Not all fields are saveable at the moment

3D printer

Type: Ultimaker Makerbot CupCake Prusa Mendel
Speed: 115200 bps 2500000 bps
Port: /dev/tty.usbmodem411 /dev/tty.usbmodem621 Check connection...

Print settings

Layer height:mm
Wall thickness:mm
Filament thickness:mm
Temperature:degrees C

Speed:mm/s
Travel speed:mm/s

Auto warm-up:
First layer slow:
Use sub-layers:
Use retraction:

Retraction amount:mm
Retraction min distance:mm
Retraction speed:mm/s

Access point settings

Wi-Fi box IP address:
Wi-Fi box netmask:
Wi-Fi box ssid*:

* The macro %%MAC_ADDR_TAIL%% will be replaced by the last 6 digits of your Doodle3D Wi-Fi box's MAC address.

GCODE settings

Start: G21 (mm) G91 (relative) G28 X0 Y0 Z0 (physical home) M104 S230 (temperature) G1 E10 F250 (flow) G92 X-100 Y-100 Z0 E10 G1 Z3 F5000 (prevent diagonal line) G90 (absolute) M106 (fan on)

End: G1 X-100 Y-100 F15000 (fast homing) M107 M84 (disable axes)

Advanced settings

zOffset=0 loadOffset=0,0 showWarmUp=true loopAlways=false maxObjectHeight=200 maxScaleDifference=.1 quitOnEscape=true screenToMillimeterScale=.3 targetTemperature=230