vmario/fabaccess-docs
1
0
Fork 0
mirror of https://gitlab.com/fabinfra/fabaccess/docs.git synced 2024-07-04 23:40:45 +02:00
Code Issues Packages Projects Releases Wiki Activity
cd619cbf56
fabaccess-docs/source/usage/Get it Running - Step by Step.md
Joris cd619cbf56 Update Get it Running - Step by Step.md
2021-12-23 09:15:00 +00:00

2.9 KiB
Raw Blame History

*FabAcess Step By Step

This document provides a step by step Instruction on how to get FabAcess running. At the end of this description you will have:

  • 2 Users registered to your system
  • 2 Shellies registered to you system
  • 1 Shelly configured as a door-opener
  • 1 Shelly configured to identify if a machine is just switched on or realy running
  • 2 QR-Codes generate to acess a machine

** Step 1 Installing the BFFH-Server there are multiple ways to install the BFFH server. This can bei either done via

  • a docker - see docker installation document.

  1. Find the IP adress of your computer - new console ip a

  2. Configure your Shelly as long as your Shelly has not been given the credentials for a WLAN, it will create an access point (AP) for configuration. This AP will appear in your list of WLAN. Connect to this Shelly-AP and connect to 192.168.33.1 in your browser. A configuration page should appear. If your Shelly is already connected to your WLAN, you must find the assigned IP-Adress (e.g. by looking into your router). Enter this IP Adress in your browser and you will get the configuration page.

  3. MQTT Client setup goto "Internet & Security" -> "Advanced - Developer Settings" enable "MQTT" enter the IP-Adress from Step 16 in the field "IP-Adress" As we did not define MQTT credentials in mosquitto yet, no creadentials need to be filled in. To find the "ID" of your Shelly activate "Use custom MQTT prefix" (but do not change it!). This should be somthing like: shelly1-123456789ABC for a Shelly 1 shelly1pm-123456 for a Shelly 1PM note this ID for later - save - re-check the settings!

  4. WLAN Client setup goto "Internet & Security" -> "WIFI MODE - CLIENT" Set WLAN Credentials

  5. Configure Diflouroborane Open the file "bffh.dhall" in the GUI Editor (just by double-clicking it) Change Shelly_123 to your Shelly name, e.g. shelly1-123456789ABC (case sensitive!, dash sensitive!) in "Link up machines to actors" and in "actors". Change the third IP-adress under "listens" to the IP-adress of your computer. - save

  6. start Diflouroburane change to the directory in the console where you checked for the ip-address cd BFFH/bffh/target/release load settings to Diflouroborane: ./diflouroborane -c examples/bffh.dhall --load examples start Diflouroborane: ./diflouroborane -c examples/bffh.dhall

Important every time you change the bffh.dhal you need to reload the settings (otherwise the App will not connect to the server on restart): ./diflouroborane -c examples/bffh.dhall --load examples and restart start Diflouroborane: ./diflouroborane -c examples/bffh.dhall

Download the borepin APP as described previously

  • start the App
  • press: "Connect to new Server"
  • press: Enter the IP of your computer in the "Host"-Field
  • Enter your Username and Password.

To connect to the demo instance

  • start the App
  • press: "Connect to new Server"
  • press: "Demo Host Address"
  • User: "Testuser"
  • Passw: "secret"