Bed temperatures

src/conf_defaults.lua

@@ -98,7 +98,14 @@ M.printer_baudrate = {
 M.printer_temperature = {
 	default = 230,
 	type = 'int',
-	description = '3D printer temperature',
+	description = 'printing temperature',
+	min = 0
+}
+
+M.printer_bed_temperature = {
+	default = 70,
+	type = 'int',
+	description = 'printing bed temperature',
 	min = 0
 }
 
@@ -161,6 +168,12 @@ M.printer_heatup_temperature = {
 	description = ''
 }
 
+M.printer_heatup_bed_temperature = {
+	default = 70,
+	type = 'int',
+	description = ''
+}
+
 M.printer_retraction_enabled = {
 	default = true,
 	type = 'bool',
@@ -195,13 +208,13 @@ M.printer_enableTraveling = {
 }
 
 M.printer_startgcode = {
-	default = ';Generated with Doodle3D\nM109 S{printingTemp} ;set target temperature \nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle...   ;display message (20 characters to clear whole screen)',
+	default = ';Generated with Doodle3D\nM109 S{printingTemp} ;set target temperature \n;M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle...   ;display message (20 characters to clear whole screen)',
 	type = 'string',
 	description = ''
 }
 
 M.printer_endgcode = {
-	default = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 {preheatTemp}\nM117 Done                 ;display message (20 characters to clear whole screen)',
+	default = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n;M140 S{preheatBedTemp}\nM117 Done                 ;display message (20 characters to clear whole screen)',
 	type = 'string',
 	description = ''
 }

src/rest/api/api_printer.lua

@@ -119,10 +119,19 @@ function M.stop_POST(request, response)
 	
 	-- replacing {printingTemp} and {preheatTemp} in endgcode
 	local printingTemperature  	  = settings.get('printer.temperature')
+	local printingBedTemperature  = settings.get('printer.bed.temperature')
 	local preheatTemperature      = settings.get('printer.heatup.temperature')
+	local preheatBedTemperature   = settings.get('printer.heatup.bed.temperature')
 	local endGcode 				  = settings.get('printer.endgcode')
+	
+	--log:info("  printingBedTemperature: "..utils.dump(printingBedTemperature))
+	--log:info("  preheatBedTemperature: "..utils.dump(preheatBedTemperature))
+	--log:info("  endGcode : "..utils.dump(endGcode))
 	endGcode = string.gsub(endGcode,"{printingTemp}",printingTemperature)
+	endGcode = string.gsub(endGcode,"{printingBedTemp}",printingBedTemperature)
 	endGcode = string.gsub(endGcode,"{preheatTemp}",preheatTemperature)
+	endGcode = string.gsub(endGcode,"{preheatBedTemp}",preheatBedTemperature)
+	--log:info("  >endGcode : "..utils.dump(endGcode))
 	
 	local rv,msg = printer:stopPrint(endGcode)