da6e777d29
- first layer height from 110% to 100% - infill overlap from 25% to 35% - enabled ironing. set it to 0.4 mm and 20 mm/s speed - reduced bed height to 1200mm due to max. size support issue. See https://github.com/prusa3d/PrusaSlicer/issues/6072 - retract travel distance from 2 to 20 mm to skip short segments (clogging issue) - reduced support material speed to avoid clogging issue - disabled thin wall detection because it made trouble at some models |
||
|---|---|---|
| firmware_smartstepper_trikarus/stepper_nano_zero | ||
| grafana | ||
| inkscape_drawings | ||
| prusaslicer_profile | ||
| abc_measurements.xlsx | ||