From 80911f2ce10f2483f03d5903dcaaa498d5d32d10 Mon Sep 17 00:00:00 2001 From: Joris Date: Thu, 23 Dec 2021 08:48:09 +0000 Subject: [PATCH] Update install_steps_ubuntu.md --- source/installation/install_steps_ubuntu.md | 58 --------------------- 1 file changed, 58 deletions(-) diff --git a/source/installation/install_steps_ubuntu.md b/source/installation/install_steps_ubuntu.md index cbbe080..d847924 100644 --- a/source/installation/install_steps_ubuntu.md +++ b/source/installation/install_steps_ubuntu.md @@ -66,61 +66,3 @@ Save (Strg-O) and close (Strg-X) 15. Restart the system. After restarting, the system is ready to be configured - -16. Find the IP adress of your computer -**- new console** -`ip a` - -17. Configure your Shelly -as long as your Shelly has not been given the credentials for a WLAN, it will create an access point (AP) for configuration. This AP will appear in your list of WLAN. -Connect to this Shelly-AP and connect to `192.168.33.1` in your browser. A configuration page should appear. -If your Shelly is already connected to your WLAN, you must find the assigned IP-Adress (e.g. by looking into your router). Enter this IP Adress in your browser and you will get the configuration page. - -18. MQTT Client setup -goto "Internet & Security" -> "Advanced - Developer Settings" -enable "MQTT" -enter the IP-Adress from Step 16 in the field "IP-Adress" -As we did not define MQTT credentials in mosquitto yet, no creadentials need to be filled in. -To find the "ID" of your Shelly activate "Use custom MQTT prefix" (but do not change it!). This should be somthing like: -`shelly1-123456789ABC` for a Shelly 1 -`shelly1pm-123456` for a Shelly 1PM -note this ID for later -**- save** -**- re-check the settings!** - -19. WLAN Client setup -goto "Internet & Security" -> "WIFI MODE - CLIENT" -Set WLAN Credentials - -20. Configure Diflouroborane -Open the file "bffh.dhall" in the GUI Editor (just by double-clicking it) -Change `Shelly_123` to your Shelly name, e.g. `shelly1-123456789ABC` (**case sensitive!, dash sensitive!**) in "Link up machines to actors" and in "actors". -Change the third IP-adress under "listens" to the IP-adress of your computer. -**- save** - -21. start Diflouroburane -change to the directory in the console where you checked for the ip-address -`cd BFFH/bffh/target/release` -load settings to Diflouroborane: -`./diflouroborane -c examples/bffh.dhall --load examples` -start Diflouroborane: -`./diflouroborane -c examples/bffh.dhall` - -**Important** -every time you change the bffh.dhal you need to reload the settings (otherwise the App will not connect to the server on restart): -`./diflouroborane -c examples/bffh.dhall --load examples` -and restart start Diflouroborane: -`./diflouroborane -c examples/bffh.dhall` - -Download the borepin APP as described previously -- start the App -- press: "Connect to new Server" -- press: Enter the IP of your computer in the "Host"-Field -- Enter your Username and Password. - -To connect to the demo instance -- start the App -- press: "Connect to new Server" -- press: "Demo Host Address" -- User: "Testuser" -- Passw: "secret"