|
#elif PRINTER == 4
|
|
#define UI_TEXT_IDLE "DROPLIT Ready"
|
|
#elif PRINTER == 5
|
|
#define UI_TEXT_IDLE "RostockMAX Ready"
|
|
#else
|
|
#define UI_TEXT_IDLE "Printer Ready"
|
|
#endif
|
|
#define UI_TEXT_NOSDCARD "No SD Card"
|
|
#define UI_TEXT_ERROR "**** ERROR ****"
|
|
#define UI_TEXT_BACK "Previous Screen " cUP
|
|
#define UI_TEXT_QUICK_SETTINGS "Printer Settings"
|
|
#define UI_TEXT_CONFIGURATION "Advanced Settings"
|
|
#define UI_TEXT_POSITION "Position"
|
|
#define UI_TEXT_ADJTEMPS "Adjust Temps"
|
|
#define UI_TEXT_EXTRUDER "Extruder"
|
|
#define UI_TEXT_SD_CARD "SD Card Menu"
|
|
#define UI_TEXT_DEBUGGING "Debugging"
|
|
#define UI_TEXT_HOME_ALL "Home Printer"
|
|
#define UI_TEXT_AUTOLEVEL_FULL "Full Calibration"
|
|
#define UI_TEXT_HOME_X "Home X"
|
|
#define UI_TEXT_HOME_Y "Home Y"
|
|
#define UI_TEXT_HOME_Z "Home Z"
|
|
#define UI_TEXT_PREHEAT_PLA "Preheat PLA"
|
|
#define UI_TEXT_PREHEAT_ABS "Preheat ABS"
|
|
#define UI_TEXT_COOLDOWN "Shut Off ALL Heats"
|
|
#define UI_TEXT_SET_TO_ORIGIN "Set to Origin"
|
|
#define UI_TEXT_DISABLE_STEPPER "Disable Steppers"
|
|
#define UI_TEXT_X_POSITION "X Position"
|
|
#define UI_TEXT_X_POS_FAST "X Pos. Fast"
|
|
#define UI_TEXT_Y_POSITION "Y Position"
|
|
#define UI_TEXT_Y_POS_FAST "Y Pos. Fast"
|
|
#define UI_TEXT_Z_POSITION "Z Position"
|
|
#define UI_TEXT_Z_POS_FAST "Move Z Position"
|
|
#define UI_TEXT_E_POSITION "Extr. position"
|
|
#define UI_TEXT_BED_TEMP "BED Temp: %Eb" cDEG "C"
|
|
#if NUM_EXTRUDER == 2
|
|
#define UI_TEXT_EXTR0_TEMP "Temp. 0 : %E0" cDEG "C"
|
|
#else
|
|
#define UI_TEXT_EXTR0_TEMP "NOZ Temp: %E0" cDEG "C"
|
|
#endif
|
|
#define UI_TEXT_EXTR1_TEMP "Temp. 1 : %E1" cDEG "C"
|
|
#define UI_TEXT_EXTR2_TEMP "Temp. 2 : %E2" cDEG "C"
|
|
#define UI_TEXT_EXTR0_OFF "Shut Down Nozzle"
|
|
#define UI_TEXT_EXTR1_OFF "Extruder 1 Off"
|
|
#define UI_TEXT_EXTR2_OFF "Extruder 2 Off"
|
|
#define UI_TEXT_EXTR0_SELECT "%X0 Select Extr. 0"
|
|
#define UI_TEXT_EXTR1_SELECT "%X1 Select Extr. 1"
|
|
#define UI_TEXT_EXTR2_SELECT "%X1 Select Extr. 2"
|
|
#define UI_TEXT_EXTR_ORIGIN "Set Origin"
|
|
#define UI_TEXT_PRINT_X "Print X:%ax"
|
|
#define UI_TEXT_PRINT_Y "Print Y:%ay"
|
|
#define UI_TEXT_PRINT_Z "Print Z:%az"
|
|
#define UI_TEXT_PRINT_Z_DELTA "Print:%az"
