„prusaslicer_profile/print/Trikarus.ini“ ändern

prusaslicer_profile/print/Trikarus.ini

@@ -1,20 +1,23 @@
-# generated by PrusaSlicer 2.2.0 on 2021-08-07 at 13:05:18 UTC
+# generated by PrusaSlicer 2.4.0-alpha1+linux-x64 on 2021-09-04 at 13:26:00 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = concentric
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
 bottom_solid_min_thickness = 0
 bridge_acceleration = 0
 bridge_angle = 0
 bridge_flow_ratio = 1
 bridge_speed = 33
-brim_width = 0
+brim_separation = 0
+brim_type = outer_only
+brim_width = 25
 clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = 
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.57
@@ -26,28 +29,42 @@ extruder_clearance_radius = 20
 extrusion_width = 1.57
 fill_angle = 45
 fill_density = 100%
-fill_pattern = concentric
+fill_pattern = rectilinear
 first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 150%
-first_layer_height = 100%
+first_layer_height = 1
 first_layer_speed = 15
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 20
 gcode_comments = 0
 gcode_label_objects = 0
 infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 1.57
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 30%
+infill_overlap = 25%
 infill_speed = 33
 inherits = 
 interface_shells = 0
-layer_height = 1
+ironing = 1
+ironing_flowrate = 10%
+ironing_spacing = 0.7
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.5
 max_print_speed = 33
 max_volumetric_speed = 40
 min_skirt_length = 100
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -60,14 +77,19 @@ perimeter_speed = 33
 perimeters = 2
 post_process = 
 print_settings_id = Trikarus
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_position = nearest
+seam_position = random
 single_extruder_multi_material_priming = 1
 skirt_distance = 40
 skirt_height = 1
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 15
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
@@ -79,7 +101,10 @@ standby_temperature_delta = -5
 support_material = 1
 support_material_angle = 0
 support_material_auto = 0
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
 support_material_buildplate_only = 0
+support_material_closing_radius = 2
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
@@ -87,28 +112,33 @@ support_material_extrusion_width = 1.22
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 2
+support_material_interface_pattern = auto
 support_material_interface_spacing = 4
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 8
 support_material_speed = 33
+support_material_style = grid
 support_material_synchronize_layers = 0
 support_material_threshold = 0
 support_material_with_sheath = 1
 support_material_xy_spacing = 50%
+thick_bridges = 1
 thin_walls = 1
 threads = 6
 top_fill_pattern = concentric
 top_infill_extrusion_width = 1.4
 top_solid_infill_speed = 15
-top_solid_layers = 4
+top_solid_layers = 2
 top_solid_min_thickness = 0
 travel_speed = 130
+travel_speed_z = 0
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
-xy_size_compensation = 0
+xy_size_compensation = 0