Merge branch 'feature/printerdriver' of https://github.com/Doodle3D/doodle3d-client into feature/printerdriver

# By peteruithoven
# Via peteruithoven
* 'feature/printerdriver' of https://github.com/Doodle3D/doodle3d-client:
  Check gcode generation feasibility check to prevent iPad/iPhone crashes
  Removing confirm
  stop status checks on override and start them again when there is a first response
  reset the status check when printer state is overruled

js/Printer.js

@@ -61,7 +61,7 @@ function Printer() {
     console.log("  wifiboxURL: ",this.wifiboxURL);
     
     if(autoUpdate) {
-	    this.checkStatus();
+    	this.startStatusCheckInterval();
     }
  	}
 	
@@ -151,7 +151,7 @@ function Printer() {
 				  	if (completed) {
 		          console.log("Printer:sendPrintPart:gcode sending completed");
 		          this.gcode = [];
-		          btnStop.css("display","block");
+		          btnStop.css("display","block"); // hack 
 		          //self.targetTemperature = settings["printer.temperature"]; // slight hack
 		        } else {
 		        	// only if the state hasn't bin changed (by for example pressing stop) we send more gcode
@@ -163,6 +163,12 @@ function Printer() {
 		        	}
 		        }
 		      }
+			  	// after we know the first gcode packed has bin received or failed
+					// (and the driver had time to update the printer.state) 
+					// we start checking the status again
+					if(sendIndex == 0) {
+						self.startStatusCheckInterval();
+					}
 				}
 			}).fail(function() { 
 				console.log("Printer:sendPrintPart: failed");
@@ -171,6 +177,11 @@ function Printer() {
 					console.log("request printer:sendPrintPart failed retry");
 					self.sendPrintPart(sendIndex, sendLength) 
 				},self.retryDelay); // retry after delay
+				
+				// after we know the gcode packed has bin received or failed
+				// (and the driver had time to update the printer.state) 
+				// we start checking the status again
+				self.startStatusCheckInterval();
 			});
 		} else {
       console.log ("Printer >> f:sendPrintPart() >> communicateWithWifibox is false, so not executing this function");
@@ -188,17 +199,38 @@ function Printer() {
 			  timeout: this.timeoutTime,
 			  success: function(data){
 				  console.log("Printer:stop response: ", data);
+				  
+				  // after we know the stop has bin received or failed
+					// (and the driver had time to update the printer.state) 
+					// we start checking the status again
+					self.startStatusCheckInterval();
 			  }
 			}).fail(function() { 
 				console.log("Printer:stop: failed");
 				clearTimeout(self.retryStopDelay);
 				self.retryStopDelay = setTimeout(function() { self.stop() },self.retryDelay); // retry after delay
+				
+				// after we know the stop has bin received or failed
+				// (and the driver had time to update the printer.state) 
+				// we start checking the status again
+				self.startStatusCheckInterval();
 			});
 		} else {
       console.log ("Printer >> f:communicateWithWifibox() >> communicateWithWifibox is false, so not executing this function");
     }
 	}
-	
+	this.startStatusCheckInterval = function() {
+		console.log("Printer:startStatusCheckInterval");
+		self.checkStatus();
+		clearTimeout(self.checkStatusDelay);
+		clearTimeout(self.retryCheckStatusDelay);
+		self.checkStatusDelay = setTimeout(function() { self.checkStatus() }, self.checkStatusInterval);
+	}
+	this.stopStatusCheckInterval = function() {
+		console.log("Printer:stopStatusCheckInterval");
+		clearTimeout(self.checkStatusDelay);
+		clearTimeout(self.retryCheckStatusDelay);
+	}
 	this.checkStatus = function() {
 		console.log("Printer:checkStatus");
 		this.stateOverruled = false;
@@ -267,5 +299,7 @@ function Printer() {
 		self.state = newState;
 		