|
|
#define UI_TEXT_MOVE_X "Move X:%aX"
|
|
#define UI_TEXT_MOVE_Y "Move Y:%aY"
|
|
#define UI_TEXT_MOVE_Z "Move Z:%aZ"
|
|
#define UI_TEXT_MOVE_Z_DELTA "Move:%aZ"
|
|
#define UI_TEXT_JERK "Jerk:%aj"
|
|
#define UI_TEXT_ZJERK "Z-Jerk:%aJ"
|
|
#define UI_TEXT_ACCELERATION "Acceleration"
|
|
#define UI_TEXT_STORE_TO_EEPROM "Store to EEPROM"
|
|
#define UI_TEXT_LOAD_EEPROM "Load from EEPROM"
|
|
#define UI_TEXT_DBG_ECHO "Echo :%do"
|
|
#define UI_TEXT_DBG_INFO "Info :%di"
|
|
#define UI_TEXT_DBG_ERROR "Errors :%de"
|
|
#define UI_TEXT_DBG_DRYRUN "Dry run:%dd"
|
|
#define UI_TEXT_OPS_OFF "%O0 OPS Off"
|
|
#define UI_TEXT_OPS_CLASSIC "%O1 OPS Classic"
|
|
#define UI_TEXT_OPS_FAST "%O2 OPS Fast"
|
|
#define UI_TEXT_OPS_RETRACT "Retract :%Or"
|
|
#define UI_TEXT_OPS_BACKSLASH "Backsl. :%Ob"
|
|
#define UI_TEXT_OPS_MINDIST "Min.dist:%Od"
|
|
#define UI_TEXT_OPS_MOVE_AFTER "Move after:%Oa"
|
|
#define UI_TEXT_ANTI_OOZE "Anti Ooze"
|
|
#define UI_TEXT_PRINT_FILE "Select SD File"
|
|
#define UI_TEXT_PAUSE_PRINT "Pause Print"
|
|
#define UI_TEXT_CONTINUE_PRINT "Continue Print"
|
|
#define UI_TEXT_UNMOUNT_CARD "Unmount Card"
|
|
#define UI_TEXT_MOUNT_CARD "Mount Card"
|
|
#define UI_TEXT_DELETE_FILE "Delete file"
|
|
#define UI_TEXT_FEEDRATE "Feedrate"
|
|
#define UI_TEXT_FEED_MAX_X "Max X:%fx"
|
|
#define UI_TEXT_FEED_MAX_Y "Max Y:%fy"
|
|
#define UI_TEXT_FEED_MAX_Z "Max Z:%fz"
|
|
#define UI_TEXT_FEED_MAX_Z_DELTA "Max:%fz"
|
|
#define UI_TEXT_FEED_HOME_X "Home X:%fX"
|
|
#define UI_TEXT_FEED_HOME_Y "Home Y:%fY"
|
|
#define UI_TEXT_FEED_HOME_Z "Home Z:%fZ"
|
|
#define UI_TEXT_FEED_HOME_Z_DELTA "Home:%fZ"
|
|
#define UI_TEXT_ACTION_XPOSITION4 "X:%x0 mm","Min endstop:%sx","Max endstop:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION4 "Y:%x1 mm","Min endstop:%sy","Max endstop:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION4 "Z:%x2 mm","Min endstop:%sz","Max endstop:%sZ",""
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST4 "X:%x0 mm","Min endstop:%sx","Max endstop:%sX",""
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST4 "Y:%x1 mm","Min endstop:%sy","Max endstop:%sY",""
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST4 "Z:%x2 mm","Min endstop:%sz","Max endstop:%sZ",""
|
|
