Olaf van der Kruk
777a6a01dc
Update README.md
2016-04-12 11:45:14 +02:00
Olaf van der Kruk
198a7024f9
Update README.md
...
Added small readme of the command line interface
2016-04-12 11:44:50 +02:00
peteruithoven
e384ac4782
Merge branch 'develop' of github.com:Doodle3D/doodle3d-firmware into develop
2016-01-12 12:42:31 +01:00
peteruithoven
bd5a304504
Publish script comments update
2016-01-12 12:03:53 +01:00
peteruithoven
95ea3a1059
0.10.9 version and release notes
2016-01-11 12:31:40 +01:00
peteruithoven
fd1a428aea
0.10.8 version and release notes
2016-01-11 12:02:26 +01:00
Wouter R
37f833aec1
Print skipped files when adding copyright notices.
...
Remove old script.
2016-01-08 23:24:03 +01:00
peteruithoven
3a3abb9c55
Changelog update
2016-01-07 13:09:15 +01:00
Wouter R
718e2a314d
Bump firmware version to 0.10.8-b.
2016-01-06 19:27:25 +01:00
Wouter R
b70a008cdf
Add setting for enabling traveling in bottom layers.
2016-01-06 19:26:31 +01:00
Wouter R
210f17377f
Fix uci-defaults script to exit with value 0.
2016-01-06 17:25:54 +01:00
Wouter R
8a726552f7
Map print3d log level 'info' to firmware level 'warn' to reduce amount of logging under normal circumstances.
2016-01-06 15:01:01 +01:00
Wouter R
f51e63e06a
Add new settings key 'system.log.level' with print3d log levels.
...
Change uci-defaults script to make sure the new setting exists in UCI and the old one is removed.
Read new log level key in firmware and map it to firmware log level.
2016-01-06 13:23:25 +01:00
Rick Companje
d66d976af1
updated version and release notes
2015-11-11 20:50:29 +01:00
peteruithoven
0716fc22c9
Version and releasenotes update for 0.10.7
2015-08-21 16:00:22 +02:00
peteruithoven
860897d988
Rename Colido 2.0 Plus
2015-08-21 15:39:32 +02:00
peteruithoven
98c1ba6b8b
Added ColiDo printer profiles
2015-08-21 13:59:38 +02:00
peteruithoven
09a6c6a928
Merge branch 'develop'
2015-06-17 14:28:25 +02:00
peteruithoven
5979eb841a
updated version and release notes for 0.10.6
2015-06-17 14:12:21 +02:00
peteruithoven
b26b7376ca
updated version and release notes for 0.10.6-rc3
2015-06-17 13:32:50 +02:00
peteruithoven
6038eac72a
Adapted release script to new buildroot system
2015-06-17 13:31:23 +02:00
peteruithoven
fd167ee11e
0.10.6-rc2 version and release notes
2015-06-16 16:50:31 +02:00
peteruithoven
eedc6d3c6b
Update network status after boot when no action was needed
...
When it already was connected to a WiFi network or it already was a
access point.
2015-06-16 16:49:18 +02:00
peteruithoven
2d0254dc1e
Manual line breaks in release notes
2015-06-16 16:48:05 +02:00
peteruithoven
4c033a6215
Version and Releasenotes update
2015-06-16 12:19:27 +02:00
peteruithoven
cb6ddf9900
Fixed concatenation of empty unformattedSsid
2015-06-15 17:08:09 +02:00
peteruithoven
93e2ce1cb7
Increate wifibox timeout
...
Also see: https://github.com/Doodle3D/doodle3d-firmware/issues/32
2015-06-15 15:08:17 +02:00
Arne Boon
92ea5faceb
fix: ultimaker2go startcode and endcode inherit from ultimaker2 startcode (plus quotes replace on makerbot startcode)
2015-06-15 14:03:28 +02:00
peteruithoven
4ca599e962
ID generation logging
2015-06-15 10:37:51 +02:00
peteruithoven
6a546bcca5
Removing wifi channel setting #28
2015-06-12 16:02:35 +02:00
peteruithoven
2ff4080ea4
Removing custom wifi country #28
2015-06-12 16:01:39 +02:00
peteruithoven
067689d64b
WiFi related logging
2015-06-12 14:46:38 +02:00
Arne Boon
df4f1702a9
adjust default makerbot endcode: move z downwards after print. safer choice. wanhao shows that head travels through print, print is z lifted when stopping.
2015-06-10 17:50:05 +02:00
Arne Boon
0b2eb5d230
add wanhao duplicator 4 printer type and configuration (heated bed, xyz, filament, startcode, endcode)
2015-06-10 17:48:09 +02:00
peteruithoven
798031f9cd
Comments on settings system
2015-06-09 17:13:30 +02:00
Arne Boon
d75d1402bc
feature: filament thickness default settings per printer type
2015-06-09 17:11:02 +02:00
Arne Boon
8318bd265c
add doodle dream printer type
2015-06-09 16:13:58 +02:00
Arne Boon
84f244b8d7
doodle dream config settings
2015-06-09 16:12:56 +02:00
Arne Boon
798f9bcf80
decrease max z (tested a print of 115. the nozzle scraps the top when traveling home after print. giving 3mm space for a safe travel home)
2015-06-08 16:11:44 +02:00
Arne Boon
3e2cac9c62
add ultimaker 2 go settings to supported printers
2015-06-08 15:34:07 +02:00
Arne Boon
d30dc8fe31
undo doodle dream implementation: first fully implement the filament thickness ( https://github.com/Doodle3D/doodle3d-client/issues/284 )
2015-06-08 11:52:23 +02:00
peteruithoven
7f56af0dfc
Remove custom filament thickness
...
We don’t support custom filament thickness per printer on the client
yet. https://github.com/Doodle3D/doodle3d-client/issues/162
2015-06-03 11:56:37 +02:00
peteruithoven
d9fc8a5d79
Merge branch 'master' into develop
2015-06-03 11:51:57 +02:00
Arne Boon
623f28f71a
adjust doodle dream filament thickness to 1.75
2015-05-27 17:59:44 +02:00
Arne Boon
4a054f5d5f
support for lulzbot taz 4 and doodle dream printer
2015-05-27 17:53:53 +02:00
Rick Companje
027f803d54
updated ReleaseNotes and version
2015-02-02 20:16:15 +01:00
Rick Companje
6e5eb097b8
increased the value of rsync_timeout in publish-wifibox-release
2015-02-02 17:28:57 +01:00
Rick Companje
54a0032a55
firmware version
2014-12-19 21:13:36 +01:00
Rick Companje
b840938cbc
updated release notes and sketch api
2014-12-19 16:10:42 +01:00
Rick Companje
4b1476100a
updated version info
2014-10-10 11:08:46 +02:00
