3D printer
Type:
Dimensions:
x:
mm
y:
mm
z:
mm
Heated bed:
GCODE settings
Start:
End:
The following texts are replaced:
{printingTemp}
Printing temperature
{printingBedTemp}
Printing bed temperature
{preheatTemp}
Preheat temperature
{preheatBedTemp}
Preheat bed temperature
{printerType}
Printer type
{if heatedBed}
Enable line if printer has heated bed
Print settings
Layer height:
mm
Wall thickness:
mm
Filament thickness:
mm
Temperature:
degrees C
Bed temperature:
degrees C
Speed:
mm/s
Travel speed:
mm/s
Enable traveling:
First layer slow:
Use sub-layers*:
* Continuously move platform while printing instead of once per layer
Use retraction:
Retraction amount:
mm
Retraction min distance:
mm
Retraction speed:
mm/s
Auto preheat:
Preheat temperature:
Preheat bed temperature:
Doodle3D settings
Minimal line distance:
px
Pixels to mm scale:
Network settings
Connection type:
Access point mode
Client mode
Access point settings
Wi-Fi box ssid*:
* The text
%%MAC_ADDR_TAIL%%
will be replaced by the last 6 digits of your Doodle3D Wi-Fi box's MAC address.
Password:
Wi-Fi box IP address:
Wi-Fi box netmask:
When you can't connect to your device, you can always use an ethernet cable and go to
connect.doodle3d.com
.
Client mode settings
Wi-Fi box id*:
* Is used on
connect.doodle3d.com
.
The text
%%MAC_ADDR_TAIL%%
will be replaced by the last 6 digits of your Doodle3D Wi-Fi box's MAC address.
Network:
Password:
When you can't connect to your device, you can always use an ethernet cable and go to
connect.doodle3d.com
.
Update
Debug
Restore