mirror of
https://github.com/Doodle3D/doodle3d-firmware.git
synced 2024-06-26 03:21:22 +02:00
Easier subsection default system
This commit is contained in:
peteruithoven
parent
c23c8d9e7c
commit
33e58e5379
|
|
@ -100,23 +100,31 @@ M.printer_bed_width = {
|
|||
description = '',
|
||||
min = 0
|
||||
}
|
||||
|
||||
M.printer_bed_height = {
|
||||
default = 220,
|
||||
subSection = 'printer_type',
|
||||
type = 'int',
|
||||
description = '',
|
||||
min = 0
|
||||
}
|
||||
|
||||
local default_makerbot_startcode = '(**** CONFIGURATION MACROS ****)\n;@printer {printerType}\n;@enable progress\n(** This GCode was generated by ReplicatorG 0040 **)\n(* using Skeinforge (50) *)\n(* for a Dual headed Replicator 2 *)\n(* on 2013/10/27 15:07:27 (+0100) *)\n(**** start.gcode for Replicator 2X, single head ****)\nM103 (disable RPM)\nM73 P0 (enable build progress)\nG21 (set units to mm)\nG90 (set positioning to absolute)\nM104 S240 T0 (set extruder temperature) (temp updated by printOMatic)\nM140 S110 T0 (set HBP temperature)\n(**** begin homing ****)\nG162 X Y F2500 (home XY axes maximum)\nG161 Z F1100 (home Z axis minimum)\nG92 Z-5 (set Z to -5)\nG1 Z0.0 (move Z to "0")\nG161 Z F100 (home Z axis minimum)\nM132 X Y Z A B (Recall stored home offsets for XYZAB axis)\n(**** end homing ****)\nG1 X-141 Y-74 Z10 F3300.0 (move to waiting position)\nG130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)\nM6 T0 (wait for toolhead, and HBP to reach temperature)\nG130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)\nM108 R3.0 T0\nG0 X-141 Y-74 (Position Nozzle)\nG0 Z0.6 (Position Height)\nM108 R5.0 (Set Extruder Speed)\nM101 (Start Extruder)\nG4 P2000 (Create Anchor)\nG92 X0 Y0\nM106\n(**** end of start.gcode ****)'
|
||||
M.printer_startcode = {
|
||||
default = ';Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n;M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)',
|
||||
default_makerbot_generic = default_makerbot_startcode,
|
||||
default_makerbot_replicator2 = default_makerbot_startcode,
|
||||
default_makerbot_thingomatic = default_makerbot_startcode,
|
||||
type = 'string',
|
||||
subSection = 'printer_type',
|
||||
description = ''
|
||||
}
|
||||
|
||||
local default_makerbot_endcode = '(******* End.gcode*******)\nM73 P100 ( End build progress )\nG0 Z150 ( Send Z axis to bottom of machine )\nM18 ( Disable steppers )\nM104 S0 T0 ( Cool down the Right Extruder )\nG162 X Y F2500 ( Home XY endstops )\nM18 ( Disable stepper motors )\nM70 P5 ( We <3 Making Things!)\nM72 P1 ( Play Ta-Da song )\n(*********end End.gcode*******)'
|
||||
M.printer_endcode = {
|
||||
default = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n;M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)',
|
||||
default_makerbot_generic = default_makerbot_endcode,
|
||||
default_makerbot_replicator2 = default_makerbot_endcode,
|
||||
default_makerbot_thingomatic = default_makerbot_endcode,
|
||||
type = 'string',
|
||||
subSection = 'printer_type',
|
||||
description = ''
|
||||
|
|
|
|||
|
|
@ -1,52 +0,0 @@
|
|||
---
|
||||
-- This file contains all subsection default values
|
||||
-- The table names are used as configuration key names, where underscores ('`_`') may be used to denote semi-categories.
|
||||
-- The settings interface replaces periods ('`.`') by underscores so for instance `network.ap.address` will
|
||||
-- be translated to `network_ap_address`. Multi-word names should be notated as camelCase.
|
||||
--
|
||||
-- Valid fields for the tables are:
|
||||
--
|
||||
-- - _default_: the default value (used when the key is not set in UCI config)
|
||||
-- The configuration keys themselves document themselves rather well, hence they are not included in the generated documentation.
|
||||
--
|
||||
-- NOTE: the all-caps definitions should be changed into configuration keys, or moved to a better location.
