FabInfra-Mirror/fabhardware.fabreader3
1
0
Fork 0
mirror of https://gitlab.com/fabinfra/fabhardware/fabreader3.git synced 2025-03-12 22:51:42 +01:00
Code Issues Packages Projects Releases Wiki Activity
fabhardware.fabreader3/Software/fab-reader2/components/rfal/Inc/rfal_analogConfigTbl.h

427 lines
34 KiB
C
Raw Blame History

/******************************************************************************
* \attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* www.st.com/myliberty
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*
* PROJECT: ST25R391x firmware
* Revision:
* LANGUAGE: ISO C99
*/
/*! \file rfal_analogConfig.h
*
* \author bkam
*
* \brief ST25R3911 Analog Configuration Settings
*
*/
#ifndef ST25R3911_ANALOGCONFIG_H
#define ST25R3911_ANALOGCONFIG_H
/*
******************************************************************************
* INCLUDES
******************************************************************************
*/
#include "rfal_analogConfig.h"
#include "st25r3911_com.h"
/*
******************************************************************************
* DEFINES
******************************************************************************
*/
/*
******************************************************************************
* GLOBAL MACROS
******************************************************************************
*/
/*! Macro for Configuration Setting with only one register-mask-value set:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1] */
#define MODE_ENTRY_1_REG(MODE, R0, M0, V0) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 1, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0)
/*! Macro for Configuration Setting with only two register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1] */
#define MODE_ENTRY_2_REG(MODE, R0, M0, V0, R1, M1, V1) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 2, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1)
/*! Macro for Configuration Setting with only three register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_3_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 3, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
/*! Macro for Configuration Setting with only four register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_4_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 4, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
/*! Macro for Configuration Setting with only five register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_5_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 5, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
/*! Macro for Configuration Setting with only six register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_6_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 6, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
/*! Macro for Configuration Setting with only seven register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_7_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 7, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
, (uint8_t)((R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
/*! Macro for Configuration Setting with only eight register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_8_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 8, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
, (uint8_t)((R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
, (uint8_t)((R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
/*! Macro for Configuration Setting with only nine register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_9_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU), 9, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
, (uint8_t)((R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
, (uint8_t)((R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
, (uint8_t)((R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
/*! Macro for Configuration Setting with only ten register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_10_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU),10, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
, (uint8_t)((R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
, (uint8_t)((R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
, (uint8_t)((R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
, (uint8_t)((R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
/*! Macro for Configuration Setting with eleven register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_11_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU),11, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
, (uint8_t)((R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
, (uint8_t)((R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
, (uint8_t)((R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
, (uint8_t)((R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
, (uint8_t)((R10) >> 8), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
/*! Macro for Configuration Setting with twelve register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_12_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU),12, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
, (uint8_t)((R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
, (uint8_t)((R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
, (uint8_t)((R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
, (uint8_t)((R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
, (uint8_t)((R10) >> 8), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
, (uint8_t)((R11) >> 8), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11) \
/*! Macro for Configuration Setting with thirteen register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_13_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11, R12, M12, V12) \
(uint8_t)((MODE) >> 8), (uint8_t)((MODE) & 0xFFU),13, (uint8_t)((R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
, (uint8_t)((R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
, (uint8_t)((R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
, (uint8_t)((R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
, (uint8_t)((R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
, (uint8_t)((R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
, (uint8_t)((R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
, (uint8_t)((R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
, (uint8_t)((R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
