important slicer profile changes:

- first layer height from 110% to 100%
- infill overlap from 25% to 35%
- enabled ironing. set it to 0.4 mm and 20 mm/s speed
- reduced bed height to 1200mm due to max. size support issue. See https://github.com/prusa3d/PrusaSlicer/issues/6072
- retract travel distance from 2 to 20 mm to skip short segments (clogging issue)
- reduced support material speed to avoid clogging issue
- disabled thin wall detection because it made trouble at some models
This commit is contained in:
leyghisbb 2021-06-19 23:49:44 +02:00
parent f7fe350b0d
commit da6e777d29

View File

@ -1,5 +1,7 @@
# generated by PrusaSlicer 2.2.0+win64 on 2020-07-11 at 20:15:29 UTC
# generated by PrusaSlicer 2.3.0+win64 on 2021-06-19 at 21:40:35 UTC
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bed_custom_model = trikarus-bed.stl
bed_custom_texture = trikarus-bed.svg
bed_shape = 498.097x43.5779,492.404x86.8241,482.963x129.41,469.846x171.01,453.154x211.309,433.013x250,409.576x286.788,383.022x321.394,353.553x353.553,321.394x383.022,286.788x409.576,250x433.013,211.309x453.154,171.01x469.846,129.41x482.963,86.8241x492.404,43.5779x498.097,3.06162e-14x500,-43.5779x498.097,-86.8241x492.404,-129.41x482.963,-171.01x469.846,-211.309x453.154,-250x433.013,-286.788x409.576,-321.394x383.022,-353.553x353.553,-383.022x321.394,-409.576x286.788,-433.013x250,-453.154x211.309,-469.846x171.01,-482.963x129.41,-492.404x86.8241,-498.097x43.5779,-500x6.12323e-14,-498.097x-43.5779,-492.404x-86.8241,-482.963x-129.41,-469.846x-171.01,-453.154x-211.309,-433.013x-250,-409.576x-286.788,-383.022x-321.394,-353.553x-353.553,-321.394x-383.022,-286.788x-409.576,-250x-433.013,-211.309x-453.154,-171.01x-469.846,-129.41x-482.963,-86.8241x-492.404,-43.5779x-498.097,-9.18485e-14x-500,43.5779x-498.097,86.8241x-492.404,129.41x-482.963,171.01x-469.846,211.309x-453.154,250x-433.013,286.788x-409.576,321.394x-383.022,353.553x-353.553,383.022x-321.394,409.576x-286.788,433.013x-250,453.154x-211.309,469.846x-171.01,482.963x-129.41,492.404x-86.8241,498.097x-43.5779,500x-1.22465e-13
bed_temperature = 0
@ -15,6 +17,7 @@ bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
clip_multipart_objects = 1
color_change_gcode = M600
colorprint_heights =
complete_objects = 0
cooling = 1
@ -44,22 +47,22 @@ extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 1.57
fan_always_on = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_colour = #C0C0C0
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 18.81
filament_density = 1.25
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.8
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = "offical data from spool:\n- density: 1.25 g/cm^3\n- diameter: 1.75 mm +/- 0.05 mm (90% of all filament spools below +/- 0.02 mm)\n- print temperature: 205 C +/- 10 C"
filament_notes = "offical data from spool:\n- density: 1.24 g/cm^3\n- diameter: 1.75 mm +/- 0.05 mm\n- print temperature: 215 C +/- 15 C"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
@ -70,8 +73,9 @@ filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = "Trikarus - Redline Filament PLA"
filament_settings_id = "Trikarus - Das Filament PLA"
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
@ -85,9 +89,10 @@ fill_pattern = gyroid
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_extrusion_width = 1.47
first_layer_height = 110%
first_layer_height = 100%
first_layer_speed = 20%
first_layer_temperature = 205
full_fan_speed_layer = 0
gap_fill_speed = 40
gcode_comments = 0
gcode_flavor = marlin
@ -95,16 +100,24 @@ gcode_label_objects = 0
high_current_on_filament_swap = 0
host_type = duet
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 1.57
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_overlap = 35%
infill_speed = 45
interface_shells = 0
ironing = 1
ironing_flowrate = 15%
ironing_spacing = 0.4
ironing_speed = 20
ironing_type = top
layer_gcode =
layer_height = 1
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 1000,1000
machine_max_acceleration_extruding = 1500,1500
machine_max_acceleration_retracting = 1500,1500
@ -123,7 +136,7 @@ machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_fan_speed = 100
max_layer_height = 1.4
max_print_height = 2000
max_print_height = 1200
max_print_speed = 50
max_volumetric_speed = 110
min_fan_speed = 65
@ -137,11 +150,13 @@ ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
parking_pos_retraction = 92
pause_print_gcode = M601
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 1.57
perimeter_speed = 35
perimeters = 2
physical_printer_settings_id =
post_process =
print_host =
print_settings_id = Trikarus
@ -156,7 +171,7 @@ printhost_cafile =
raft_layers = 0
remaining_times = 0
resolution = 0
retract_before_travel = 2
retract_before_travel = 20
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 3
@ -168,8 +183,6 @@ retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
seam_position = nearest
serial_port =
serial_speed = 250000
silent_mode = 1
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 1
@ -188,7 +201,7 @@ spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = "; Filament gcode\n"
start_gcode = G28 ;reset coordinates - you must delete the files homex.g and homey.g on Duet Web Control because they contain dangerious moves when using default DWC config\n;deactivated stuff:\n;G92 X0 Y0 Z0 ;reset coordinates - does not always work so we use preceding G28\n;M106 P2 S0 ;turn off laser pointers - this is done by sms_prepare.sh script. no need to do twice\nM117 "Starting new GCode print job" ;M291 PMESSAGE does not work here. It just won't be displayed while printing
support_material = 0
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 1
@ -203,20 +216,21 @@ support_material_interface_spacing = 4
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 10
support_material_speed = 60
support_material_speed = 45
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
temperature = 215
thin_walls = 1
template_custom_gcode =
thin_walls = 0
threads = 8
thumbnails =
toolchange_gcode =
top_fill_pattern = rectilinear
top_infill_extrusion_width = 1.4
top_solid_infill_speed = 30
top_solid_layers = 2
top_solid_layers = 4
top_solid_min_thickness = 0
travel_speed = 130
use_firmware_retraction = 1