First attempt at resturcturing wiki.

1.-The-Doodle3D-Wifibox/1.2-Planning-Overview.md

@@ -0,0 +1 @@
+(functionality breakdown / milestones)

1.-The-Doodle3D-Wifibox/1.3-Resources.md

@@ -0,0 +1 @@
+(repo, wiki, general resources like openwrt website etc.)

2.-Firmware/2.1-Overview.md

@@ -1,5 +1,7 @@
 # Outline of the WifiBox project
 
+*TO ADD*: (openwrt-based, components:luacgi(+uci)+www-iface+init.d)
+
 Consider this a sketch, including some ideas which might never end up in the final application.
 
  * Printer driver interface

Appendices/A1.-Building-OpenWrt.md

@@ -0,0 +1,58 @@
+Set up OpenWRT on OSX
+---------------------
+
+Building was relatively easy in my case (Snow Leopard), but this might differ depending on OS/versions/etc. The guide I followed (roughly) is <http://thismachinechills.blogspot.nl/2013/02/installing-macports-with-openwrt.html>. I got along fine with only following these steps+notes:
+
+- Install required macports dependencies...for me, Xcode's gcc worked just fine...so maybe that step can be left out.
+- However, the longer list of ports just below must be installed or you will get missing dependencies during 'make prereq'.
+- Create a case-sensitive HFS+ sparse image (10GB will do nicely).
+- Fetch openwrt through svn and update feeds (aka packages).
+- If you'd like all packages available for building in 'make menuconfig', run: 'scripts/feeds install -a'.
+- build! (e2fsprogs worked fine for me but I'm not using Lion so...?)
+
+Further notes:
+
+- deselect everything but SquashFS under 'Target images' (e.g. jffs2 is not needed)
+- under 'Target profile', for the TP-Link box, only select your specific model (scroll way down)
+- I think luci must be enabled in menuconfig (under 'Luci'->Collections...)
+- when flashing a new image, the sysupgrade one will do fine except the very first time (according to openwrt docs)
+- enabling some drivers can only be done by modifying the kernel? (make kernelconfig)
+- keep track of packages and features (de)selected in menuconfig (or modify by hand...)
+- prefix path with macports path: 'export PATH=/opt/local/bin:$PATH'
+- If the make system keeps complaining about outdated svn repo/executable versions, this seems not to be a problem
+- wr703n reverse engineered <http://dangerousprototypes.com/2012/10/10/reverse-engineering-layout-of-tp-link-tl-wr703n-802-11n-router/>
+- To get the new image on a device, follow this guide <http://wiki.openwrt.org/doc/howto/generic.sysupgrade> after getting the image on the device (copy it to /tmp). A warning 'Error fixing up TRX header' seems quite harmless.
+- In case you end up with a broken ssh session, don't forget you can quit ssh by typing '~.' (on an empty line so hit enter before to be sure).
+
+
+Various guides / links
+======================
+- WR703N openWRT setup: <http://wiki.xinchejian.com/wiki/Install_OpenWRT_on_TPlink_WR703N>
+- WR703N wlan config: <http://companje.nl/doku.php?id=/openwrt>
+- (osx cross-compile) <http://www.hsmm-mesh.org/hsmm-mesh-forums/view-postlist/forum-1-general/topic-12-building-openwrt-on-os-x.html>
+- (osx cross-compile) <https://forum.openwrt.org/viewtopic.php?id=34676>
+- (cross compile eigen code) <http://wiki.openwrt.org/doc/devel/crosscompile>
+- (cross compile eigen code) <http://hype-free.blogspot.nl/2009/04/compiling-software-for-openwrt-and.html>
+- (eclipse setup) <http://downloads.openwrt.org/docs/eclipse.pdf>
+- Hardware extension (2 more USB ports) <http://www.kean.com.au/oshw/WR703N/>
+- Mouse support (not a solution to the USB1 issue) <http://santiago-saldana.blogspot.nl/2010/01/mouse-working-in-openwrt.html>
+- (GENERAL) run make using CPU idle time only, found here: http://wiki.openwrt.org/doc/howto/build
+  $ ionice -c 3 nice -n19 make -j 2
+
+
+Build environment
+=================
+A script (possibly buggy) to set appropiate variables for cross-compiling openwrt code for the tp-link wr703n router. It assumes your image is called 'openWRT-build-fs-10GB'.  
+Source the script to modify current shell environment (using regular execution runs it in a temporary subshell).
+
+	cat<<EOF>set-openwrt-build-env
+	#!/bin/sh
+	
+	export PATH=/opt/local/bin:$PATH:/Volumes/openWRT-build-fs-10GB/trunk/staging_dir/toolchain-	mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/bin
+	export STAGING_DIR=/Volumes/openWRT-build-fs-10GB/trunk/staging_dir
+	export CC=mips-openwrt-linux-uclibc-gcc
+	export LD=mips-openwrt-linux-uclibc-ld
+	
+	#this is used to pass to configure --target
+	export TGT_MIPS=mips-openwrt-linux-uclibc
+	EOF

Home.md

@@ -10,15 +10,4 @@ A number of milestones have been created in the issue tracker. Bitbucket sorts t
 - (0_IP_2)	Second development milestone, same as 0_IP_1 but in a larger scope.
 - (0_IP_n)	Nth development milestone, at some point one has to be defined at which all core functionality is present and working reasonably well.
 - (1.0)		First release version.
-- (Later)	Indeterminate, but nonetheless wirthwhile implementing at some point.
-
-## Pages on this wiki
-
-[Building OpenWrt](wiki/BuildOpenwrt)  
-[Analyzing uhttpd crashes](wiki/UhttpdCrash)  
-[Outline for self-update functionality](wiki/SelfUpdater)  
-[Miscellaneous notes](wiki/MiscNotes)  
-[An outline of the project structure](wiki/ProjectOutline)  
-[Webinterfaces for sending/viewing gcode](wiki/GcodeSenders)  
-[Various firmware implementations](wiki/Firmwares)  
-[Notes on packaging the code](wiki/Packaging)  
+- (Later)	Indeterminate, but nonetheless worthwhile implementing at some point.

_Sidebar.md

@@ -0,0 +1,40 @@
+## Table of contents
+
+1. The Doodle3D Wifibox  
+1.1 Introduction  
+1.2 Planning overview  
+1.3 Resources
+
+2. Firmware  
+[2.1 Overview](2.-Firmware/2.1-Overview.md)  
+2.2 RESTful API
+
+3. Research  
+3.1 Outline for self-update functionality  
+3.2 Notes on packaging the code  
+3.3 3D printing related  
+3.3.1 Webinterfaces for sending/viewing gcode  
+3.3.2 Various firmware implementations  
+
+4. Everything else  
+4.1 Miscellaneous notes  
+4.2 Analyzing uhttpd crashes  
+
+A1 Building OpenWrt  
+A2 Preparing OpenWrt for Wifibox  
+
+
+## ---old---
+
+[Building OpenWrt](wiki/BuildOpenwrt)  
+[Analyzing uhttpd crashes](wiki/UhttpdCrash)  
+[Outline for self-update functionality](wiki/SelfUpdater)  
+[Miscellaneous notes](wiki/MiscNotes)  
+[An outline of the project structure](wiki/ProjectOutline)  
+[Webinterfaces for sending/viewing gcode](wiki/GcodeSenders)  
+[Various firmware implementations](wiki/Firmwares)  
+[Notes on packaging the code](wiki/Packaging)  
+
+
+
+## ---aanpassen---