changes in printer profile

This commit is contained in:
Mario Voigt 2021-07-25 18:59:13 +02:00
parent c02b131327
commit 1eeb17bfa5
7 changed files with 252757 additions and 252877 deletions

View File

@ -1,55 +0,0 @@
# generated by PrusaSlicer 2.2.0+win64 on 2020-10-24 at 12:17:42 UTC
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers = Trikarus
compatible_printers_condition =
compatible_prints = Trikarus
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 2
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #C0C0C0
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 18.81
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = "offical data from spool:\n- density: 1.24 g/cm^3\n- diameter: 1.75 mm +/- 0.05 mm\n- print temperature: 215 C +/- 15 C"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 0
first_layer_temperature = 205
inherits =
max_fan_speed = 100
min_fan_speed = 65
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; Filament gcode\n"
temperature = 215

View File

@ -1,55 +0,0 @@
# generated by PrusaSlicer 2.2.0+win64 on 2020-07-07 at 17:29:59 UTC
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers = Trikarus
compatible_printers_condition =
compatible_prints = Trikarus
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 2
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #C0C0C0
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 18.81
filament_density = 1.25
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = "offical data from spool:\n- density: ?\n- diameter: 1.75 mm +/- 0.05 mm\n- print temperature: 200 C -220 C"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 0
first_layer_temperature = 205
inherits =
max_fan_speed = 100
min_fan_speed = 65
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; Filament gcode\n"
temperature = 225

View File

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.2.0+win64 on 2020-07-10 at 21:57:59 UTC
# generated by PrusaSlicer 2.2.0 on 2021-07-25 at 16:56:32 UTC
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers = Trikarus
@ -8,7 +8,7 @@ compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 2
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
extrusion_multiplier = 0.9
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
@ -18,7 +18,7 @@ filament_cooling_moves = 4
filament_cost = 18.81
filament_density = 1.25
filament_deretract_speed = nil
filament_diameter = 1.8
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
@ -45,7 +45,7 @@ filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 0
first_layer_temperature = 205
first_layer_temperature = 210
inherits =
max_fan_speed = 100
min_fan_speed = 65

View File

@ -1,7 +1,6 @@
# generated by PrusaSlicer 2.3.1+win64 on 2021-06-20 at 13:50:41 UTC
# generated by PrusaSlicer 2.2.0 on 2021-07-25 at 16:56:30 UTC
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = rectilinear
bottom_fill_pattern = concentric
bottom_solid_layers = 2
bottom_solid_min_thickness = 0
bridge_acceleration = 0
@ -10,7 +9,7 @@ bridge_flow_ratio = 1
bridge_speed = 33
brim_width = 0
clip_multipart_objects = 1
compatible_printers = Trikarus
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 0
@ -27,17 +26,15 @@ extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 100%
fill_pattern = rectilinear
fill_pattern = concentric
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_extrusion_width = 120%
first_layer_height = 100%
first_layer_speed = 20%
first_layer_speed = 20
gap_fill_speed = 11
gcode_comments = 0
gcode_label_objects = 0
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
@ -47,14 +44,9 @@ infill_overlap = 35%
infill_speed = 45
inherits =
interface_shells = 0
ironing = 1
ironing_flowrate = 10%
ironing_spacing = 0.7
ironing_speed = 15
ironing_type = top
layer_height = 1
max_print_speed = 50
max_volumetric_speed = 110
max_volumetric_speed = 50
min_skirt_length = 100
notes =
only_retract_when_crossing_perimeters = 1
@ -84,9 +76,9 @@ solid_infill_extrusion_width = 0
solid_infill_speed = 33%
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material = 1
support_material_angle = 0
support_material_auto = 1
support_material_auto = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
@ -104,9 +96,9 @@ support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
thin_walls = 0
threads = 8
top_fill_pattern = rectilinear
thin_walls = 1
threads = 6
top_fill_pattern = concentric
top_infill_extrusion_width = 0
top_solid_infill_speed = 60%
top_solid_layers = 4

