From fc9e76354f71a33a4df8663628e7bf7b9d5c81bf Mon Sep 17 00:00:00 2001 From: Mario Voigt Date: Mon, 27 Sep 2021 15:19:16 +0200 Subject: [PATCH] =?UTF-8?q?=E2=80=9Eprusaslicer=5Fprofile/print/Trikarus.i?= =?UTF-8?q?ni=E2=80=9C=20=C3=A4ndern?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- prusaslicer_profile/print/Trikarus.ini | 52 ++++++++++++++++++++------ 1 file changed, 41 insertions(+), 11 deletions(-) diff --git a/prusaslicer_profile/print/Trikarus.ini b/prusaslicer_profile/print/Trikarus.ini index 4f769d5..712eaa0 100644 --- a/prusaslicer_profile/print/Trikarus.ini +++ b/prusaslicer_profile/print/Trikarus.ini @@ -1,20 +1,23 @@ -# generated by PrusaSlicer 2.2.0 on 2021-08-07 at 13:05:18 UTC +# generated by PrusaSlicer 2.4.0-alpha1+linux-x64 on 2021-09-04 at 13:26:00 UTC avoid_crossing_perimeters = 0 -bottom_fill_pattern = concentric +avoid_crossing_perimeters_max_detour = 0 +bottom_fill_pattern = rectilinear bottom_solid_layers = 2 bottom_solid_min_thickness = 0 bridge_acceleration = 0 bridge_angle = 0 bridge_flow_ratio = 1 bridge_speed = 33 -brim_width = 0 +brim_separation = 0 +brim_type = outer_only +brim_width = 25 clip_multipart_objects = 1 compatible_printers = compatible_printers_condition = complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 -draft_shield = 0 +draft_shield = disabled elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 1.57 @@ -26,28 +29,42 @@ extruder_clearance_radius = 20 extrusion_width = 1.57 fill_angle = 45 fill_density = 100% -fill_pattern = concentric +fill_pattern = rectilinear first_layer_acceleration = 0 +first_layer_acceleration_over_raft = 0 first_layer_extrusion_width = 150% -first_layer_height = 100% +first_layer_height = 1 first_layer_speed = 15 +first_layer_speed_over_raft = 30 +fuzzy_skin = none +fuzzy_skin_point_dist = 0.8 +fuzzy_skin_thickness = 0.3 +gap_fill_enabled = 1 gap_fill_speed = 20 gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 0 +infill_anchor = 600% +infill_anchor_max = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 1.57 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 30% +infill_overlap = 25% infill_speed = 33 inherits = interface_shells = 0 -layer_height = 1 +ironing = 1 +ironing_flowrate = 10% +ironing_spacing = 0.7 +ironing_speed = 15 +ironing_type = top +layer_height = 0.5 max_print_speed = 33 max_volumetric_speed = 40 min_skirt_length = 100 +mmu_segmented_region_max_width = 0 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 @@ -60,14 +77,19 @@ perimeter_speed = 33 perimeters = 2 post_process = print_settings_id = Trikarus +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = random single_extruder_multi_material_priming = 1 skirt_distance = 40 skirt_height = 1 skirts = 1 slice_closing_radius = 0.049 +slicing_mode = regular small_perimeter_speed = 15 solid_infill_below_area = 70 solid_infill_every_layers = 0 @@ -79,7 +101,10 @@ standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 support_material_auto = 0 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 support_material_buildplate_only = 0 +support_material_closing_radius = 2 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 @@ -87,28 +112,33 @@ support_material_extrusion_width = 1.22 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 support_material_interface_layers = 2 +support_material_interface_pattern = auto support_material_interface_spacing = 4 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 8 support_material_speed = 33 +support_material_style = grid support_material_synchronize_layers = 0 support_material_threshold = 0 support_material_with_sheath = 1 support_material_xy_spacing = 50% +thick_bridges = 1 thin_walls = 1 threads = 6 top_fill_pattern = concentric top_infill_extrusion_width = 1.4 top_solid_infill_speed = 15 -top_solid_layers = 4 +top_solid_layers = 2 top_solid_min_thickness = 0 travel_speed = 130 +travel_speed_z = 0 wipe_tower = 0 wipe_tower_bridging = 10 +wipe_tower_brim_width = 2 wipe_tower_no_sparse_layers = 0 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 -xy_size_compensation = 0 +xy_size_compensation = 0 \ No newline at end of file