diff --git a/Makefile b/Makefile
index 84a769a..d69859c 100644
--- a/Makefile
+++ b/Makefile
@@ -4,7 +4,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME := doodle3d-client
-PKG_VERSION := 0.9.0
+PKG_VERSION := 0.9.1
PKG_RELEASE := 1
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
diff --git a/js_src/Printer.js b/js_src/Printer.js
index aedb569..dcae80c 100644
--- a/js_src/Printer.js
+++ b/js_src/Printer.js
@@ -11,7 +11,7 @@ function setPrintprogress(val) {
//*/
function Printer() {
-
+
Printer.WIFIBOX_DISCONNECTED_STATE = "wifibox disconnected";
Printer.UNKNOWN_STATE = "unknown"; // happens when a printer is connection but there isn't communication yet
Printer.DISCONNECTED_STATE = "disconnected"; // printer disconnected
@@ -21,40 +21,40 @@ function Printer() {
Printer.STOPPING_STATE = "stopping"; // when you stop (abort) a print it prints the endcode
Printer.ON_BEFORE_UNLOAD_MESSAGE = "You're doodle is still being send to the printer, leaving will result in a incomplete 3D print";
-
+
this.temperature = 0;
this.targetTemperature = 0;
this.currentLine = 0;
this.totalLines = 0;
this.bufferedLines = 0;
this.state = Printer.UNKNOWN_STATE;
- this.hasControl = true; // whether this client has control access
-
- this.wifiboxURL;
-
+ this.hasControl = true; // whether this client has control access
+
+ this.wifiboxURL;
+
this.checkStatusInterval = 3000;
this.checkStatusDelay;
this.timeoutTime = 3000;
this.sendPrintPartTimeoutTime = 5000;
-
+
this.gcode; // gcode to be printed
- this.sendLength = 1500; // max amount of gcode lines per post (limited because WiFi box can't handle to much)
+ this.sendLength = 500; // max amount of gcode lines per post (limited because WiFi box can't handle to much)
this.retryDelay = 2000; // retry setTimout delay
this.retrySendPrintPartDelay; // retry setTimout instance
this.retryCheckStatusDelay; // retry setTimout instance
this.retryStopDelay; // retry setTimout instance
this.retryPreheatDelay; // retry setTimout instance
-
+
Printer.MAX_GCODE_SIZE = 10; // max size of gcode in MB's (estimation)
-
+
this.stateOverruled = false;
-
+
// Events
Printer.UPDATE = "update";
-
+
var self = this;
-
+
this.init = function() {
console.log("Printer:init");
//this.wifiboxURL = "http://" + window.location.host + "/cgi-bin/d3dapi";
@@ -62,21 +62,21 @@ function Printer() {
this.wifiboxURL = wifiboxURL;
//this.wifiboxURL = "proxy5.php";
console.log(" wifiboxURL: ",this.wifiboxURL);
-
+
if(autoUpdate) {
this.startStatusCheckInterval();
}
}
-
+
this.preheat = function() {
console.log("Printer:preheat");
-
+
if( this.state == Printer.BUFFERING_STATE ||
this.state == Printer.PRINTING_STATE ||
this.state == Printer.STOPPING_STATE) {
return;
}
-
+
var self = this;
if (communicateWithWifibox) {
$.ajax({
@@ -91,7 +91,7 @@ function Printer() {
self.retryPreheatDelay = setTimeout(function() { self.preheat() },self.retryDelay); // retry after delay
}
}
- }).fail(function() {
+ }).fail(function() {
console.log("Printer:preheat: failed");
clearTimeout(self.retryPreheatDelay);
self.retryPreheatDelay = setTimeout(function() { self.preheat() },self.retryDelay); // retry after delay
@@ -100,41 +100,41 @@ function Printer() {
console.log ("Printer >> f:preheat() >> communicateWithWifibox is false, so not executing this function");
}
}
-
+
this.print = function(gcode) {
console.log("Printer:print");
console.log(" gcode total # of lines: " + gcode.length);
-
+
message.set("Sending doodle to printer...",Message.NOTICE);
self.addLeaveWarning();
-
+
/*for (i = 0; i < gcode.length; i++) {
gcode[i] += " (" + i + ")";
}*/
-
+
this.sendIndex = 0;
this.gcode = gcode;
-
+
//console.log(" gcode[20]: ",gcode[20]);
var gcodeLineSize = this.byteSize(gcode[20]);
//console.log(" gcodeLineSize: ",gcodeLineSize);
var gcodeSize = gcodeLineSize*gcode.length/1024/1024; // estimate gcode size in MB's
console.log(" gcodeSize: ",gcodeSize);
-
+
if(gcodeSize > Printer.MAX_GCODE_SIZE) {
alert("Error: Printer:print: gcode file is probably too big ("+gcodeSize+"MB) (max: "+Printer.MAX_GCODE_SIZE+"MB)");
console.log("Error: Printer:print: gcode file is probably too big ("+gcodeSize+"MB) (max: "+Printer.MAX_GCODE_SIZE+"MB)");
-
+
this.overruleState(Printer.IDLE_STATE);
this.startStatusCheckInterval();
message.hide();
self.removeLeaveWarning();
-
+
return;
}
-
+
//this.targetTemperature = settings["printer.temperature"]; // slight hack
