vmario/doodle3d-firmware
0
0
Fork 0
mirror of https://github.com/Doodle3D/doodle3d-firmware.git synced 2024-11-14 17:57:57 +01:00
Code Issues Releases Wiki Activity

updated ultimaker2 startcode and endcode

Browse Source 
It now shows status info 'Doodle3D heat up...', 'Doodle3D printing...' and 'Doodle3D done!' on the display of the Ultimaker 2 (and 2go, extended etc, plus etc)

I've tested this on my Ultimaker 2go today by changing the startcode and endcode from the Doodle3D settings screen. I have not tested this yet after adjusting the `conf_defaults.lua`.
This commit is contained in:
Rick Companje 2016-05-21 21:31:41 +02:00
parent 1c88c17390
commit edf1ed5577
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
src/conf_defaults.lua
View File

@ -203,7 +203,7 @@ M.printer_filamentThickness = {
local default_makerbot_startcode = ';@printer {printerType}\nM136 (enable build)\nM73 P0 (Set build percentage to 0)\nG162 X Y F2000 (home XY axes to maximum)\nG161 Z F900 (home Z axis to minimum quick)\nG92 X0 Y0 Z0 A0 B0 (set axis positions to 0)\nG1 Z5.0 F900 (move Z axis down)\nG161 Z F100 (home Z axis to minimum more precise)\nG92 X0 Y0 Z0 A0 B0 (set axis positions to 0)\nG1 Z2.0 F900 (move Z axis to safety height)\nG1 X-264 Y-145 Z0 F3300.0 (move XY to start position)\nG92 X0 Y0 Z0 A0 B0 (set axis position to 0)\nG130 X20 Y20 A20 B20 (Lower stepper Vrefs while heating)\n{if heatedBed}M140 S{printingBedTemp} T0 (Set bed temp)\nM135 T0 (use first extruder)\nM104 S{printingTemp} T0 (set extruder temp)\nM133 T0 (Wait for extruder)\nG130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)\nG1 F100 A10 (extrude 10mm)\nG92 A0 (reset extruder)\nG0 Z20 (move up, to lose filament)' local default_makerbot_startcode = ';@printer {printerType}\nM136 (enable build)\nM73 P0 (Set build percentage to 0)\nG162 X Y F2000 (home XY axes to maximum)\nG161 Z F900 (home Z axis to minimum quick)\nG92 X0 Y0 Z0 A0 B0 (set axis positions to 0)\nG1 Z5.0 F900 (move Z axis down)\nG161 Z F100 (home Z axis to minimum more precise)\nG92 X0 Y0 Z0 A0 B0 (set axis positions to 0)\nG1 Z2.0 F900 (move Z axis to safety height)\nG1 X-264 Y-145 Z0 F3300.0 (move XY to start position)\nG92 X0 Y0 Z0 A0 B0 (set axis position to 0)\nG130 X20 Y20 A20 B20 (Lower stepper Vrefs while heating)\n{if heatedBed}M140 S{printingBedTemp} T0 (Set bed temp)\nM135 T0 (use first extruder)\nM104 S{printingTemp} T0 (set extruder temp)\nM133 T0 (Wait for extruder)\nG130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)\nG1 F100 A10 (extrude 10mm)\nG92 A0 (reset extruder)\nG0 Z20 (move up, to lose filament)'
local default_deltabot_startcode = ';Generated with Doodle3D (deltabot)\nM109 S{printingTemp} ;set target temperature\n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 ; move to home\nG92 E0 ;zero the extruded length\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)' local default_deltabot_startcode = ';Generated with Doodle3D (deltabot)\nM109 S{printingTemp} ;set target temperature\n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 ; move to home\nG92 E0 ;zero the extruded length\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)'
local default_ultimaker2_startcode = ';Generated with Doodle3D (ultimaker2)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)\n' local default_ultimaker2_startcode = ';Generated with Doodle3D (ultimaker2)\nM10000\nM10000\nM10001 X8 Y28 SDoodle3D heat up...\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 ; home to endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\nM10000\nM10000\nM10001 X8 Y28 SDoodle3D printing...\n'
M.printer_startcode = { M.printer_startcode = {
default = ';Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)', default = ';Generated with Doodle3D (default)\nM109 S{printingTemp} ;set target temperature \n{if heatedBed}M190 S{printingBedTemp} ;set target bed temperature\nG21 ;metric values\nG91 ;relative positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG92 E0 ;zero the extruded length again\nG1 F9000\nG90 ;absolute positioning\nM117 Printing Doodle... ;display message (20 characters to clear whole screen)',
default_ultimaker2 = default_ultimaker2_startcode, default_ultimaker2 = default_ultimaker2_startcode,
@ -224,7 +224,7 @@ M.printer_startcode = {
local default_makerbot_endcode = 'G92 A0 B0 ;reset extruder position to prevent retraction\nM18 A B(Turn off A and B Steppers)\nG162 Z F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\n{if heatedBed}M140 S{preheatBedTemp} T0\nM104 S{preheatTemp} T0\nM72 P1 ( Play Ta-Da song )\nM137 (build end notification)' local default_makerbot_endcode = 'G92 A0 B0 ;reset extruder position to prevent retraction\nM18 A B(Turn off A and B Steppers)\nG162 Z F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\n{if heatedBed}M140 S{preheatBedTemp} T0\nM104 S{preheatTemp} T0\nM72 P1 ( Play Ta-Da song )\nM137 (build end notification)'
local default_deltabot_endcode = 'M107 ;fan offG91 ;relative positioningG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressureG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even moreG28 ;move to homeM84 ;disable axes / steppersG90 ;absolute positioningM109 S0 ; hot end off{if heatedBed}M140 S{preheatBedTemp}M117 Done ;display message (20 characters to clear whole screen)' local default_deltabot_endcode = 'M107 ;fan offG91 ;relative positioningG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressureG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even moreG28 ;move to homeM84 ;disable axes / steppersG90 ;absolute positioningM109 S0 ; hot end off{if heatedBed}M140 S{preheatBedTemp}M117 Done ;display message (20 characters to clear whole screen)'
local default_ultimaker2_endcode = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)' local default_ultimaker2_endcode = 'M10000\nM10000\nM10001 X20 Y28 SDoodle3D done!\nM107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 ;home the printer\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\n'
M.printer_endcode = { M.printer_endcode = {
default = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)', default = 'M107 ;fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;disable axes / steppers\nG90 ;absolute positioning\nM104 S{preheatTemp}\n{if heatedBed}M140 S{preheatBedTemp}\nM117 Done ;display message (20 characters to clear whole screen)',
default_ultimaker2 = default_ultimaker2_endcode, default_ultimaker2 = default_ultimaker2_endcode,