save settings

js/SettingsPage.js

@@ -1,7 +1,7 @@
 /*
  * This file is part of the Doodle3D project (http://doodle3d.com).
  *
- * Copyright (c) 2013, Doodle3D
+ * Copyright (c) 2013-2017, Doodle3D
  * This software is licensed under the terms of the GNU GPL v2 or later.
  * See file LICENSE.txt or visit http://www.gnu.org/licenses/gpl.html for full license details.
  */
@@ -25,9 +25,8 @@
 	
 	var _self = this;
 
-	function updateFields() {
+	function showOrHideFields() {
-		var isHeatedBed = $("#chkBed").prop("checked");
+		if ($("#chkBed").prop("checked")) {
-		if (isHeatedBed) {
 			$("#grpBedTemp").show(); 
 		} else {
 			$("#grpBedTemp").hide();
@@ -42,19 +41,62 @@
 		$("#divSettings").hide();
 		d3d.util.showLoader();
 
-		$("#chkBed").on("change", function(data) {
+		$("#lstPrinters").on("change", function(data) {
-			updateFields();
+			var printerType = $(this).val();
+			
+			_configAPI.savePrinterType(printerType,function(successData) {
+				refreshSettings();
+			},function(failData) {
+				console.log("savePrinterType fail",failData);
+			});
+		});
+
+		$("#nozzleTemperature").on('slidestop', function( event ) { 
+			_configAPI.save({"printer.temperature":$(this).val()});
+		});
+
+		$("#nozzleTemperature").on('focusout', function( event ) { 
+			_configAPI.save({"printer.temperature":$(this).val()});
+		});
+
+		$("#bedTemperature").on('slidestop', function( event ) { 
+			_configAPI.save({"printer.bed.temperature":$(this).val()});
+		});
+
+		$("#bedTemperature").on('focusout', function( event ) { 
+			_configAPI.save({"printer.bed.temperature":$(this).val()});
 		});
 
 		$("#filamentThickness").on("change", function(data) {
-			console.log("filamentThickness change",$(this).val());
+			_configAPI.save({"printer.filamentThickness":$(this).val()});
 		});
 
-		$("#bedTemperature").on("change", function(data) {
+		$("#dimensionsX").on("change", function(data) {
-			console.log("bedTemperature change",$(this).val());
+			_configAPI.save({"printer.dimensions.x":$(this).val()});
+		});
+
+		$("#dimensionsY").on("change", function(data) {
+			_configAPI.save({"printer.dimensions.y":$(this).val()});
 		});
-	});
 	
+		$("#dimensionsZ").on("change", function(data) {
+			_configAPI.save({"printer.dimensions.z":$(this).val()});
+		});
+
+		$('#startgcode').on("change", function(data) {
+			_configAPI.save({"printer.startcode":$(this).val()});
+		});
+		
+		$('#endgcode').on("change", function(data) {
+			_configAPI.save({"printer.end":$(this).val()});
+		});
+
+		$("#chkBed").on("change", function(data) {
+			showOrHideFields();
+		});
+
+	});
+
 	$.mobile.document.on( "pagebeforeshow", PAGE_ID, function( event, data ) {
 		_pageData = d3d.util.getPageParams(PAGE_ID);
 		
@@ -68,7 +110,14 @@
 		_configAPI.init(boxURL);
 		_printerAPI.init(boxURL);
 
+		refreshSettings();
+	});
 
+	$.mobile.document.on( "pagebeforehide", PAGE_ID, function( event, data ) {
+	
+	});
+
+	function refreshSettings() {
 		_configAPI.loadAll(function(successData) {
 			var printerType = successData["printer.type"];
 			var printerStartGCode = successData["printer.startcode"];
@@ -93,7 +142,6 @@
 			$('#nozzleTemperature').val(nozzleTemperature);
 
 			_printerAPI.listAll(function(printers) {
-				console.log(PAGE_ID,'page init',data);
 				
 				$("#lstPrinters").empty();
 
@@ -106,9 +154,13 @@
 
 				$("#divSettings").show();
 				d3d.util.hideLoader();
+				showOrHideFields();
 
-			},function(failData) { //_printerAPI.listAll
+				$("#bedTemperature").slider("refresh");
-				console.log(PAGE_ID,'FAIL _printerAPI.listall',data);
+				$("#nozzleTemperature").slider("refresh");
+
+			},function(failData) {
+				console.log(PAGE_ID,'FAIL _printerAPI.listAll');
 				$.mobile.changePage("#boxes");
 				return;
 			});
@@ -118,12 +170,7 @@
 			$.mobile.changePage("#boxes");
 			return;
 		});
-		
+	}
-	});
-
-	$.mobile.document.on( "pagebeforehide", PAGE_ID, function( event, data ) {
-	
-	});
 
 })(window);
 

js/api/ConfigAPI.js

@@ -83,15 +83,22 @@ function ConfigAPI() {
 			success: function(response){
 				//console.log("ConfigAPI:save response: ",response);
 				if(response.status == "error" || response.status == "fail") {
-					if(failedHandler) failedHandler(response);
+					if (failedHandler) failedHandler(response);
 				} else {
-					completeHandler(response.data);
+					console.log("ConfigAPI.save",newSettings,response.data);
+					if (completeHandler) completeHandler(response.data);
 				}
 			}
 		}).fail(function() {
 			if(failedHandler) failedHandler();
 		});
 	};
+
+	this.savePrinterType =  function(printerType,completeHandler,failedHandler) {
+		var settings = {"printer.type": printerType};
+		this.save(settings,completeHandler,failedHandler);
+	};
+
 	this.resetAll = function(completeHandler,failedHandler) {
 		//console.log("ConfigAPI:resetAll");
 		$.ajax({

www/index.html

@@ -279,17 +279,7 @@
         
 	</div><!-- /header -->
 	<div id="divSettings" role="main" class="ui-content">
-        <!-- <p class="intro">test</p> -->
+        <p class="intro">Use this page to select which 3D-printer is connected to your Doodle3D WiFi-Box. By selecting a printer the default settings for this printer will be loaded. Values are saved automatically.</p>
-
-
-		<a href="index.html" data-icon="check" data-role="button" data-inline="true" data-theme="c">Save settings</a>
-			<!-- <div align="right"> -->
-				<!-- <a href="index.html" data-role="button" class="ui-btn-right ui-btn-inline">Save</a> -->
-			<!-- </div> -->
-			 <!-- data-theme="a" data-inline="true" -->
-
-<!-- <a href="#" class="ui-btn-right ui-btn-inline">Login</a> -->
-
 
 		<div data-role="collapsible" data-collapsed="false">
 
@@ -328,7 +318,7 @@
 
 			<div data-role="fieldcontain">
 				<label for="name">Filament thickness (mm):</label>
-		        <input type="number" id="filamentThickness" name="filamentThickness" data-mini="true"/>
+		        <input type="number" id="filamentThickness" name="filamentThickness" data-mini="true" step=".01" min="1.75" max="3.3"/>
 			</div>
 
 			<div data-role="fieldcontain">