vmario/doodle3d-firmware
0
0
Fork 0
mirror of https://github.com/Doodle3D/doodle3d-firmware.git synced 2024-12-22 02:53:49 +01:00
Code Issues Releases Wiki Activity

added ultimaker2go startcode end endcode

Browse Source 
this startcode and endcode displays status info on the Ultimaker 2go's screen: 'Doodle3D heat up', 'Doodle3D printing' and 'Doodle3D done'.
This commit is contained in:
Rick Companje 2016-05-21 16:47:52 +02:00
parent 89748e11aa
commit a723ecc711
1 changed files with 6 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
src/conf_defaults.lua
View File

@ -204,10 +204,12 @@ M.printer_filamentThickness = {
local default_makerbot_startcode = ';@printer {printerType}\nM136 (enable build)\nM73 P0 (Set build percentage to 0)\nG162 X Y F2000 (home XY axes to maximum)\nG161 Z F900 (home Z axis to minimum quick)\nG92 X0 Y0 Z0 A0 B0 (set axis positions to 0)\nG1 Z5.0 F900 (move Z axis down)\nG161 Z F100 (home Z axis to minimum more precise)\nG92 X0 Y0 Z0 A0 B0 (set axis positions to 0)\nG1 Z2.0 F900 (move Z axis to safety height)\nG1 X-264 Y-145 Z0 F3300.0 (move XY to start position)\nG92 X0 Y0 Z0 A0 B0 (set axis position to 0)\nG130 X20 Y20 A20 B20 (Lower stepper Vrefs while heating)\n{if heatedBed}M140 S{printingBedTemp} T0 (Set bed temp)\nM135 T0 (use first extruder)\nM104 S{printingTemp} T0 (set extruder temp)\nM133 T0 (Wait for extruder)\nG130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)\nG1 F100 A10 (extrude 10mm)\nG92 A0 (reset extruder)\nG0 Z20 (move up, to lose filament)'
local default_deltabot_startcode = ';Generated with Doodle3D (deltabot)\nM109 S{printingTemp} ;set target temperature\n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 ; move to home\nG92 E0 ;zero the extruded length\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)'
local default_ultimaker2_startcode = ';Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n'
local default_ultimaker2go_startcode = ';Generated with Doodle3D (ultimaker2go)\nM10000\nM10000\nM10001 X8 Y28 SDoodle3D heat up...\nM109 S{printingTemp} ;set target temperature \nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM10000\nM10000\nM10001 X8 Y28 SDoodle3D printing...\n'
M.printer_startcode = {
default = ';Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)',
default_ultimaker2 = default_ultimaker2_startcode,
default_ultimaker2go = default_ultimaker2_startcode,
default_ultimaker2go = default_ultimaker2go_startcode,
default__3Dison_plus = ';@printer {printerType}\nM136 (enable build)\nM73 P0\nG21\nG90\nM103\n;M109 S50 T0\nM140 S50 T0\nM104 S{printingTemp} T0\n;M134 T0\nM135 T0\nM104 S{printingTemp} T0\nG162 X Y F2000(home XY axes maximum)\nG161 Z F900(home Z axis minimum)\nG92 X113.5 Y74 Z-5 A0 B0 (set Z to -5)\nG1 Z0.0 F900(move Z to 0)\nG161 Z F100(home Z axis minimum)\nM132 X Y Z A B (Recall stored home offsets for XYZAB axis)\nG1 Z50 F3300\nG130 X20 Y20 A20 B20 (Lower stepper Vrefs while heating)\nM133 T0\nM6 T0\nG130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)\nG0 Z0.2 F3000\nG1 Z0 F100 A10 ;extrude 10mm\nG92 X227 Y148 Z0 A0 ;reset again\nG1 X227 Y148 Z0',
default_makerbot_generic = default_makerbot_startcode,
default_makerbot_replicator2 = default_makerbot_startcode,
@ -225,10 +227,12 @@ M.printer_startcode = {
local default_makerbot_endcode = 'G92 A0 B0 ;reset extruder position to prevent retraction\nM18 A B(Turn off A and B Steppers)\nG162 Z F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\n{if heatedBed}M140 S{preheatBedTemp} T0\nM104 S{preheatTemp} T0\nM72 P1 ( Play Ta-Da song )\nM137 (build end notification)'
local default_deltabot_endcode = 'M107 ;fan offG91 ;relative positioningG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressureG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even moreG28 ;move to homeM84 ;disable axes / steppersG90 ;absolute positioningM109 S0 ; hot end off{if heatedBed}M140 S{preheatBedTemp}M117 Done ;display message (20 characters to clear whole screen)'
local default_ultimaker2_endcode = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)'
local default_ultimaker2go_endcode = 'M10000\nM10000\nM10001 X20 Y28 SDoodle3D done!\nM107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n'
M.printer_endcode = {
default = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)',
default_ultimaker2 = default_ultimaker2_endcode,
default_ultimaker2go = default_ultimaker2_endcode,
default_ultimaker2go = default_ultimaker2go_endcode,
default__3Dison_plus = 'M73 P100\nG92 A0 B0 ;reset extruder position to prevent retraction\nM18 A B(Turn off A and B Steppers)\nG1 Z155 F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\nM140 S35 T0\nM104 S180 T0\nM73 P100 (end build progress )\nM72 P1 ( Play Ta-Da song )\nM137 (build end notification)\n',
default_makerbot_generic = default_makerbot_endcode,
default_makerbot_replicator2 = default_makerbot_endcode,