vmario/doodle3d-firmware

Fork 0

mirror of https://github.com/Doodle3D/doodle3d-firmware.git synced 2024-11-14 01:37:56 +01:00

Unknown 2c01bcbe07 0.10.12-b version & release notes

2017-01-12 15:33:00 +01:00

10 KiB

Raw Blame History

Changelog

0.10.12-b (12 jan 2017)

Post install update to config for changes in 0.10.10 (fixes print3d logging)

0.10.12-a (26 jul 2016)

Added Ultimaker Original Plus (Thanks Remco)
Added extra usb drivers

0.10.11 0.10.11-a (25 may 2016)

After pressing the reset button for about 4 seconds the WiFi-Box will go to access point mode. Useful for when you can't reach it.
Becomes access point when it can't connect to WiFi network.
Handles more clients by tweaking the uhttpd config.
Print3D isn't killed when there is no memory available.
New banner (shown after ssh login)
Ultimaker 2 type printers show status information on display.

0.10.10 (11 may 2016)

Logging client version info to console.
Logging less when printing to makerbot/wanhao
Logging API time info
Included version number file in logfiles
Fixed stopping while sending

0.10.10-e (21 apr 2016)

Fixed Makerbot end gcode that prevented prints or stopping prints to finish.

0.10.10-d (20 apr 2016)

Allow print part sequence numbers to be retrieved
Sequence numbers are send back when sending print parts
When WiFi-Box responds that print part was already received the client will send the next part.

0.10.10-c (1 apr 2016)

Quicker log rotation

0.10.10-b (21 mrt 2016)

Logrotation (making sure older logs are removed)
Improved logging.
Always log initial printer communication
loglite improvements, added readme

0.10.10-a (24 feb 2016)

Max buffer size check: the WiFi-Box can now indicate through the API that its buffer is full and it won't accept new gcode.
Buffer information is communicated through the API so all clients can handle this properly. The Doodle3D client will stop sending and waits until it drops below 75%. It will check this every 30 seconds.
Improved progress indication: when sending a print the total number of lines can be added, causing the total lines reported through the API to be correct, instead of being approximated to be total lines in buffer, which keeps increasing while a print is still being sent.
When sending print parts, sequence numbers can be added which will be checked for correctness.
The stop button now stays enabled while still sending a print.
Made firmware log format consistent with print3d's.
Fixed local IP parsing pattern in firmware.
Improved log messages and log messages formatting.
Added loglite utility which enables filtering and coloring of logs.
Won't attempt sign-in when in access point mode.
More consistent error reporting from API.
API d3dapi/printer/print's 'first' parameter has been deprecated in favor of a more descriptive 'clear' parameter.
Support for CraftBot PLUS printer.

0.10.9 (11 jan 2016)

0.10.8 (11 jan 2016)

0.10.8-b (7 jan 2016)

Logging less by default, fixing some pretty serious memory issues, which could cause the WiFi-box to 'crash' while printing bigger files. Log level setting, enabling users to log more if they run into problems. For better adhesion we extruded even while traveling on the bottom layers, we now made it configurable and turned it off by default.
Fixed month display of releases in settings screen.

0.10.8-a (11 nov 2015)

Added ch341 and cp210x usb-serial drivers to diffconfig

0.10.7 (21 aug 2015)

Added ColiDo printer profiles

0.10.6 (17 jun 2015)

0.10.6-rc3 (17 jun 2015)

0.10.6-rc2 (16 jun 2015)

0.10.6-rc1 (16 jun 2015)

This release sees several connectivity bugs resolved as we continue to look to create the most stable experience we can offer for Doodle3D users. A new addition that has been realized in that the filament thickness is now printer dependent. This is important for printers that use 1,75mm filament. When changing the printer type it switches automatically. Please contact us for better filament thickness defaults. For more details please review the notes below:

General:

Updated OpenWRT (the operating system) to 14.07.
Fixed several big issues around connecting to printers.
Big files for Marlin based printers are processed faster.
Target temperature retrieval is improved.
Changed the Accesspoint's settings to the default because of startup issues (country: NL to US, channel: 11 to 1).
Improved 404 page.

Additions

Filament thickness is now printer type dependent and automatically change when selecting a printer. (Please contact us for better filament thickness defaults.)

Support for more 3D printers:

DoodleDream
3Dison
LulzBot TAZ 4
Wanhao Duplicator 4
Ultimaker 2 Go

Improvements for Makerbot based printers (like the Wanhao printer):

Prevent that the nozzle bumps into the bed when starting a new print.
Prevent that the nozzle moves though a print after printing.

0.10.5-a (2 Feb 2015)

Removed gray lines where printer needs to 'travel' (move without printing)
Enabled traveling also for first couple of layers. This prevents straight lines crossing your print
Added url parameter l=1 which disables parts of the user interface. The 'Print' button 'saves' the sketch instead of sending it to the printer. This is useful for public events where a moderator needs to start prints instead of the user.
Fixed a small bug where the last sketch was skipped when pressing the previous button for the first time.
changed WordArt font to a self-made single line handwritting font. This font prints faster and is more playful.

0.10.5

Added the PhotoGuide feature which is kind of a manual Scan & Trace. Use a photo as a background image and create your doodle on top of it.
Added support for the '3Dison plus' printer.
Added a File Manager for downloading, uploading and deleting sketches (can be opened via the Settings Panel)
Improved the way sketches are loaded
Fixed scrolling issue in Settings Panel

0.10.4-photoguide3 (10th oct 2014)

0.10.4-photoguide2 (9th oct 2014)

0.10.4-photoguide (9th oct 2014)

Added the PhotoGuide feature which is kind of a manual Scan & Trace. Use a photo as a background image and create your doodle on top of it.
Added support for the '3Dison plus' printer.

0.10.4 (28th may 2014)

Pulled improvements by Ultimaker.
Fixed printing isues with gcode containing whitelines.
Added Builder3D to printer types
iOS captive portal fix

0.10.3 (9th apr 2014)

Fixed Makerbot issue where printer driver didn't get past connecting state

0.10.2-makerbotfix (27th mar 2014)

Fixed Makerbot issue where printer driver didn't get past connecting state