|
||||
--
|
||||
local M = {}
|
||||
|
||||
-- Ultimaker
|
||||
M.ultimaker_printer_bed_width = {
|
||||
default = 420
|
||||
}
|
||||
M.ultimaker_printer_bed_height = {
|
||||
default = 420
|
||||
}
|
||||
M.ultimaker_printer_startcode = {
|
||||
default = ';Generated with Doodle3D (ultimaker)\nM109 S{printingTemp} ;set target temperature \n;M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)',
|
||||
}
|
||||
M.ultimaker_printer_endcode = {
|
||||
default = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n;M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)',
|
||||
}
|
||||
|
||||
-- Makerbot
|
||||
M.makerbot_generic_printer_startcode = {
|
||||
default = '(**** CONFIGURATION MACROS ****)\n;@printer {printerType}\n;@enable progress\n(** This GCode was generated by ReplicatorG 0040 **)\n(* using Skeinforge (50) *)\n(* for a Dual headed Replicator 2 *)\n(* on 2013/10/27 15:07:27 (+0100) *)\n(**** start.gcode for Replicator 2X, single head ****)\nM103 (disable RPM)\nM73 P0 (enable build progress)\nG21 (set units to mm)\nG90 (set positioning to absolute)\nM104 S240 T0 (set extruder temperature) (temp updated by printOMatic)\nM140 S110 T0 (set HBP temperature)\n(**** begin homing ****)\nG162 X Y F2500 (home XY axes maximum)\nG161 Z F1100 (home Z axis minimum)\nG92 Z-5 (set Z to -5)\nG1 Z0.0 (move Z to "0")\nG161 Z F100 (home Z axis minimum)\nM132 X Y Z A B (Recall stored home offsets for XYZAB axis)\n(**** end homing ****)\nG1 X-141 Y-74 Z10 F3300.0 (move to waiting position)\nG130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)\nM6 T0 (wait for toolhead, and HBP to reach temperature)\nG130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)\nM108 R3.0 T0\nG0 X-141 Y-74 (Position Nozzle)\nG0 Z0.6 (Position Height)\nM108 R5.0 (Set Extruder Speed)\nM101 (Start Extruder)\nG4 P2000 (Create Anchor)\nG92 X0 Y0\nM106\n(**** end of start.gcode ****)',
|
||||
}
|
||||
M.makerbot_generic_printer_endcode = {
|
||||
default = '(******* End.gcode*******)\nM73 P100 ( End build progress )\nG0 Z150 ( Send Z axis to bottom of machine )\nM18 ( Disable steppers )\nM104 S0 T0 ( Cool down the Right Extruder )\nG162 X Y F2500 ( Home XY endstops )\nM18 ( Disable stepper motors )\nM70 P5 ( We <3 Making Things!)\nM72 P1 ( Play Ta-Da song )\n(*********end End.gcode*******)',
|
||||
}
|
||||
|
||||
M.makerbot_replicator2_printer_startcode = {
|
||||
default = '(**** CONFIGURATION MACROS ****)\n;@printer {printerType}\n;@enable progress\n(** This GCode was generated by ReplicatorG 0040 **)\n(* using Skeinforge (50) *)\n(* for a Dual headed Replicator 2 *)\n(* on 2013/10/27 15:07:27 (+0100) *)\n(**** start.gcode for Replicator 2X, single head ****)\nM103 (disable RPM)\nM73 P0 (enable build progress)\nG21 (set units to mm)\nG90 (set positioning to absolute)\nM104 S240 T0 (set extruder temperature) (temp updated by printOMatic)\nM140 S110 T0 (set HBP temperature)\n(**** begin homing ****)\nG162 X Y F2500 (home XY axes maximum)\nG161 Z F1100 (home Z axis minimum)\nG92 Z-5 (set Z to -5)\nG1 Z0.0 (move Z to "0")\nG161 Z F100 (home Z axis minimum)\nM132 X Y Z A B (Recall stored home offsets for XYZAB axis)\n(**** end homing ****)\nG1 X-141 Y-74 Z10 F3300.0 (move to waiting position)\nG130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)\nM6 T0 (wait for toolhead, and HBP to reach temperature)\nG130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)\nM108 R3.0 T0\nG0 X-141 Y-74 (Position Nozzle)\nG0 Z0.6 (Position Height)\nM108 R5.0 (Set Extruder Speed)\nM101 (Start Extruder)\nG4 P2000 (Create Anchor)\nG92 X0 Y0\nM106\n(**** end of start.gcode ****)',
|
||||
}
|
||||
M.makerbot_replicator2_printer_endcode = {
|
||||