 		$(document).trigger(Printer.UPDATE);
+		
+		this.stopStatusCheckInterval();
 	}
 }

js/buttonbehaviors.js

@@ -192,7 +192,7 @@ function initButtonBehavior() {
 }
 function stopPrint() {
   console.log("f:stopPrint() >> sendPrintCommands = " + sendPrintCommands);
-  if (!confirm("Weet je zeker dat je huidige print wilt stoppen?")) return;
+  //if (!confirm("Weet je zeker dat je huidige print wilt stoppen?")) return;
   if (sendPrintCommands) printer.stop();
   //setState(Printer.STOPPING_STATE,printer.hasControl);
   printer.overruleState(Printer.STOPPING_STATE);
@@ -212,23 +212,26 @@ function print(e) {
 
   //$(".btnPrint").css("display","none");
 
-  
   if (_points.length > 2) {
 
   	//setState(Printer.BUFFERING_STATE,printer.hasControl);
     printer.overruleState(Printer.BUFFERING_STATE);
     
-    btnStop.css("display","none");
+    btnStop.css("display","none"); // hack
     
     // we put the gcode generation in a little delay 
     // so that for example the print button is disabled right away
     clearTimeout(gcodeGenerateDelayer);
     gcodeGenerateDelayer = setTimeout(function() { 
-    	var gcode = generate_gcode();
-			//startPrint(gencode);
     	
-			if (sendPrintCommands) {
-				printer.print(gcode);
+    	var gcode = generate_gcode();
+    	if (sendPrintCommands) {
+    		if(gcode.length > 0) {
+    			printer.print(gcode);
+    		} else {
+    			printer.overruleState(Printer.IDLE_STATE);
+    			printer.startStatusCheckInterval();
+    		}
 			} else {
 				console.log("sendPrintCommands is false: not sending print command to 3dprinter");
 			}

js/gcodeGenerating.js

@@ -25,8 +25,10 @@ gcodeEnd.push("G90"); 							// absolute positioning
 gcodeEnd.push("M117 Done                ");	// display message (20 characters to clear whole screen)*/
 
 
+var MAX_POINTS_TO_PRINT = 400000; //80000; //40000; 
 var gcode = [];
-function generate_gcode(callback) {
+
+function generate_gcode() {
   console.log("f:generategcode()");
 
   var startGcode = [];
@@ -124,7 +126,6 @@ function generate_gcode(callback) {
 
   // copy array without reference -> http://stackoverflow.com/questions/9885821/copying-of-an-array-of-objects-to-another-array-without-object-reference-in-java
   var points = JSON.parse(JSON.stringify(_points));
-  console.log("f:generategcode() >> points.length: " + points.length);
 
 //  console.log("f:generategcode() >> paths: " + paths.toString());
 //  console.log("paths.toString(): " + paths.toString());
@@ -153,6 +154,19 @@ function generate_gcode(callback) {
   console.log("f:generategcode() >> layers: " + layers);
   if (layers == Infinity) return;
 
+	// check feasibility of design
+	var pointsToPrint = points.length * layers*(objectHeight/maxObjectHeight)
+	//console.log("  points.length: ",points.length);
+	//console.log("  numLayers: ",(layers*(objectHeight/maxObjectHeight)));
+	//console.log("  pointsToPrint: ",pointsToPrint);
+	//console.log("  MAX_POINTS_TO_PRINT: ",MAX_POINTS_TO_PRINT);
+  
+  if(pointsToPrint > MAX_POINTS_TO_PRINT) {
+  	alert("Sorry, your doodle to to complex and / or to high");
+  	console.log("WARNING: to many points to convert to gcode");
+  	return [];
+  }
+	
   for (var layer = 0; layer < layers; layer++) {
 
     var p = JSON.parse(JSON.stringify(points)); // [].concat(points);
@@ -262,21 +276,10 @@ function generate_gcode(callback) {
       break;
     }
   }
-
   // add gcode end commands
   gcode = gcode.concat(endGcode);
   
-  // debug
-//  var _gc = gc.join("\n");
-//  console.log("f:generategcode() >> _gc = " + _gc);
-
-  // Return the gcode array, joined to one string with '\n' (line break) as the join parameter
-  // This should result in a nice long string with line breaks
-  if (callback == undefined) {
-	  return gcode;
-  } else {
-    // post
-  }
+  return gcode;
 }
 
 function scaleFunction(percent) {