vmario/BrailleRap
1
0
Fork 0
mirror of https://github.com/braillerap/BrailleRap.git synced 2025-06-08 01:49:59 +02:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of https://github.com/BrailleRapSP/BrailleRapSP

Browse Source
This commit is contained in:
Team BrailleRap-SP Philippe Pacotte Stéphane Godin 2018-03-17 21:26:53 +01:00
commit 25caf6cec2
3 changed files with 50 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
docs/assembling.rst
View File

@ -1,15 +1,51 @@
Assembling guide
================
Building the embossing "stylus"
-------------------------------
The embossing tool is made of an M3 screw, machined with a dremel like tool. the tip of the tool need to be smooth (avoid sharp tip that will tear the embossed material)
Assemble the embossing tool
---------------------------
#. Screw the brace on the electro-magnet axle.
#. Screw embossing "stylus" in the brace.
#. lock the sylus with a counter lock nut.
Preparing paper roll drive
--------------------------
We use epoxy glue to stick the sand paper on abs printed parts. Epoxy don't stick on ABS so we prepare the parts with light sanding and cyanoacrilat glue.
#. Print **x** paper roll **link to stl**.
#. sanding printed roll with sand Paper N°4 to scratch the printed surface where you want to stick sand paper.
#. "Paint" the printed parts with cyanoacrilat glue, let it dry.
#. Glue a piece of 180 sand paper on the part with bi-composant epoxy glue.
#. Let the roll dry for abu 25h depending of the epoxy glue you've used (we used standard epoxy and let the roll dry for about 24 hours)
Laser cut the box
-----------------
Material
You will need 3 sheets of plywood 5mm thick , 600 mm x 400mm.
Use the dxf files in https://github.com/BrailleRapSP/BrailleRapSP/tree/master/lasercut to lasercut the 3 sheets.
Assembling the box
-------------------
Start to glue the 4 sides of the box with wood glue, then glue the bottom. Assemble the 4 sides and the bottom, sticking them together with blue tape.
When the glue is dry (the time depending of the glue you have used), Start assembling the Y axis.
...
Preparing Y Axis
----------------
...
Assembling X Axis
-----------------

7
docs/bom.rst
View File

@ -3,7 +3,7 @@ Bill of material
Laser cut box
-------------
...
3 plywood sheets 5mm thick , 600 mm x 400mm size.
@ -61,6 +61,9 @@ x M3 washer
x BTR M4 10
4 BTR M4 50mm *partiellement filete*
3 Tap joint 15.1 mm inside diameter
1 Sand paper Sheet 180
...
=== =========================================
@ -70,7 +73,7 @@ Electronical parts
=== =========================================
Qty Type
=== =========================================
1 Electro-magnet *tau-826*
1 Electro-magnet *tau-826* 12V 2A
1 Veroboard or stripboard
1 1N4004 flyback diode or equivalent (12V 2A)
1 resistor 1K ohms

8
docs/buildembossingtool.rst Normal file
View File

@ -0,0 +1,8 @@
Building the embossing tool
===========================
Material
--------
The embossing tool is made of an M3 screw, machined with a dremel like tool.