View File

@ -1,10 +1,9 @@
# generated by PrusaSlicer 2.3.1+win64 on 2021-06-20 at 13:47:44 UTC
bed_custom_model = C:\\Users\\tomate\\AppData\\Roaming\\PrusaSlicer\\printer\\trikarus-bed.stl
bed_custom_texture = C:\\Users\\tomate\\AppData\\Roaming\\PrusaSlicer\\printer\\trikarus-bed.svg
# generated by PrusaSlicer 2.2.0 on 2021-07-25 at 16:56:35 UTC
bed_custom_model = /home/tomate/.PrusaSlicer/printer/trikarus-bed.stl
bed_custom_texture = /home/tomate/.PrusaSlicer/printer/trikarus-bed.svg
bed_shape = 498.097x43.5779,492.404x86.8241,482.963x129.41,469.846x171.01,453.154x211.309,433.013x250,409.576x286.788,383.022x321.394,353.553x353.553,321.394x383.022,286.788x409.576,250x433.013,211.309x453.154,171.01x469.846,129.41x482.963,86.8241x492.404,43.5779x498.097,3.06162e-14x500,-43.5779x498.097,-86.8241x492.404,-129.41x482.963,-171.01x469.846,-211.309x453.154,-250x433.013,-286.788x409.576,-321.394x383.022,-353.553x353.553,-383.022x321.394,-409.576x286.788,-433.013x250,-453.154x211.309,-469.846x171.01,-482.963x129.41,-492.404x86.8241,-498.097x43.5779,-500x6.12323e-14,-498.097x-43.5779,-492.404x-86.8241,-482.963x-129.41,-469.846x-171.01,-453.154x-211.309,-433.013x-250,-409.576x-286.788,-383.022x-321.394,-353.553x-353.553,-321.394x-383.022,-286.788x-409.576,-250x-433.013,-211.309x-453.154,-171.01x-469.846,-129.41x-482.963,-86.8241x-492.404,-43.5779x-498.097,-9.18485e-14x-500,43.5779x-498.097,86.8241x-492.404,129.41x-482.963,171.01x-469.846,211.309x-453.154,250x-433.013,286.788x-409.576,321.394x-383.022,353.553x-353.553,383.022x-321.394,409.576x-286.788,433.013x-250,453.154x-211.309,469.846x-171.01,482.963x-129.41,492.404x-86.8241,498.097x-43.5779,500x-1.22465e-13
before_layer_gcode =
between_objects_gcode =
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
@ -19,7 +18,6 @@ high_current_on_filament_swap = 0
host_type = duet
inherits =
layer_gcode =
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 1000,1000
machine_max_acceleration_extruding = 1500,1500
machine_max_acceleration_retracting = 1500,1500
@ -41,10 +39,9 @@ max_print_height = 1200
min_layer_height = 0.3
nozzle_diameter = 1.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host =
printer_model =
printer_notes = - M203 command in PrusaSlicer takes mm/second but Duet RRF takes those values as mm/minute. So you need to enter the mm/minute values without conversion\n- M73 not supported by RRF
printer_notes = - M203 command in PrusaSlicer takes mm/second but Duet RRF takes those values as mm/minute. So you need to enter the mm/minute values without conversion\n- M73 not supported by RRF\n- retraction is configured by firmware and is set to M207 S0.8 R0.0 F2500 Z0.8 (0.8 mm) - so we skip to use the suggestion of 3 mm in PrusaSlicer (it is disabled)
printer_settings_id = Trikarus
printer_technology = FFF
printer_variant =
@ -52,7 +49,7 @@ printer_vendor =
printhost_apikey =
printhost_cafile =
remaining_times = 0
retract_before_travel = 20
retract_before_travel = 30
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 3
@ -63,10 +60,11 @@ retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
silent_mode = 1
serial_port =
serial_speed = 250000
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = G28 ;reset coordinates - you must delete the files homex.g and homey.g on Duet Web Control because they contain dangerious moves when using default DWC config\n;deactivated stuff:\n;G92 X0 Y0 Z0 ;reset coordinates - does not always work so we use preceding G28\n;M106 P2 S0 ;turn off laser pointers - this is done by sms_prepare.sh script. no need to do twice\nM117 "Starting new GCode print job" ;M291 PMESSAGE does not work here. It just won't be displayed while printing
template_custom_gcode =
thumbnails =
toolchange_gcode =
use_firmware_retraction = 1