#define UI_TEXT_ACTION_EPOSITION_FAST2 "E:%x3 mm","1 click = 1 mm"
|
|
#define UI_TEXT_ACTION_XPOSITION2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_ACTION_XPOSITION_FAST2 "X:%x0 mm","Min:%sx Max:%sX"
|
|
#define UI_TEXT_ACTION_YPOSITION_FAST2 "Y:%x1 mm","Min:%sy Max:%sY"
|
|
#define UI_TEXT_ACTION_ZPOSITION_FAST2 "Z:%x2 mm","Min:%sz Max:%sZ"
|
|
#define UI_TEXT_FANSPEED "Adjust Fan speed"
|
|
#define UI_TEXT_ACTION_FANSPEED "Fan speed:%Fs%%%"
|
|
#define UI_TEXT_FAN_OFF "Turn Fan Off"
|
|
#define UI_TEXT_FAN_25 "Set Fan 25%%%"
|
|
#define UI_TEXT_FAN_50 "Set Fan 50%%%"
|
|
#define UI_TEXT_FAN_75 "Set Fan 75%%%"
|
|
#define UI_TEXT_FAN_FULL "Set Fan 100%%%"
|
|
#define UI_TEXT_STEPPER_INACTIVE "Stepper Inactive"
|
|
#define UI_TEXT_STEPPER_INACTIVE2 "Dis. After:%is","[s] 0=Off"
|
|
#define UI_TEXT_POWER_INACTIVE "Max. Inactive"
|
|
#define UI_TEXT_POWER_INACTIVE2 "Dis. After:%ip","[s] 0=Off"
|
|
#define UI_TEXT_GENERAL "General"
|
|
#define UI_TEXT_BAUDRATE "Baudrate:%oc"
|
|
#define UI_TEXT_EXTR_STEPS "Steps/MM:%Se"
|
|
#define UI_TEXT_EXTR_START_FEED "Start FR:%Xf"
|
|
#define UI_TEXT_EXTR_MAX_FEED "Max FR:%XF"
|
|
#define UI_TEXT_EXTR_ACCEL "Accel:%XA"
|
|
#define UI_TEXT_EXTR_WATCH "Stab.Time:%Xw"
|
|
#define UI_TEXT_EXTR_ADVANCE_L "Advance lin:%Xl"
|
|
#define UI_TEXT_EXTR_ADVANCE_K "Advance quad:%Xa"
|
|
#define UI_TEXT_EXTR_MANAGER "Control:%Xh"
|
|
#define UI_TEXT_EXTR_PGAIN "DT/PID P:%Xp"
|
|
#define UI_TEXT_EXTR_IGAIN "PID I:%Xi"
|
|
#define UI_TEXT_EXTR_DGAIN "PID D:%Xd"
|
|
#define UI_TEXT_EXTR_DMIN "Drive Min:%Xm"
|
|
#define UI_TEXT_EXTR_DMAX "Drive Max:%XM"
|
|
#define UI_TEXT_EXTR_PMAX "PID Max:%XD"
|
|
#define UI_TEXT_EXTR_XOFF "X-Offset:%Xx"
|
|
#define UI_TEXT_EXTR_YOFF "Y-Offset:%Xy"
|
|
#define UI_TEXT_STRING_HM_BANGBANG "BangBang"
|
|
#define UI_TEXT_STRING_HM_PID "PID"
|
|
#define UI_TEXT_STRING_ACTION "Action:%la"
|
|
#define UI_TEXT_HEATING_EXTRUDER "Heating Extruder"
|
|
#define UI_TEXT_HEATING_BED "Heating Bed"
|
|
#define UI_TEXT_KILLED "Killed"
|
|
#define UI_TEXT_STEPPER_DISABLED "Stepper Disabled"
|
|
#define UI_TEXT_EEPROM_STORED "Configuration","stored in EEPROM"
|
|
#define UI_TEXT_EEPROM_LOADED "Configuration","loaded f. EEPROM"
|
|
#define UI_TEXT_UPLOADING "Uploading..."
