important slicer profile changes:

- first layer height from 110% to 100%
- infill overlap from 25% to 35%
- enabled ironing. set it to 0.4 mm and 20 mm/s speed
- reduced bed height to 1200mm due to max. size support issue. See https://github.com/prusa3d/PrusaSlicer/issues/6072
- retract travel distance from 2 to 20 mm to skip short segments (clogging issue)
- reduced support material speed to avoid clogging issue
- disabled thin wall detection because it made trouble at some models

prusaslicer_profile/config.ini

@@ -1,5 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-07-11 at 20:15:29 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-06-19 at 21:40:35 UTC
 avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bed_custom_model = trikarus-bed.stl
 bed_custom_texture = trikarus-bed.svg
 bed_shape = 498.097x43.5779,492.404x86.8241,482.963x129.41,469.846x171.01,453.154x211.309,433.013x250,409.576x286.788,383.022x321.394,353.553x353.553,321.394x383.022,286.788x409.576,250x433.013,211.309x453.154,171.01x469.846,129.41x482.963,86.8241x492.404,43.5779x498.097,3.06162e-14x500,-43.5779x498.097,-86.8241x492.404,-129.41x482.963,-171.01x469.846,-211.309x453.154,-250x433.013,-286.788x409.576,-321.394x383.022,-353.553x353.553,-383.022x321.394,-409.576x286.788,-433.013x250,-453.154x211.309,-469.846x171.01,-482.963x129.41,-492.404x86.8241,-498.097x43.5779,-500x6.12323e-14,-498.097x-43.5779,-492.404x-86.8241,-482.963x-129.41,-469.846x-171.01,-453.154x-211.309,-433.013x-250,-409.576x-286.788,-383.022x-321.394,-353.553x-353.553,-321.394x-383.022,-286.788x-409.576,-250x-433.013,-211.309x-453.154,-171.01x-469.846,-129.41x-482.963,-86.8241x-492.404,-43.5779x-498.097,-9.18485e-14x-500,43.5779x-498.097,86.8241x-492.404,129.41x-482.963,171.01x-469.846,211.309x-453.154,250x-433.013,286.788x-409.576,321.394x-383.022,353.553x-353.553,383.022x-321.394,409.576x-286.788,433.013x-250,453.154x-211.309,469.846x-171.01,482.963x-129.41,492.404x-86.8241,498.097x-43.5779,500x-1.22465e-13
 bed_temperature = 0
@@ -15,6 +17,7 @@ bridge_flow_ratio = 1
 bridge_speed = 60
 brim_width = 0
 clip_multipart_objects = 1
+color_change_gcode = M600
 colorprint_heights = 
 complete_objects = 0
 cooling = 1
@@ -44,22 +47,22 @@ extruder_offset = 0x0
 extrusion_axis = E
 extrusion_multiplier = 1
 extrusion_width = 1.57
-fan_always_on = 1
+fan_always_on = 0
 fan_below_layer_time = 60
-filament_colour = #FFFFFF
+filament_colour = #C0C0C0
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cost = 18.81
-filament_density = 1.25
+filament_density = 1.24
 filament_deretract_speed = nil
-filament_diameter = 1.8
+filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "offical data from spool:\n- density: 1.25 g/cm^3\n- diameter: 1.75 mm +/- 0.05 mm (90% of all filament spools below +/- 0.02 mm)\n- print temperature: 205 C +/- 10 C"
+filament_notes = "offical data from spool:\n- density: 1.24 g/cm^3\n- diameter: 1.75 mm +/- 0.05 mm\n- print temperature: 215 C +/- 15 C"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
@@ -70,8 +73,9 @@ filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
 filament_retract_speed = nil
-filament_settings_id = "Trikarus - Redline Filament PLA"
+filament_settings_id = "Trikarus - Das Filament PLA"
 filament_soluble = 0
+filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = PLA
 filament_unload_time = 0
@@ -85,9 +89,10 @@ fill_pattern = gyroid
 first_layer_acceleration = 0
 first_layer_bed_temperature = 0
 first_layer_extrusion_width = 1.47
-first_layer_height = 110%
+first_layer_height = 100%
 first_layer_speed = 20%
 first_layer_temperature = 205
+full_fan_speed_layer = 0
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_flavor = marlin
@@ -95,16 +100,24 @@ gcode_label_objects = 0
 high_current_on_filament_swap = 0
 host_type = duet
 infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 1.57
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 25%
+infill_overlap = 35%
 infill_speed = 45
 interface_shells = 0
+ironing = 1
+ironing_flowrate = 15%
+ironing_spacing = 0.4
+ironing_speed = 20
+ironing_type = top
 layer_gcode = 
 layer_height = 1
+machine_limits_usage = emit_to_gcode
 machine_max_acceleration_e = 1000,1000
 machine_max_acceleration_extruding = 1500,1500
 machine_max_acceleration_retracting = 1500,1500
@@ -123,7 +136,7 @@ machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
 max_fan_speed = 100
 max_layer_height = 1.4
-max_print_height = 2000
+max_print_height = 1200
 max_print_speed = 50
 max_volumetric_speed = 110
 min_fan_speed = 65
@@ -137,11 +150,13 @@ ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1
 parking_pos_retraction = 92
+pause_print_gcode = M601
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 1.57
 perimeter_speed = 35
 perimeters = 2
+physical_printer_settings_id = 
 post_process = 
 print_host = 
 print_settings_id = Trikarus
@@ -156,7 +171,7 @@ printhost_cafile =
 raft_layers = 0
 remaining_times = 0
 resolution = 0
-retract_before_travel = 2
+retract_before_travel = 20
 retract_before_wipe = 0%
 retract_layer_change = 1
 retract_length = 3
@@ -168,8 +183,6 @@ retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 60
 seam_position = nearest
-serial_port = 
-serial_speed = 250000
 silent_mode = 1
 single_extruder_multi_material = 0
 single_extruder_multi_material_priming = 1
@@ -188,7 +201,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 start_filament_gcode = "; Filament gcode\n"
 start_gcode = G28 ;reset coordinates - you must delete the files homex.g and homey.g on Duet Web Control because they contain dangerious moves when using default DWC config\n;deactivated stuff:\n;G92 X0 Y0 Z0 ;reset coordinates - does not always work so we use preceding G28\n;M106 P2 S0 ;turn off laser pointers - this is done by sms_prepare.sh script. no need to do twice\nM117 "Starting new GCode print job" ;M291 PMESSAGE does not work here. It just won't be displayed while printing
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 1
@@ -203,20 +216,21 @@ support_material_interface_spacing = 4
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 10
-support_material_speed = 60
+support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 0
 support_material_with_sheath = 1
 support_material_xy_spacing = 50%
 temperature = 215
-thin_walls = 1
+template_custom_gcode = 
+thin_walls = 0
 threads = 8
 thumbnails = 
 toolchange_gcode = 
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.4
 top_solid_infill_speed = 30
-top_solid_layers = 2
+top_solid_layers = 4
 top_solid_min_thickness = 0
 travel_speed = 130
 use_firmware_retraction = 1