Merge branch 'master' of https://github.com/BrailleRapSP/BrailleRapSP

docs/assembling.rst

@@ -1,15 +1,51 @@
 Assembling guide
 ================
 
+Building the embossing "stylus"
+-------------------------------
+The embossing tool is made of an M3 screw, machined with a dremel like tool. the tip of the tool need to be smooth (avoid sharp tip that will tear the embossed material)
+
+Assemble the embossing tool
+---------------------------
+
+#. Screw the brace on the electro-magnet axle. 
+#. Screw embossing "stylus" in the brace.
+#. lock the sylus with a counter lock nut.
+
+
+Preparing paper roll drive
+--------------------------
+
+We use epoxy glue to stick the sand paper on abs printed parts. Epoxy don't stick on ABS so we prepare the parts with light sanding and cyanoacrilat glue.
+ 
+#. Print **x** paper roll **link to stl**.
+#. sanding printed roll with sand Paper N°4 to scratch the printed surface where you want to stick sand paper.
+#. "Paint" the printed parts with cyanoacrilat glue, let it dry.
+#. Glue a piece of 180 sand paper on the part with bi-composant epoxy glue.
+#. Let the roll dry for abu 25h depending of the epoxy glue you've used (we used standard epoxy and let the roll dry for about 24 hours)
+ 
+Laser cut the box
+-----------------
+
+Material
+You will need 3 sheets of plywood 5mm thick , 600 mm x 400mm.
+
+
+Use the dxf files in https://github.com/BrailleRapSP/BrailleRapSP/tree/master/lasercut to lasercut the 3 sheets.
+
 
 
 Assembling the box
 -------------------
+Start to glue the 4 sides of the box with wood glue, then glue the bottom. Assemble the 4 sides and the bottom, sticking them together with blue tape.
+When the glue is dry (the time depending of the glue you have used), Start assembling the Y axis.
+
+
 ...
 
 Preparing Y Axis
 ----------------
-...
+
 
 Assembling X Axis
 -----------------

docs/bom.rst

@@ -3,7 +3,7 @@ Bill of material
 
 Laser cut box
 -------------
-...
+3 plywood sheets 5mm thick , 600 mm x 400mm size.
 
 
 
@@ -61,6 +61,9 @@ x   M3 washer
 x   BTR M4 10
 4   BTR M4 50mm *partiellement filete* 
 
+3   Tap joint 15.1 mm inside diameter
+1	Sand paper Sheet 180
+
 ...
 === =========================================
 
@@ -70,7 +73,7 @@ Electronical parts
 === =========================================
 Qty Type
 === =========================================
-1   Electro-magnet *tau-826*
+1   Electro-magnet *tau-826* 12V 2A
 1	Veroboard or stripboard
 1	1N4004 flyback diode or equivalent (12V 2A)
 1	resistor 1K ohms

docs/buildembossingtool.rst

@@ -0,0 +1,8 @@
+Building the embossing tool
+===========================
+
+Material
+--------
+
+The embossing tool is made of an M3 screw, machined with a dremel like tool.
+