|
|
#define UI_TEXT_PAGE_BUFFER "Buffer:%oB"
|
|
#define UI_TEXT_PAGE_EXTRUDER " E:%ec/%Ec" cDEG "C" cARROW "%oC"
|
|
#define UI_TEXT_PAGE_EXTRUDER1 "E1:%e0/%E0" cDEG "C" cARROW "%o0"
|
|
#define UI_TEXT_PAGE_EXTRUDER2 "E2:%e1/%E1" cDEG "C" cARROW "%o1"
|
|
#define UI_TEXT_PAGE_EXTRUDER3 "E3:%e2/%E2" cDEG "C" cARROW "%o2"
|
|
#define UI_TEXT_PAGE_BED " B:%eb/%Eb" cDEG "C" cARROW "%ob"
|
|
#define UI_TEXT_SPEED_MULTIPLY "Speed Rate:%om%%%"
|
|
#define UI_TEXT_FLOW_MULTIPLY "Flow Rate:%of%%%"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_TEMP "Wait Temp.%XT" cDEG "C"
|
|
#define UI_TEXT_EXTR_WAIT_RETRACT_UNITS "Wait Units:%XUmm"
|
|
#if PRINTER == 1
|
|
#define UI_TEXT_PRINTER_READY "ORION Delta"
|
|
#elif PRINTER == 2
|
|
#define UI_TEXT_PRINTER_READY "Rostock Max v2"
|
|
#elif PRINTER == 3
|
|
#define UI_TEXT_PRINTER_READY "ERIS Delta"
|
|
#elif PRINTER == 4
|
|
#define UI_TEXT_PRINTER_READY "DROPLIT v2"
|
|
#elif PRINTER == 5
|
|
#if NUM_EXTRUDER <2
|
|
#define UI_TEXT_PRINTER_READY "Rostock MAX v3"
|
|
#else
|
|
#define UI_TEXT_PRINTER_READY "Rostock MAX v3 Dual"
|
|
#endif
|
|
#elif PRINTER == 6
|
|
#define UI_TEXT_PRINTER_READY "Hacker H2"
|
|
#else
|
|
#define UI_TEXT_PRINTER_READY "Printer Ready"
|
|
#endif
|
|
// Printtime output gets aggregated like <Days_5gisgits>UI_TEXT_PRINTTIME_DAYS<Hours>UI_TEXT_PRINTTIME_HOURS<Minutes>UI_TEXT_PRINTTIME_MINUTES
|
|
// ___88 days 12:45
|
|
#define UI_TEXT_PRINTTIME_DAYS " days "
|
|
#define UI_TEXT_PRINTTIME_HOURS ":"
|
|
#define UI_TEXT_PRINTTIME_MINUTES ""
|
|
#define UI_TEXT_PRINT_TIME "Total Printing Time"
|
|
#define UI_TEXT_PRINT_FILAMENT "Total Filament Used"
|
|
#define UI_TEXT_PRINTED "printed"
|
|
#define UI_TEXT_POWER "ATX power on/off"
|
|
#define UI_TEXT_STRING_HM_DEADTIME "Dead Time"
|
|
#define UI_TEXT_STRING_HM_SLOWBANG "SlowBang"
|
|
#define UI_TEXT_STOP_PRINT "Stop Print"
|
|
#define UI_TEXT_PAGE_FWVERSION "FW Version: "REPETIER_VERSION""
|
|
#define UI_TEXT_PAGE_FWDATE "FW Date: "FIRMWARE_DATE""
|
|
#define UI_TEXT_PAGE_FWPRINTERMODEL "Juan!"
|
|
#define UI_TEXT_SET_MEASURED_ORIGIN "Set Z Origin"
|
|
#define UI_TEXT_CALIBRATE "Calibrate"
|
|
#define UI_TEXT_CAL_PREPARE "Getting Ready","To Calibrate","","Your Machine"
|
|
#define UI_TEXT_CALIBRATING_ENDSTOPS "Calibrating","Endstop Offsets","","Please Wait"
|
|
#define UI_TEXT_CALIBRATING_HEIGHT "Calibrating","Printer Z Height","","Please Wait"
|
|
#define UI_TEXT_CALIBRATING_RADIUS "Calibrating","Horizontal Radius","","Please Wait"
|
|
#define UI_TEXT_CALIBRATING_BED "Calibrating","Bed Level Matrix","","Please Wait"
|
|
|
|
#endif
|