default = '(******* End.gcode*******)\nM73 P100 ( End build progress )\nG0 Z150 ( Send Z axis to bottom of machine )\nM18 ( Disable steppers )\nM104 S0 T0 ( Cool down the Right Extruder )\nG162 X Y F2500 ( Home XY endstops )\nM18 ( Disable stepper motors )\nM70 P5 ( We <3 Making Things!)\nM72 P1 ( Play Ta-Da song )\n(*********end End.gcode*******)',
|
||||
}
|
||||
|
||||
M.makerbot_thingomatic_printer_startcode = {
|
||||
default = '(**** CONFIGURATION MACROS ****)\n;@printer {printerType}\n;@enable progress\n(** This GCode was generated by ReplicatorG 0040 **)\n(* using Skeinforge (50) *)\n(* for a Dual headed Replicator 2 *)\n(* on 2013/10/27 15:07:27 (+0100) *)\n(**** start.gcode for Replicator 2X, single head ****)\nM103 (disable RPM)\nM73 P0 (enable build progress)\nG21 (set units to mm)\nG90 (set positioning to absolute)\nM104 S240 T0 (set extruder temperature) (temp updated by printOMatic)\nM140 S110 T0 (set HBP temperature)\n(**** begin homing ****)\nG162 X Y F2500 (home XY axes maximum)\nG161 Z F1100 (home Z axis minimum)\nG92 Z-5 (set Z to -5)\nG1 Z0.0 (move Z to "0")\nG161 Z F100 (home Z axis minimum)\nM132 X Y Z A B (Recall stored home offsets for XYZAB axis)\n(**** end homing ****)\nG1 X-141 Y-74 Z10 F3300.0 (move to waiting position)\nG130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)\nM6 T0 (wait for toolhead, and HBP to reach temperature)\nG130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)\nM108 R3.0 T0\nG0 X-141 Y-74 (Position Nozzle)\nG0 Z0.6 (Position Height)\nM108 R5.0 (Set Extruder Speed)\nM101 (Start Extruder)\nG4 P2000 (Create Anchor)\nG92 X0 Y0\nM106\n(**** end of start.gcode ****)',
|
||||
}
|
||||
M.makerbot_thingomatic_printer_endcode = {
|
||||
default = '(******* End.gcode*******)\nM73 P100 ( End build progress )\nG0 Z150 ( Send Z axis to bottom of machine )\nM18 ( Disable steppers )\nM104 S0 T0 ( Cool down the Right Extruder )\nG162 X Y F2500 ( Home XY endstops )\nM18 ( Disable stepper motors )\nM70 P5 ( We <3 Making Things!)\nM72 P1 ( Play Ta-Da song )\n(*********end End.gcode*******)',
|
||||
}
|
||||
|
||||
return M
|
||||
|
|
@ -140,10 +140,10 @@ end
|
|||
--- Looks up the table in @{subconf_defaults}.lua corresponding to a key.
|
||||
-- @string key The key for which to return the base table.
|
||||
-- @treturn table The base table for key, or nil if it does not exist.
|
||||
local function getSubBaseKeyTable(key)
|
||||
--[[local function getSubBaseKeyTable(key)
|
||||
local base = subconfig[key]
|
||||
return type(base) == 'table' and base.default ~= nil and base or nil
|
||||
end
|
||||
end]]--
|
||||
|
||||
|
||||
--- Returns the value of the requested key if it exists.
|
||||
|
|
@ -173,13 +173,11 @@ function M.get(key)
|
|||
log:info(" base.subSection: "..utils.dump(base.subSection))
|
||||
log:info(" section: "..utils.dump(section))
|
||||
log:info(" key: "..utils.dump(key))
|
||||
local subsectionBaseKey = section.."_"..key
|
||||
local subsectionBase = getSubBaseKeyTable(subsectionBaseKey)
|
||||
log:info(" subsection base key: "..utils.dump(subsectionBaseKey))
|
||||
log:info(" subsection base: "..utils.dump(subsectionKey))
|
||||
if subsectionBase ~= nil and subsectionBase.default ~= nil then
|
||||
log:info(" returning subsection base default: "..utils.dump(subsectionBase.default))
|
||||
return subsectionBase.default
|
||||
log:info(" subDefault key: "..utils.dump("default_"..section))
|
||||
local subDefault = base["default_"..section]
|
||||
if subDefault ~= nil then
|
||||
log:info(" returning subsection default: "..utils.dump(subDefault))
|
||||
return subDefault
|
||||
end
|
||||
end
|
||||
log:info(" returning default: "..utils.dump(base.default))
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user