-
+
this.sendPrintPart(this.sendIndex, this.sendLength);
}
this.byteSize = function(s){
@@ -142,10 +142,10 @@ function Printer() {
}
this.sendPrintPart = function(sendIndex,sendLength) {
console.log("Printer:sendPrintPart sendIndex: " + sendIndex + "/" + this.gcode.length + ", sendLength: " + sendLength);
-
+
var firstOne = (sendIndex == 0)? true : false;
var start = firstOne; // start printing right away
-
+
var completed = false;
if (this.gcode.length < (sendIndex + sendLength)) {
console.log(" sending less than max sendLength (and last)");
@@ -154,7 +154,7 @@ function Printer() {
completed = true;
}
var gcodePart = this.gcode.slice(sendIndex, sendIndex+sendLength);
-
+
var postData = { gcode: gcodePart.join("\n"), first: firstOne, start: start};
var self = this;
if (communicateWithWifibox) {
@@ -166,7 +166,7 @@ function Printer() {
timeout: this.sendPrintPartTimeoutTime,
success: function(data){
console.log("Printer:sendPrintPart response: ",data);
-
+
if(data.status == "success") {
if (completed) {
console.log("Printer:sendPrintPart:gcode sending completed");
@@ -177,8 +177,8 @@ function Printer() {
//self.targetTemperature = settings["printer.temperature"]; // slight hack
} else {
// only if the state hasn't bin changed (by for example pressing stop) we send more gcode
-
- console.log("Printer:sendPrintPart:gcode part received (state: ",self.state,")");
+
+ console.log("Printer:sendPrintPart:gcode part received (state: ",self.state,")");
if(self.state == Printer.PRINTING_STATE || self.state == Printer.BUFFERING_STATE) {
console.log("Printer:sendPrintPart:sending next part");
self.sendPrintPart(sendIndex + sendLength, sendLength);
@@ -186,22 +186,22 @@ function Printer() {
}
}
// after we know the first gcode packed has bin received or failed
- // (and the driver had time to update the printer.state)
+ // (and the driver had time to update the printer.state)
// we start checking the status again
if(sendIndex == 0) {
self.startStatusCheckInterval();
}
}
- }).fail(function() {
+ }).fail(function() {
console.log("Printer:sendPrintPart: failed");
clearTimeout(self.retrySendPrintPartDelay);
self.retrySendPrintPartDelay = setTimeout(function() {
console.log("request printer:sendPrintPart failed retry");
- self.sendPrintPart(sendIndex, sendLength)
+ self.sendPrintPart(sendIndex, sendLength)
},self.retryDelay); // retry after delay
-
+
// after we know the gcode packed has bin received or failed
- // (and the driver had time to update the printer.state)
+ // (and the driver had time to update the printer.state)
// we start checking the status again
self.startStatusCheckInterval();
});
@@ -209,7 +209,7 @@ function Printer() {
console.log ("Printer >> f:sendPrintPart() >> communicateWithWifibox is false, so not executing this function");
}
}
-
+
this.stop = function() {
console.log("Printer:stop");
endCode = generateEndCode();
@@ -225,19 +225,19 @@ function Printer() {
timeout: this.timeoutTime,
success: function(data){
console.log("Printer:stop response: ", data);
-
+
// after we know the stop has bin received or failed
- // (and the driver had time to update the printer.state)
+ // (and the driver had time to update the printer.state)
// we start checking the status again
self.startStatusCheckInterval();
}
- }).fail(function() {
+ }).fail(function() {
console.log("Printer:stop: failed");
clearTimeout(self.retryStopDelay);
self.retryStopDelay = setTimeout(function() { self.stop() },self.retryDelay); // retry after delay
-
+
// after we know the stop has bin received or failed
- // (and the driver had time to update the printer.state)
+ // (and the driver had time to update the printer.state)
// we start checking the status again
self.startStatusCheckInterval();
});
@@ -269,9 +269,9 @@ function Printer() {
timeout: this.timeoutTime,
success: function(response){
//console.log(" Printer:status: ",response.data.state); //," response: ",response);
-
+
self.handleStatusUpdate(response);
-
+
clearTimeout(self.checkStatusDelay);
clearTimeout(self.retryCheckStatusDelay);
self.checkStatusDelay = setTimeout(function() { self.checkStatus() }, self.checkStatusInterval);
@@ -300,11 +300,11 @@ function Printer() {
self.state = data.state;
//console.log(" state > ",self.state);
}
-
+
// temperature
self.temperature = data.hotend;
self.targetTemperature = data.hotend_target;
-
+
// progress
