Fix return values in printer api.

Pass along chunk metadata in printer api.
Move wifi station mode check from main.lua to signin.lua so it is always run past.
Only log postresponsequeue if it is not empty.

Conflicts:
	src/rest/api/api_printer.lua

src/main.lua

@@ -254,9 +254,6 @@ local function main(environment)
 	elseif rq:getRequestMethod() == 'CMDLINE' and rq:get('signin') ~= nil then
 		log:info(MOD_ABBR, "Running in signin mode")
 
-		local ds = wifi.getDeviceState()
-		log:info(MOD_ABBR, "  wifi deviceState.mode: "..util.dump(ds.mode))
-		if ds.mode == "sta" then
 		log:info(MOD_ABBR, "  attempting signin")
 		local success,msg = Signin.signin()
 		if success then
@@ -264,7 +261,6 @@ local function main(environment)
 		else
 			log:warning(MOD_ABBR, "Signin failed: "..util.dump(msg))
 		end
-		end
 	elseif rq:getRequestMethod() ~= 'CMDLINE' or confDefaults.DEBUG_API then
 		-- Note: the commented log statement will print too many data if it's for instance dumping a gcode add request
 		--log:info(MOD_ABBR, "received request of type " .. rq:getRequestMethod() .. " for " .. (rq:getRequestedApiModule() or "<unknown>")
@@ -280,7 +276,6 @@ local function main(environment)
 
 		if err ~= nil then log:error(MOD_ABBR, err) end
 		response:send()
-
 		response:executePostResponseQueue()
 	else
 		log:info(MOD_ABBR, "Nothing to do...bye.\n")

src/network/netconfig.lua

@@ -409,6 +409,7 @@ function M.associateSsid(ssid, passphrase, recreate)
 
 	return true
 end
+
 --- Disassociate wlan device as client from all SSID's.
 -- Note: this function might belong in the wlanconfig module but that would introduce
 -- a circular dependency, easiest solution is to place the function here.

src/network/signin.lua

@@ -28,15 +28,21 @@ local SIGNING_IN_STATUS 	= 2
 --- Signin to connect.doodle3d.com server
 --
 function M.signin()
-
-	--log:verbose(MOD_ABBR, "signin:signin");
+	log:verbose(MOD_ABBR, "signin:signin");
 
 	local code, msg = M.getStatus()
 	--log:verbose(MOD_ABBR, "  status: "..utils.dump(code).." "..utils.dump(msg));
 
 	-- if we are already signin in, skip
 	if(code == SIGNING_IN_STATUS) then
-		log:verbose(MOD_ABBR, "  skipping signin")
+		log:verbose(MOD_ABBR, "  already signing in, skipping")
+		return
+	end
+
+	local ds = wifi.getDeviceState()
+	log:verbose(MOD_ABBR, "  wifi deviceState.mode: "..utils.dump(ds.mode))
+	if ds.mode ~= "sta" then
+		log:verbose(MOD_ABBR, "  wifi not in station mode, skipping signin")
 		return
 	end
 

src/rest/api/api_info.lua

@@ -160,7 +160,7 @@ function M.access(request, response)
 	response:setSuccess()
 	response:addData('has_control', hasControl)
 
-	return true
+	return
 end
 
 function M.status(request, response)

src/rest/api/api_printer.lua

@@ -5,6 +5,7 @@
 -- @license This software is licensed under the terms of the GNU GPL v2 or later.
 -- See file LICENSE.txt or visit http://www.gnu.org/licenses/gpl.html for full license details.
 
+-- TODO: return errors like in print_POST (error message in a 'msg' key instead of directly in the response) if this does not break API compatibility
 
 local lfs = require('lfs')
 local log = require('util.logger')
@@ -28,7 +29,7 @@ end
 function M.temperature(request, response)
 	local argId = request:get("id")
 	local printer,msg = printerUtils.createPrinterOrFail(argId, response)
-	if not printer or not printer:hasSocket() then return false end
+	if not printer or not printer:hasSocket() then return end
 
 	local temperatures,msg = printer:getTemperatures()
 
@@ -39,18 +40,18 @@ function M.temperature(request, response)
 		response:addData('hotend_target', temperatures.hotend_target)
 		response:addData('bed', temperatures.bed)
 		response:addData('bed_target', temperatures.bed_target)
+	elseif temperatures == false then
+		response:addData('status', msg)
+		response:setFail()
 	else
 		response:setError(msg)
-		return false;
 	end
-
-	return true;
 end
 
 function M.progress(request, response)
 	local argId = request:get("id")
 	local printer,msg = printerUtils.createPrinterOrFail(argId, response)
-	if not printer or not printer:hasSocket() then return false end
+	if not printer or not printer:hasSocket() then return end
 
 	-- NOTE: despite their names, `currentLine` is still the error indicator and `bufferedLines` the message in such case.
 	local currentLine,bufferedLines,totalLines = printer:getProgress()
@@ -61,15 +62,16 @@ function M.progress(request, response)
 		response:addData('current_line', currentLine)
 		response:addData('buffered_lines', bufferedLines)
 		response:addData('total_lines', totalLines)
+	elseif progress == false then
+		response:addData('status', bufferedLines)
+		response:setFail()
 	else
 		response:setError(bufferedLines)
-		return false
 	end
-
-	return true;
 end
 
