Not all fields are saveable at the moment
3D printer
Type:
Ultimaker
Makerbot CupCake
Prusa Mendel
Speed:
115200 bps
2500000 bps
Port:
/dev/tty.usbmodem411
/dev/tty.usbmodem621
Check connection...
Print settings
Layer height:
mm
Wall thickness:
mm
Filament thickness:
mm
Temperature:
degrees C
Speed:
mm/s
Travel speed:
mm/s
Auto warm-up:
First layer slow:
Use sub-layers:
Use retraction:
Retraction amount:
mm
Retraction min distance:
mm
Retraction speed:
mm/s
Auto Warm up command:
Access point settings
Wi-Fi box IP address:
Wi-Fi box netmask:
Wi-Fi box ssid*:
* The macro
%%MAC_ADDR_TAIL%%
will be replaced by the last 6 digits of your Doodle3D Wi-Fi box's MAC address.
GCODE settings
Start:
G21 (mm) G91 (relative) G28 X0 Y0 Z0 (physical home) M104 S230 (temperature) G1 E10 F250 (flow) G92 X-100 Y-100 Z0 E10 G1 Z3 F5000 (prevent diagonal line) G90 (absolute) M106 (fan on)
End:
G1 X-100 Y-100 F15000 (fast homing) M107 M84 (disable axes)
Advanced settings
zOffset=0 loadOffset=0,0 showWarmUp=true loopAlways=false maxObjectHeight=200 maxScaleDifference=.1 quitOnEscape=true screenToMillimeterScale=.3 targetTemperature=230