self.currentLine = data.current_line;
self.totalLines = data.total_lines;
@@ -312,7 +312,7 @@ function Printer() {
// access
self.hasControl = data.has_control;
-
+
if(self.state == Printer.PRINTING_STATE || self.state == Printer.STOPPING_STATE) {
console.log("progress: ",self.currentLine+"/"+self.totalLines+" ("+self.bufferedLines+") ("+self.state+")");
}
@@ -322,14 +322,14 @@ function Printer() {
this.overruleState = function(newState) {
this.stateOverruled = true;
console.log(" stateOverruled: ",this.stateOverruled);
-
+
self.state = newState;
-
+
$(document).trigger(Printer.UPDATE);
-
+
this.stopStatusCheckInterval();
}
-
+
this.removeLeaveWarning = function() {
window.onbeforeunload = null;
}
@@ -339,4 +339,4 @@ function Printer() {
return Printer.ON_BEFORE_UNLOAD_MESSAGE;
};
}
-}
\ No newline at end of file
+}
diff --git a/js_src/gcodeGenerating.js b/js_src/gcodeGenerating.js
index 8d19f59..d992600 100644
--- a/js_src/gcodeGenerating.js
+++ b/js_src/gcodeGenerating.js
@@ -25,13 +25,13 @@ gcodeEnd.push("G90"); // absolute positioning
gcodeEnd.push("M117 Done "); // display message (20 characters to clear whole screen)*/
-var MAX_POINTS_TO_PRINT = 200000; //400000; //80000; //40000;
+var MAX_POINTS_TO_PRINT = 200000; //400000; //80000; //40000;
var gcode = [];
function generate_gcode() {
console.log("f:generategcode()");
-
+
gcode = [];
console.log("settings: ",settings);
@@ -56,13 +56,13 @@ function generate_gcode() {
var preheatBedTemperature = settings["printer.heatup.bed.temperature"];
var printerBedWidth = settings["printer.bed.width"];
var printerBedHeight = settings["printer.bed.height"];
-
+
var gCodeOffsetX = printerBedWidth/2; //110; // mm
var gCodeOffsetY = printerBedHeight/2; //110; // mm
-
+
var startCode = generateStartCode();
var endCode = generateEndCode();
-
+
/*
console.log("f:generate_gcode >> EFFE CHECKEN:");
console.log(" speed: " + speed);
@@ -104,13 +104,13 @@ function generate_gcode() {
// console.log("f:generategcode() >> paths: " + paths.toString());
// console.log("paths.toString(): " + paths.toString());
// return;
-
+
//gcode.push("M104 S" + temperature); // set target temperature and do not wait for the extruder to reach it
//gcode.push("M109 S" + temperature); // set target temperature and wait for the extruder to reach it
-
+
// add gcode begin commands
gcode = gcode.concat(startCode);
-
+
//gcode.push("M109 S" + temperature); // set target temperature and wait for the extruder to reach it
var layers = maxObjectHeight / layerHeight; //maxObjectHeight instead of objectHeight
@@ -134,15 +134,15 @@ function generate_gcode() {
//console.log(" numLayers: ",(layers*(objectHeight/maxObjectHeight)));
//console.log(" pointsToPrint: ",pointsToPrint);
//console.log(" MAX_POINTS_TO_PRINT: ",MAX_POINTS_TO_PRINT);
-
+
console.log("pointsToPrint: ",pointsToPrint);
-
+
if(pointsToPrint > MAX_POINTS_TO_PRINT) {
alert("Sorry, your doodle is too complex or too high. Please try to simplify it.");
console.log("ERROR: to many points too convert to gcode");
return [];
}
-
+
for (var layer = 0; layer < layers; layer++) {
var p = JSON.parse(JSON.stringify(points)); // [].concat(points);
@@ -254,13 +254,13 @@ function generate_gcode() {
}
// add gcode end commands
gcode = gcode.concat(endCode);
-
+
return gcode;
}
function generateStartCode() {
var printerType = settings["printer.type"];
-
+
var startCode = "";
if(settingsWindow.isMarlinPrinter(printerType)) {
startCode = settings["printer.startcode.marlin"];
@@ -273,7 +273,7 @@ function generateStartCode() {
}
function generateEndCode() {
var printerType = settings["printer.type"];
-
+
var endCode = "";
if(settingsWindow.isMarlinPrinter(printerType)) {
endCode = settings["printer.endcode.marlin"];
@@ -292,9 +292,9 @@ function subsituteVariables(gcode) {
var preheatTemperature = settings["printer.heatup.temperature"];
var preheatBedTemperature = settings["printer.heatup.bed.temperature"];
var printerType = settings["printer.type"];
-
+
switch (printerType) {
- case "makerbot_replicator2": printerType = "r2x"; break;
+ case "makerbot_replicator2": printerType = "r2x"; break; //FIXME: this should be r2, with a separate type for r2x
case "makerbot_thingomatic": printerType = "t6"; break;
}
diff --git a/www/index.html b/www/index.html
index 9fda06e..2965c91 100644
--- a/www/index.html
+++ b/www/index.html
@@ -150,6 +150,8 @@
+
+