important slicer profile changes:
- first layer height from 110% to 100% - infill overlap from 25% to 35% - enabled ironing. set it to 0.4 mm and 20 mm/s speed - reduced bed height to 1200mm due to max. size support issue. See https://github.com/prusa3d/PrusaSlicer/issues/6072 - retract travel distance from 2 to 20 mm to skip short segments (clogging issue) - reduced support material speed to avoid clogging issue - disabled thin wall detection because it made trouble at some models
This commit is contained in:
parent
f7fe350b0d
commit
da6e777d29
@ -1,5 +1,7 @@
|
||||
# generated by PrusaSlicer 2.2.0+win64 on 2020-07-11 at 20:15:29 UTC
|
||||
# generated by PrusaSlicer 2.3.0+win64 on 2021-06-19 at 21:40:35 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
avoid_crossing_perimeters_max_detour = 0
|
||||
bed_custom_model = trikarus-bed.stl
|
||||
bed_custom_texture = trikarus-bed.svg
|
||||
bed_shape = 498.097x43.5779,492.404x86.8241,482.963x129.41,469.846x171.01,453.154x211.309,433.013x250,409.576x286.788,383.022x321.394,353.553x353.553,321.394x383.022,286.788x409.576,250x433.013,211.309x453.154,171.01x469.846,129.41x482.963,86.8241x492.404,43.5779x498.097,3.06162e-14x500,-43.5779x498.097,-86.8241x492.404,-129.41x482.963,-171.01x469.846,-211.309x453.154,-250x433.013,-286.788x409.576,-321.394x383.022,-353.553x353.553,-383.022x321.394,-409.576x286.788,-433.013x250,-453.154x211.309,-469.846x171.01,-482.963x129.41,-492.404x86.8241,-498.097x43.5779,-500x6.12323e-14,-498.097x-43.5779,-492.404x-86.8241,-482.963x-129.41,-469.846x-171.01,-453.154x-211.309,-433.013x-250,-409.576x-286.788,-383.022x-321.394,-353.553x-353.553,-321.394x-383.022,-286.788x-409.576,-250x-433.013,-211.309x-453.154,-171.01x-469.846,-129.41x-482.963,-86.8241x-492.404,-43.5779x-498.097,-9.18485e-14x-500,43.5779x-498.097,86.8241x-492.404,129.41x-482.963,171.01x-469.846,211.309x-453.154,250x-433.013,286.788x-409.576,321.394x-383.022,353.553x-353.553,383.022x-321.394,409.576x-286.788,433.013x-250,453.154x-211.309,469.846x-171.01,482.963x-129.41,492.404x-86.8241,498.097x-43.5779,500x-1.22465e-13
|
||||
bed_temperature = 0
|
||||
@ -15,6 +17,7 @@ bridge_flow_ratio = 1
|
||||
bridge_speed = 60
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
color_change_gcode = M600
|
||||
colorprint_heights =
|
||||
complete_objects = 0
|
||||
cooling = 1
|
||||
@ -44,22 +47,22 @@ extruder_offset = 0x0
|
||||
extrusion_axis = E
|
||||
extrusion_multiplier = 1
|
||||
extrusion_width = 1.57
|
||||
fan_always_on = 1
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #FFFFFF
|
||||
filament_colour = #C0C0C0
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 18.81
|
||||
filament_density = 1.25
|
||||
filament_density = 1.24
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 1.8
|
||||
filament_diameter = 1.75
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = "offical data from spool:\n- density: 1.25 g/cm^3\n- diameter: 1.75 mm +/- 0.05 mm (90% of all filament spools below +/- 0.02 mm)\n- print temperature: 205 C +/- 10 C"
|
||||
filament_notes = "offical data from spool:\n- density: 1.24 g/cm^3\n- diameter: 1.75 mm +/- 0.05 mm\n- print temperature: 215 C +/- 15 C"
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
@ -70,8 +73,9 @@ filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_settings_id = "Trikarus - Redline Filament PLA"
|
||||
filament_settings_id = "Trikarus - Das Filament PLA"
|
||||
filament_soluble = 0
|
||||
filament_spool_weight = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
@ -85,9 +89,10 @@ fill_pattern = gyroid
|
||||
first_layer_acceleration = 0
|
||||
first_layer_bed_temperature = 0
|
||||
first_layer_extrusion_width = 1.47
