vmario/fabaccess-docs
1
0
Fork 0
mirror of https://gitlab.com/fabinfra/fabaccess/docs.git synced 2024-12-22 20:13:48 +01:00
Code Issues Packages Projects Releases Wiki Activity

Update install_steps_ubuntu.md

Browse Source
This commit is contained in:
Joris 2021-12-23 08:48:09 +00:00
parent b6a371e85c
commit 80911f2ce1
1 changed files with 0 additions and 58 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

58
source/installation/install_steps_ubuntu.md
View File

@ -66,61 +66,3 @@ Save (Strg-O) and close (Strg-X)
15. Restart the system. 15. Restart the system.
After restarting, the system is ready to be configured After restarting, the system is ready to be configured
16. Find the IP adress of your computer
**- new console**
`ip a`
17. Configure your Shelly
as long as your Shelly has not been given the credentials for a WLAN, it will create an access point (AP) for configuration. This AP will appear in your list of WLAN.
Connect to this Shelly-AP and connect to `192.168.33.1` in your browser. A configuration page should appear.
If your Shelly is already connected to your WLAN, you must find the assigned IP-Adress (e.g. by looking into your router). Enter this IP Adress in your browser and you will get the configuration page.
18. MQTT Client setup
goto "Internet & Security" -> "Advanced - Developer Settings"
enable "MQTT"
enter the IP-Adress from Step 16 in the field "IP-Adress"
As we did not define MQTT credentials in mosquitto yet, no creadentials need to be filled in.
To find the "ID" of your Shelly activate "Use custom MQTT prefix" (but do not change it!). This should be somthing like:
`shelly1-123456789ABC` for a Shelly 1
`shelly1pm-123456` for a Shelly 1PM
note this ID for later
**- save**
**- re-check the settings!**
19. WLAN Client setup
goto "Internet & Security" -> "WIFI MODE - CLIENT"
Set WLAN Credentials
20. Configure Diflouroborane
Open the file "bffh.dhall" in the GUI Editor (just by double-clicking it)
Change `Shelly_123` to your Shelly name, e.g. `shelly1-123456789ABC` (**case sensitive!, dash sensitive!**) in "Link up machines to actors" and in "actors".
Change the third IP-adress under "listens" to the IP-adress of your computer.
**- save**
21. start Diflouroburane
change to the directory in the console where you checked for the ip-address
`cd BFFH/bffh/target/release`
load settings to Diflouroborane:
`./diflouroborane -c examples/bffh.dhall --load examples`
start Diflouroborane:
`./diflouroborane -c examples/bffh.dhall`
**Important**
every time you change the bffh.dhal you need to reload the settings (otherwise the App will not connect to the server on restart):
`./diflouroborane -c examples/bffh.dhall --load examples`
and restart start Diflouroborane:
`./diflouroborane -c examples/bffh.dhall`
Download the borepin APP as described previously
- start the App
- press: "Connect to new Server"
- press: Enter the IP of your computer in the "Host"-Field
- Enter your Username and Password.
To connect to the demo instance
- start the App
- press: "Connect to new Server"
- press: "Demo Host Address"
- User: "Testuser"
- Passw: "secret"