--- NOTE: onlyReturnState is optional and prevents response from being modified, used when calling from within other api call
+-- Note: onlyReturnState is optional and prevents response from being modified, used when calling from within other api call
+-- Note: unlike regular API-functions, this one returns either true+state or false
 function M.state(request, response, onlyReturnState)
 	local argId = request:get("id")
 	if not onlyReturnState then response:addData('id', argId) end
@@ -98,19 +100,19 @@ function M.state(request, response, onlyReturnState)
 				response:addData('state', rv)
 			end
 			return true, rv
-		else
+		else -- Note: do not differentiate between false and nil here, false should never be returned
 			if not onlyReturnState then response:setError(msg) end
 			return false
 		end
 	end
-	return true
+
+	--this point cannot be reached, no return necessary
 end
 
 -- retrieve a list of 3D printers currently supported
 function M.listall(request, response)
 	response:setSuccess()
 	response:addData('printers', printerUtils.supportedPrinters())
-	return true
 end
 
 
@@ -130,13 +132,17 @@ function M.heatup_POST(request, response)
 	local rv,msg = printer:heatup(temperature)
 
 	response:addData('id', argId)
-	if rv then response:setSuccess()
-	else response:setFail(msg)
+	if rv then
+		response:setSuccess()
+	elseif rv == false then
+		response:addData('status', msg)
+		response:setFail()
+	else
+		response:setError(msg)
 	end
 end
 
 function M.stop_POST(request, response)
-
 	log:info(MOD_ABBR, "API:printer/stop")
 
 	if not accessManager.hasControl(request.remoteAddress) then
@@ -147,7 +153,7 @@ function M.stop_POST(request, response)
 	local argId = request:get("id")
 	local argGcode = request:get("gcode")
 	local printer,msg = printerUtils.createPrinterOrFail(argId, response)
-	if not printer or not printer:hasSocket() then return false end
+	if not printer or not printer:hasSocket() then return end
 
 	if(argGcode == nil) then
 		argGcode = ""
@@ -155,8 +161,13 @@ function M.stop_POST(request, response)
 	local rv,msg = printer:stopPrint(argGcode)
 
 	response:addData('id', argId)
-	if rv then response:setSuccess()
-	else response:setError(msg)
+	if rv then
+		response:setSuccess()
+	elseif rv == false then
+		response:addData('status', msg)
+		response:setFail()
+	else
+		response:setError(msg)
 	end
 end
 
@@ -164,6 +175,8 @@ end
 --accepts: id(string) (the printer ID to append to)
 --accepts: first(bool) (chunks will be concatenated but output file will be cleared first if this argument is true)
 --accepts: start(bool) (only when this argument is true will printing be started)
+--accepts: seq_number(int) (sequence number of the chunk, must be given until clear() after given once, and incremented each time)
+--accepts: seq_total(int) (total number of gcode chunks to be appended, must be given until clear() after given once, and stay the same)
 --returns: when the gcode buffer cannot accept the gcode, or the IPC transaction fails, a fail with a (formal, i.e., parseable) status argument will be returned
 function M.print_POST(request, response)
 	log:info(MOD_ABBR, "API:printer/print")
@@ -187,9 +200,12 @@ function M.print_POST(request, response)
 	local argGcode = request:get("gcode")
 	local argIsFirst = utils.toboolean(request:get("first"))
 	local argStart = utils.toboolean(request:get("start"))
+	local argSeqNumber = request:get("seq_number") or -1
+	local argSeqTotal = request:get("seq_total") or -1
+	local remoteHost = request:getRemoteHost()
 
 	local printer,msg = printerUtils.createPrinterOrFail(argId, response)
-	if not printer or not printer:hasSocket() then return false end
+	if not printer or not printer:hasSocket() then return end
 
 	response:addData('id', argId)
 
@@ -203,7 +219,10 @@ function M.print_POST(request, response)
 		response:addData('gcode_clear',true)
 		local rv,msg = printer:clearGcode()
 
-		if not rv then
+		if rv == false then
+			response:addData('status', msg)
+			response:setFail("could not clear gcode")
+		elseif rv == nil then
 			response:setError(msg)
 			return
 		end
@@ -211,14 +230,17 @@ function M.print_POST(request, response)
 
 	local rv,msg
 
-	-- TODO: return errors with a separate argument like here in the rest of the code (this is how we designed the API right?)
-	rv,msg = printer:appendGcode(argGcode)
+	rv,msg = printer:appendGcode(argGcode, { seq_number = argSeqNumber, seq_total = argSeqTotal, source = remoteHost })
 	if rv then
 		--NOTE: this does not report the number of lines, but only the block which has just been added
 		response:addData('gcode_append',argGcode:len())
+	elseif rv == false then
+		response:addData('status', msg)
+		response:setFail("could not add gcode")
+		return
 	else
-		response:setError("could not add gcode")
 		response:addData('msg', msg)
+		response:setError("could not add gcode")
 		return
 	end
 
@@ -228,9 +250,14 @@ function M.print_POST(request, response)
 		if rv then
 			response:setSuccess()
 			response:addData('gcode_print',true)
+		elseif rv == false then
+			response:addData('status', msg)
+			response:setFail("could not send gcode")
+			return
 		else
-			response:setError("could not send gcode")
 			response:addData('msg', msg)
+			response:setError("could not send gcode")
+			return
 		end
 	else
 		response:setSuccess()

src/rest/response.lua

@@ -132,7 +132,7 @@ end
 
 --- Call all functions on the post-response queue, see @{M:addPostResponseFunction} for details and a side-note.
 function M:executePostResponseQueue()
-	log:verbose(MOD_ABBR, "Response:executePostResponseQueue: " .. utils.dump(self.postResponseQueue))
+	if #self.postResponseQueue > 0 then log:verbose(MOD_ABBR, "Response:executePostResponseQueue: " .. utils.dump(self.postResponseQueue)) end
 
 	for i,fn in ipairs(self.postResponseQueue) do fn() end
 end