|
||||
first_layer_height = 110%
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 20%
|
||||
first_layer_temperature = 205
|
||||
full_fan_speed_layer = 0
|
||||
gap_fill_speed = 40
|
||||
gcode_comments = 0
|
||||
gcode_flavor = marlin
|
||||
@ -95,16 +100,24 @@ gcode_label_objects = 0
|
||||
high_current_on_filament_swap = 0
|
||||
host_type = duet
|
||||
infill_acceleration = 0
|
||||
infill_anchor = 600%
|
||||
infill_anchor_max = 50
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 1.57
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_overlap = 35%
|
||||
infill_speed = 45
|
||||
interface_shells = 0
|
||||
ironing = 1
|
||||
ironing_flowrate = 15%
|
||||
ironing_spacing = 0.4
|
||||
ironing_speed = 20
|
||||
ironing_type = top
|
||||
layer_gcode =
|
||||
layer_height = 1
|
||||
machine_limits_usage = emit_to_gcode
|
||||
machine_max_acceleration_e = 1000,1000
|
||||
machine_max_acceleration_extruding = 1500,1500
|
||||
machine_max_acceleration_retracting = 1500,1500
|
||||
@ -123,7 +136,7 @@ machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
max_fan_speed = 100
|
||||
max_layer_height = 1.4
|
||||
max_print_height = 2000
|
||||
max_print_height = 1200
|
||||
max_print_speed = 50
|
||||
max_volumetric_speed = 110
|
||||
min_fan_speed = 65
|
||||
@ -137,11 +150,13 @@ ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base].gcode
|
||||
overhangs = 1
|
||||
parking_pos_retraction = 92
|
||||
pause_print_gcode = M601
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 1.57
|
||||
perimeter_speed = 35
|
||||
perimeters = 2
|
||||
physical_printer_settings_id =
|
||||
post_process =
|
||||
print_host =
|
||||
print_settings_id = Trikarus
|
||||
@ -156,7 +171,7 @@ printhost_cafile =
|
||||
raft_layers = 0
|
||||
remaining_times = 0
|
||||
resolution = 0
|
||||
retract_before_travel = 2
|
||||
retract_before_travel = 20
|
||||
retract_before_wipe = 0%
|
||||
retract_layer_change = 1
|
||||
retract_length = 3
|
||||
@ -168,8 +183,6 @@ retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 60
|
||||
seam_position = nearest
|
||||
serial_port =
|
||||
serial_speed = 250000
|
||||
silent_mode = 1
|
||||
single_extruder_multi_material = 0
|
||||
single_extruder_multi_material_priming = 1
|
||||
@ -188,7 +201,7 @@ spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
start_gcode = G28 ;reset coordinates - you must delete the files homex.g and homey.g on Duet Web Control because they contain dangerious moves when using default DWC config\n;deactivated stuff:\n;G92 X0 Y0 Z0 ;reset coordinates - does not always work so we use preceding G28\n;M106 P2 S0 ;turn off laser pointers - this is done by sms_prepare.sh script. no need to do twice\nM117 "Starting new GCode print job" ;M291 PMESSAGE does not work here. It just won't be displayed while printing
|
||||
support_material = 0
|
||||
support_material = 1
|
||||
support_material_angle = 0
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 1
|
||||
@ -203,20 +216,21 @@ support_material_interface_spacing = 4
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 10
|
||||
support_material_speed = 60
|
||||
support_material_speed = 45
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
temperature = 215
|
||||
thin_walls = 1
|
||||
template_custom_gcode =
|
||||
thin_walls = 0
|
||||
threads = 8
|
||||
thumbnails =
|
||||
toolchange_gcode =
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 1.4
|
||||
top_solid_infill_speed = 30
|
||||
top_solid_layers = 2
|
||||
top_solid_layers = 4
|
||||
top_solid_min_thickness = 0
|
||||
travel_speed = 130
|
||||
use_firmware_retraction = 1
|
||||
|
Loading…
Reference in New Issue
Block a user