, (uint8_t)((R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
, (uint8_t)((R10) >> 8), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
, (uint8_t)((R11) >> 8), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11) \
, (uint8_t)((R12) >> 8), (uint8_t)((R12) & 0xFFU), (uint8_t)(M12), (uint8_t)(V12) \
/* Setting for approximately 14%: */
#define AM_MOD_DRIVER_LEVEL_DEFAULT 0xb9
/*
******************************************************************************
* GLOBAL DATA TYPES
******************************************************************************
*/
/* PRQA S 3406 1 # MISRA 8.6 - Externally generated table included by the library */ /* PRQA S 1514 1 # MISRA 8.9 - Externally generated table included by the library */
const uint8_t rfalAnalogConfigDefaultSettings[] = {
//****** Default Analog Configuration for Chip-Specific Reset. ******/
MODE_ENTRY_10_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_INIT)
, ST25R3911_REG_OP_CONTROL, 0x30, 0x10 /* default to AM */
, ST25R3911_REG_IO_CONF1, 0x06, 0x06 /* MCUCLK: HF clk off */
, ST25R3911_REG_IO_CONF1, (ST25R3911_REG_IO_CONF1_mask_out_cl | ST25R3911_REG_IO_CONF1_lf_clk_off), 0x07 /* MCUCLK: LF clk off */
, ST25R3911_REG_IO_CONF2, 0x18, 0x18 /* pull downs */
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_pm, 0x1U<<ST25R3911_REG_RX_CONF4_shift_rg2_pm /* increase digitizer window for PM */
, ST25R3911_REG_ANT_CAL_TARGET, 0xFF, 0x80 /* 90degrees */
, ST25R3911_REG_ANT_CAL_CONTROL, 0xF8, 0x00 /* trim value from calibrate antenna */
, ST25R3911_REG_AM_MOD_DEPTH_CONTROL, ST25R3911_REG_AM_MOD_DEPTH_CONTROL_am_s, ST25R3911_REG_AM_MOD_DEPTH_CONTROL_am_s /* AM modulated level is defined by RFO AM Modulated Level Def Reg, fixed setting, no automatic adjustment */
, ST25R3911_REG_FIELD_THRESHOLD, ST25R3911_REG_FIELD_THRESHOLD_mask_trg, ST25R3911_REG_FIELD_THRESHOLD_trg_75mV
, ST25R3911_REG_FIELD_THRESHOLD, ST25R3911_REG_FIELD_THRESHOLD_mask_rfe, ST25R3911_REG_FIELD_THRESHOLD_rfe_75mV
)
//****** Default Analog Configuration for Poll NFC-A Tx. ******/
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, 0xf0 /* Used for 848 TX: very high AM to keep wave shapes */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
)
, MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM! */
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, 0xf0 /* Used for 848 TX: very high AM to keep wave shapes */
)
//****** Default Analog Configuration for Poll NFC-A Rx. ******/
, MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, 0xff, 0x18
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x2U<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, 0x00 /* rx_tol Off */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x00
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x04
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x22
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x22
)
//****** Default Analog Configuration for Poll NFC-B Tx. ******/
, MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
)
//****** Default Analog Configuration for Poll NFC-B Rx. ******/
, MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, 0xff, 0x18
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1U<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x04
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x04
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x22
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x22
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_1695 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x6c
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_3390 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x6c
)
//****** Default Analog Configuration for Poll NFC-F Tx. ******/
, MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
)
//****** Default Analog Configuration for Poll NFC-F Common bitrate Rx. ******/
, MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, 0xff, 0x18
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1U<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x13 /* dev. from data sheet: lp 300kKz */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x0b /* dev. from data sheet: lp 600kHz */
)
//****** Default Analog Configuration for Poll NFC-V Common bitrate Tx ******/
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00
)
//****** Default Analog Configuration for Poll NFC-V Common bitrate Rx ******/
, MODE_ENTRY_4_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x0c /* use filter settings from table 9: "Recommended for 424/484 kHz sub-carrier" */
, ST25R3911_REG_RX_CONF3, 0xff, 0x18
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1U<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
)
//****** Default Analog Configuration for Poll AP2P Common bitrate Tx. ******/
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
)
, MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
)
, MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
)
//****** Default Analog Configuration for Poll AP2P Common bitrate Rx. ******/
, MODE_ENTRY_4_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_LISTEN_ON)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x45
, ST25R3911_REG_RX_CONF3, (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc), (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1U<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
)
, MODE_ENTRY_4_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x45
, ST25R3911_REG_RX_CONF3, (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc), (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1U<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0xc0
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
)
//****** Default Analog Configuration for Listen AP2P Common bitrate Tx. ******/
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
, ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
)
//****** Default Analog Configuration for Listen AP2P Common bitrate Rx. ******/
, MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF1, 0x7f, 0x45
, ST25R3911_REG_RX_CONF3, (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc), (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc)
, ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1U<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0xc0
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
)
, MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
, ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
)
};
#endif /* ST25R3911_ANALOGCONFIG_H */
Reference in New Issue View Git Blame Copy Permalink